The patch titled fbdev: add new TMIO framebuffer driver has been removed from the -mm tree. Its filename was fbdev-add-new-tmio-framebuffer-driver.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: fbdev: add new TMIO framebuffer driver From: Dmitry Baryshkov <dbaryshkov@xxxxxxxxx> Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB chips. Signed-off-by: Dmitry Baryshkov <dbaryshkov@xxxxxxxxx> Cc: Ian Molton <spyro@xxxxxxx> Acked-by: Samuel Ortiz <sameo@xxxxxxxxxxxxxx> Acked-by: Krzysztof Helt <krzysztof.h1@xxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/video/Kconfig | 22 drivers/video/Makefile | 1 drivers/video/tmiofb.c | 1050 +++++++++++++++++++++++++++++++++++++ include/linux/mfd/tmio.h | 19 4 files changed, 1092 insertions(+) diff -puN drivers/video/Kconfig~fbdev-add-new-tmio-framebuffer-driver drivers/video/Kconfig --- a/drivers/video/Kconfig~fbdev-add-new-tmio-framebuffer-driver +++ a/drivers/video/Kconfig @@ -1896,6 +1896,28 @@ config FB_SH_MOBILE_LCDC ---help--- Frame buffer driver for the on-chip SH-Mobile LCD controller. +config FB_TMIO + tristate "Toshiba Mobile IO FrameBuffer support" + depends on FB && MFD_CORE + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the Toshiba Mobile IO integrated as found + on the Sharp SL-6000 series + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called tmiofb. If you want to compile it as a module, + say M here and read <file:Documentation/kbuild/modules.txt>. + + If unsure, say N. + +config FB_TMIO_ACCELL + bool "tmiofb acceleration" + depends on FB_TMIO + default y + config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" depends on FB && ARCH_S3C2410 diff -puN drivers/video/Makefile~fbdev-add-new-tmio-framebuffer-driver drivers/video/Makefile --- a/drivers/video/Makefile~fbdev-add-new-tmio-framebuffer-driver +++ a/drivers/video/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o obj-$(CONFIG_FB_PXA) += pxafb.o obj-$(CONFIG_FB_W100) += w100fb.o +obj-$(CONFIG_FB_TMIO) += tmiofb.o obj-$(CONFIG_FB_AU1100) += au1100fb.o obj-$(CONFIG_FB_AU1200) += au1200fb.o obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o diff -puN /dev/null drivers/video/tmiofb.c --- /dev/null +++ a/drivers/video/tmiofb.c @@ -0,0 +1,1050 @@ +/* + * Frame Buffer Device for Toshiba Mobile IO(TMIO) controller + * + * Copyright(C) 2005-2006 Chris Humbert + * Copyright(C) 2005 Dirk Opfer + * Copytight(C) 2007,2008 Dmitry Baryshkov + * + * Based on: + * drivers/video/w100fb.c + * code written by Sharp/Lineo for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation; + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +/* Why should fb driver call console functions? because acquire_console_sem() */ +#include <linux/console.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tmio.h> +#include <linux/uaccess.h> + +/* + * accelerator commands + */ +#define TMIOFB_ACC_CSADR(x) (0x00000000 | ((x) & 0x001ffffe)) +#define TMIOFB_ACC_CHPIX(x) (0x01000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_CVPIX(x) (0x02000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_PSADR(x) (0x03000000 | ((x) & 0x00fffffe)) +#define TMIOFB_ACC_PHPIX(x) (0x04000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_PVPIX(x) (0x05000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_PHOFS(x) (0x06000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_PVOFS(x) (0x07000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_POADR(x) (0x08000000 | ((x) & 0x00fffffe)) +#define TMIOFB_ACC_RSTR(x) (0x09000000 | ((x) & 0x000000ff)) +#define TMIOFB_ACC_TCLOR(x) (0x0A000000 | ((x) & 0x0000ffff)) +#define TMIOFB_ACC_FILL(x) (0x0B000000 | ((x) & 0x0000ffff)) +#define TMIOFB_ACC_DSADR(x) (0x0C000000 | ((x) & 0x00fffffe)) +#define TMIOFB_ACC_SSADR(x) (0x0D000000 | ((x) & 0x00fffffe)) +#define TMIOFB_ACC_DHPIX(x) (0x0E000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_DVPIX(x) (0x0F000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_SHPIX(x) (0x10000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_SVPIX(x) (0x11000000 | ((x) & 0x000003ff)) +#define TMIOFB_ACC_LBINI(x) (0x12000000 | ((x) & 0x0000ffff)) +#define TMIOFB_ACC_LBK2(x) (0x13000000 | ((x) & 0x0000ffff)) +#define TMIOFB_ACC_SHBINI(x) (0x14000000 | ((x) & 0x0000ffff)) +#define TMIOFB_ACC_SHBK2(x) (0x15000000 | ((x) & 0x0000ffff)) +#define TMIOFB_ACC_SVBINI(x) (0x16000000 | ((x) & 0x0000ffff)) +#define TMIOFB_ACC_SVBK2(x) (0x17000000 | ((x) & 0x0000ffff)) + +#define TMIOFB_ACC_CMGO 0x20000000 +#define TMIOFB_ACC_CMGO_CEND 0x00000001 +#define TMIOFB_ACC_CMGO_INT 0x00000002 +#define TMIOFB_ACC_CMGO_CMOD 0x00000010 +#define TMIOFB_ACC_CMGO_CDVRV 0x00000020 +#define TMIOFB_ACC_CMGO_CDHRV 0x00000040 +#define TMIOFB_ACC_CMGO_RUND 0x00008000 +#define TMIOFB_ACC_SCGO 0x21000000 +#define TMIOFB_ACC_SCGO_CEND 0x00000001 +#define TMIOFB_ACC_SCGO_INT 0x00000002 +#define TMIOFB_ACC_SCGO_ROP3 0x00000004 +#define TMIOFB_ACC_SCGO_TRNS 0x00000008 +#define TMIOFB_ACC_SCGO_DVRV 0x00000010 +#define TMIOFB_ACC_SCGO_DHRV 0x00000020 +#define TMIOFB_ACC_SCGO_SVRV 0x00000040 +#define TMIOFB_ACC_SCGO_SHRV 0x00000080 +#define TMIOFB_ACC_SCGO_DSTXY 0x00008000 +#define TMIOFB_ACC_SBGO 0x22000000 +#define TMIOFB_ACC_SBGO_CEND 0x00000001 +#define TMIOFB_ACC_SBGO_INT 0x00000002 +#define TMIOFB_ACC_SBGO_DVRV 0x00000010 +#define TMIOFB_ACC_SBGO_DHRV 0x00000020 +#define TMIOFB_ACC_SBGO_SVRV 0x00000040 +#define TMIOFB_ACC_SBGO_SHRV 0x00000080 +#define TMIOFB_ACC_SBGO_SBMD 0x00000100 +#define TMIOFB_ACC_FLGO 0x23000000 +#define TMIOFB_ACC_FLGO_CEND 0x00000001 +#define TMIOFB_ACC_FLGO_INT 0x00000002 +#define TMIOFB_ACC_FLGO_ROP3 0x00000004 +#define TMIOFB_ACC_LDGO 0x24000000 +#define TMIOFB_ACC_LDGO_CEND 0x00000001 +#define TMIOFB_ACC_LDGO_INT 0x00000002 +#define TMIOFB_ACC_LDGO_ROP3 0x00000004 +#define TMIOFB_ACC_LDGO_ENDPX 0x00000008 +#define TMIOFB_ACC_LDGO_LVRV 0x00000010 +#define TMIOFB_ACC_LDGO_LHRV 0x00000020 +#define TMIOFB_ACC_LDGO_LDMOD 0x00000040 + +/* a FIFO is always allocated, even if acceleration is not used */ +#define TMIOFB_FIFO_SIZE 512 + +/* + * LCD Host Controller Configuration Register + * + * This iomem area supports only 16-bit IO. + */ +#define CCR_CMD 0x04 /* Command */ +#define CCR_REVID 0x08 /* Revision ID */ +#define CCR_BASEL 0x10 /* LCD Control Reg Base Addr Low */ +#define CCR_BASEH 0x12 /* LCD Control Reg Base Addr High */ +#define CCR_UGCC 0x40 /* Unified Gated Clock Control */ +#define CCR_GCC 0x42 /* Gated Clock Control */ +#define CCR_USC 0x50 /* Unified Software Clear */ +#define CCR_VRAMRTC 0x60 /* VRAM Timing Control */ + /* 0x61 VRAM Refresh Control */ +#define CCR_VRAMSAC 0x62 /* VRAM Access Control */ + /* 0x63 VRAM Status */ +#define CCR_VRAMBC 0x64 /* VRAM Block Control */ + +/* + * LCD Control Register + * + * This iomem area supports only 16-bit IO. + */ +#define LCR_UIS 0x000 /* Unified Interrupt Status */ +#define LCR_VHPN 0x008 /* VRAM Horizontal Pixel Number */ +#define LCR_CFSAL 0x00a /* Command FIFO Start Address Low */ +#define LCR_CFSAH 0x00c /* Command FIFO Start Address High */ +#define LCR_CFS 0x00e /* Command FIFO Size */ +#define LCR_CFWS 0x010 /* Command FIFO Writeable Size */ +#define LCR_BBIE 0x012 /* BitBLT Interrupt Enable */ +#define LCR_BBISC 0x014 /* BitBLT Interrupt Status and Clear */ +#define LCR_CCS 0x016 /* Command Count Status */ +#define LCR_BBES 0x018 /* BitBLT Execution Status */ +#define LCR_CMDL 0x01c /* Command Low */ +#define LCR_CMDH 0x01e /* Command High */ +#define LCR_CFC 0x022 /* Command FIFO Clear */ +#define LCR_CCIFC 0x024 /* CMOS Camera IF Control */ +#define LCR_HWT 0x026 /* Hardware Test */ +#define LCR_LCDCCRC 0x100 /* LCDC Clock and Reset Control */ +#define LCR_LCDCC 0x102 /* LCDC Control */ +#define LCR_LCDCOPC 0x104 /* LCDC Output Pin Control */ +#define LCR_LCDIS 0x108 /* LCD Interrupt Status */ +#define LCR_LCDIM 0x10a /* LCD Interrupt Mask */ +#define LCR_LCDIE 0x10c /* LCD Interrupt Enable */ +#define LCR_GDSAL 0x122 /* Graphics Display Start Address Low */ +#define LCR_GDSAH 0x124 /* Graphics Display Start Address High */ +#define LCR_VHPCL 0x12a /* VRAM Horizontal Pixel Count Low */ +#define LCR_VHPCH 0x12c /* VRAM Horizontal Pixel Count High */ +#define LCR_GM 0x12e /* Graphic Mode(VRAM access enable) */ +#define LCR_HT 0x140 /* Horizontal Total */ +#define LCR_HDS 0x142 /* Horizontal Display Start */ +#define LCR_HSS 0x144 /* H-Sync Start */ +#define LCR_HSE 0x146 /* H-Sync End */ +#define LCR_HNP 0x14c /* Horizontal Number of Pixels */ +#define LCR_VT 0x150 /* Vertical Total */ +#define LCR_VDS 0x152 /* Vertical Display Start */ +#define LCR_VSS 0x154 /* V-Sync Start */ +#define LCR_VSE 0x156 /* V-Sync End */ +#define LCR_CDLN 0x160 /* Current Display Line Number */ +#define LCR_ILN 0x162 /* Interrupt Line Number */ +#define LCR_SP 0x164 /* Sync Polarity */ +#define LCR_MISC 0x166 /* MISC(RGB565 mode) */ +#define LCR_VIHSS 0x16a /* Video Interface H-Sync Start */ +#define LCR_VIVS 0x16c /* Video Interface Vertical Start */ +#define LCR_VIVE 0x16e /* Video Interface Vertical End */ +#define LCR_VIVSS 0x170 /* Video Interface V-Sync Start */ +#define LCR_VCCIS 0x17e /* Video / CMOS Camera Interface Select */ +#define LCR_VIDWSAL 0x180 /* VI Data Write Start Address Low */ +#define LCR_VIDWSAH 0x182 /* VI Data Write Start Address High */ +#define LCR_VIDRSAL 0x184 /* VI Data Read Start Address Low */ +#define LCR_VIDRSAH 0x186 /* VI Data Read Start Address High */ +#define LCR_VIPDDST 0x188 /* VI Picture Data Display Start Timing */ +#define LCR_VIPDDET 0x186 /* VI Picture Data Display End Timing */ +#define LCR_VIE 0x18c /* Video Interface Enable */ +#define LCR_VCS 0x18e /* Video/Camera Select */ +#define LCR_VPHWC 0x194 /* Video Picture Horizontal Wait Count */ +#define LCR_VPHS 0x196 /* Video Picture Horizontal Size */ +#define LCR_VPVWC 0x198 /* Video Picture Vertical Wait Count */ +#define LCR_VPVS 0x19a /* Video Picture Vertical Size */ +#define LCR_PLHPIX 0x1a0 /* PLHPIX */ +#define LCR_XS 0x1a2 /* XStart */ +#define LCR_XCKHW 0x1a4 /* XCK High Width */ +#define LCR_STHS 0x1a8 /* STH Start */ +#define LCR_VT2 0x1aa /* Vertical Total */ +#define LCR_YCKSW 0x1ac /* YCK Start Wait */ +#define LCR_YSTS 0x1ae /* YST Start */ +#define LCR_PPOLS 0x1b0 /* #PPOL Start */ +#define LCR_PRECW 0x1b2 /* PREC Width */ +#define LCR_VCLKHW 0x1b4 /* VCLK High Width */ +#define LCR_OC 0x1b6 /* Output Control */ + +static char *mode_option __devinitdata; + +struct tmiofb_par { + u32 pseudo_palette[16]; + +#ifdef CONFIG_FB_TMIO_ACCELL + wait_queue_head_t wait_acc; + bool use_polling; +#endif + + void __iomem *ccr; + void __iomem *lcr; +}; + +/*--------------------------------------------------------------------------*/ + +/* + * reasons for an interrupt: + * uis bbisc lcdis + * 0100 0001 accelerator command completed + * 2000 0001 vsync start + * 2000 0002 display start + * 2000 0004 line number match(0x1ff mask???) + */ +static irqreturn_t tmiofb_irq(int irq, void *__info) +{ + struct fb_info *info = __info; + struct tmiofb_par *par = info->par; + unsigned int bbisc = tmio_ioread16(par->lcr + LCR_BBISC); + + + /* + * We were in polling mode and now we got correct irq. + * Switch back to IRQ-based sync of command FIFO + */ + if (unlikely(par->use_polling && irq != -1)) { + printk(KERN_INFO "tmiofb: switching to waitq\n"); + par->use_polling = false; + } + + tmio_iowrite16(bbisc, par->lcr + LCR_BBISC); + +#ifdef CONFIG_FB_TMIO_ACCELL + if (bbisc & 1) + wake_up(&par->wait_acc); +#endif + + return IRQ_HANDLED; +} + + +/*--------------------------------------------------------------------------*/ + + +/* + * Turns off the LCD controller and LCD host controller. + */ +static int tmiofb_hw_stop(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct tmio_fb_data *data = cell->driver_data; + struct fb_info *info = platform_get_drvdata(dev); + struct tmiofb_par *par = info->par; + + tmio_iowrite16(0, par->ccr + CCR_UGCC); + tmio_iowrite16(0, par->lcr + LCR_GM); + data->lcd_set_power(dev, 0); + tmio_iowrite16(0x0010, par->lcr + LCR_LCDCCRC); + + return 0; +} + +/* + * Initializes the LCD host controller. + */ +static int tmiofb_hw_init(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct fb_info *info = platform_get_drvdata(dev); + struct tmiofb_par *par = info->par; + const struct resource *nlcr = &cell->resources[0]; + const struct resource *vram = &cell->resources[2]; + unsigned long base; + + if (nlcr == NULL || vram == NULL) + return -EINVAL; + + base = nlcr->start; + + tmio_iowrite16(0x003a, par->ccr + CCR_UGCC); + tmio_iowrite16(0x003a, par->ccr + CCR_GCC); + tmio_iowrite16(0x3f00, par->ccr + CCR_USC); + + msleep(2); /* wait for device to settle */ + + tmio_iowrite16(0x0000, par->ccr + CCR_USC); + tmio_iowrite16(base >> 16, par->ccr + CCR_BASEH); + tmio_iowrite16(base, par->ccr + CCR_BASEL); + tmio_iowrite16(0x0002, par->ccr + CCR_CMD); /* base address enable */ + tmio_iowrite16(0x40a8, par->ccr + CCR_VRAMRTC); /* VRAMRC, VRAMTC */ + tmio_iowrite16(0x0018, par->ccr + CCR_VRAMSAC); /* VRAMSTS, VRAMAC */ + tmio_iowrite16(0x0002, par->ccr + CCR_VRAMBC); + msleep(2); /* wait for device to settle */ + tmio_iowrite16(0x000b, par->ccr + CCR_VRAMBC); + + base = vram->start + info->screen_size; + tmio_iowrite16(base >> 16, par->lcr + LCR_CFSAH); + tmio_iowrite16(base, par->lcr + LCR_CFSAL); + tmio_iowrite16(TMIOFB_FIFO_SIZE - 1, par->lcr + LCR_CFS); + tmio_iowrite16(1, par->lcr + LCR_CFC); + tmio_iowrite16(1, par->lcr + LCR_BBIE); + tmio_iowrite16(0, par->lcr + LCR_CFWS); + + return 0; +} + +/* + * Sets the LCD controller's output resolution and pixel clock + */ +static void tmiofb_hw_mode(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct tmio_fb_data *data = cell->driver_data; + struct fb_info *info = platform_get_drvdata(dev); + struct fb_videomode *mode = info->mode; + struct tmiofb_par *par = info->par; + unsigned int i; + + tmio_iowrite16(0, par->lcr + LCR_GM); + data->lcd_set_power(dev, 0); + tmio_iowrite16(0x0010, par->lcr + LCR_LCDCCRC); + data->lcd_mode(dev, mode); + data->lcd_set_power(dev, 1); + + tmio_iowrite16(info->fix.line_length, par->lcr + LCR_VHPN); + tmio_iowrite16(0, par->lcr + LCR_GDSAH); + tmio_iowrite16(0, par->lcr + LCR_GDSAL); + tmio_iowrite16(info->fix.line_length >> 16, par->lcr + LCR_VHPCH); + tmio_iowrite16(info->fix.line_length, par->lcr + LCR_VHPCL); + tmio_iowrite16(i = 0, par->lcr + LCR_HSS); + tmio_iowrite16(i += mode->hsync_len, par->lcr + LCR_HSE); + tmio_iowrite16(i += mode->left_margin, par->lcr + LCR_HDS); + tmio_iowrite16(i += mode->xres + mode->right_margin, par->lcr + LCR_HT); + tmio_iowrite16(mode->xres, par->lcr + LCR_HNP); + tmio_iowrite16(i = 0, par->lcr + LCR_VSS); + tmio_iowrite16(i += mode->vsync_len, par->lcr + LCR_VSE); + tmio_iowrite16(i += mode->upper_margin, par->lcr + LCR_VDS); + tmio_iowrite16(i += mode->yres, par->lcr + LCR_ILN); + tmio_iowrite16(i += mode->lower_margin, par->lcr + LCR_VT); + tmio_iowrite16(3, par->lcr + LCR_MISC); /* RGB565 mode */ + tmio_iowrite16(1, par->lcr + LCR_GM); /* VRAM enable */ + tmio_iowrite16(0x4007, par->lcr + LCR_LCDCC); + tmio_iowrite16(3, par->lcr + LCR_SP); /* sync polarity */ + + tmio_iowrite16(0x0010, par->lcr + LCR_LCDCCRC); + msleep(5); /* wait for device to settle */ + tmio_iowrite16(0x0014, par->lcr + LCR_LCDCCRC); /* STOP_CKP */ + msleep(5); /* wait for device to settle */ + tmio_iowrite16(0x0015, par->lcr + LCR_LCDCCRC); /* STOP_CKP|SOFT_RESET*/ + tmio_iowrite16(0xfffa, par->lcr + LCR_VCS); +} + +/*--------------------------------------------------------------------------*/ + +#ifdef CONFIG_FB_TMIO_ACCELL +static int __must_check +tmiofb_acc_wait(struct fb_info *info, unsigned int ccs) +{ + struct tmiofb_par *par = info->par; + /* + * This code can be called whith interrupts disabled. + * So instead of relaying on irq to trigger the event, + * poll the state till the necessary command is executed. + */ + if (irqs_disabled() || par->use_polling) { + int i = 0; + while (tmio_ioread16(par->lcr + LCR_CCS) > ccs) { + udelay(1); + i++; + if (i > 10000) { + pr_err("tmiofb: timeout waiting for %d\n", + ccs); + return -ETIMEDOUT; + } + tmiofb_irq(-1, info); + } + } else { + if (!wait_event_interruptible_timeout(par->wait_acc, + tmio_ioread16(par->lcr + LCR_CCS) <= ccs, + 1000)) { + pr_err("tmiofb: timeout waiting for %d\n", ccs); + return -ETIMEDOUT; + } + } + + return 0; +} + +/* + * Writes an accelerator command to the accelerator's FIFO. + */ +static int +tmiofb_acc_write(struct fb_info *info, const u32 *cmd, unsigned int count) +{ + struct tmiofb_par *par = info->par; + int ret; + + ret = tmiofb_acc_wait(info, TMIOFB_FIFO_SIZE - count); + if (ret) + return ret; + + for (; count; count--, cmd++) { + tmio_iowrite16(*cmd >> 16, par->lcr + LCR_CMDH); + tmio_iowrite16(*cmd, par->lcr + LCR_CMDL); + } + + return ret; +} + +/* + * Wait for the accelerator to finish its operations before writing + * to the framebuffer for consistent display output. + */ +static int tmiofb_sync(struct fb_info *fbi) +{ + struct tmiofb_par *par = fbi->par; + + int ret; + int i = 0; + + ret = tmiofb_acc_wait(fbi, 0); + + while (tmio_ioread16(par->lcr + LCR_BBES) & 2) { /* blit active */ + udelay(1); + i++ ; + if (i > 10000) { + printk(KERN_ERR "timeout waiting for blit to end!\n"); + return -ETIMEDOUT; + } + } + + return ret; +} + +static void +tmiofb_fillrect(struct fb_info *fbi, const struct fb_fillrect *rect) +{ + const u32 cmd[] = { + TMIOFB_ACC_DSADR((rect->dy * fbi->mode->xres + rect->dx) * 2), + TMIOFB_ACC_DHPIX(rect->width - 1), + TMIOFB_ACC_DVPIX(rect->height - 1), + TMIOFB_ACC_FILL(rect->color), + TMIOFB_ACC_FLGO, + }; + + if (fbi->state != FBINFO_STATE_RUNNING || + fbi->flags & FBINFO_HWACCEL_DISABLED) { + cfb_fillrect(fbi, rect); + return; + } + + tmiofb_acc_write(fbi, cmd, ARRAY_SIZE(cmd)); +} + +static void +tmiofb_copyarea(struct fb_info *fbi, const struct fb_copyarea *area) +{ + const u32 cmd[] = { + TMIOFB_ACC_DSADR((area->dy * fbi->mode->xres + area->dx) * 2), + TMIOFB_ACC_DHPIX(area->width - 1), + TMIOFB_ACC_DVPIX(area->height - 1), + TMIOFB_ACC_SSADR((area->sy * fbi->mode->xres + area->sx) * 2), + TMIOFB_ACC_SCGO, + }; + + if (fbi->state != FBINFO_STATE_RUNNING || + fbi->flags & FBINFO_HWACCEL_DISABLED) { + cfb_copyarea(fbi, area); + return; + } + + tmiofb_acc_write(fbi, cmd, ARRAY_SIZE(cmd)); +} +#endif + +static void tmiofb_clearscreen(struct fb_info *info) +{ + const struct fb_fillrect rect = { + .dx = 0, + .dy = 0, + .width = info->mode->xres, + .height = info->mode->yres, + .color = 0, + .rop = ROP_COPY, + }; + + info->fbops->fb_fillrect(info, &rect); +} + +static int tmiofb_vblank(struct fb_info *fbi, struct fb_vblank *vblank) +{ + struct tmiofb_par *par = fbi->par; + struct fb_videomode *mode = fbi->mode; + unsigned int vcount = tmio_ioread16(par->lcr + LCR_CDLN); + unsigned int vds = mode->vsync_len + mode->upper_margin; + + vblank->vcount = vcount; + vblank->flags = FB_VBLANK_HAVE_VBLANK | FB_VBLANK_HAVE_VCOUNT + | FB_VBLANK_HAVE_VSYNC; + + if (vcount < mode->vsync_len) + vblank->flags |= FB_VBLANK_VSYNCING; + + if (vcount < vds || vcount > vds + mode->yres) + vblank->flags |= FB_VBLANK_VBLANKING; + + return 0; +} + + +static int tmiofb_ioctl(struct fb_info *fbi, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case FBIOGET_VBLANK: { + struct fb_vblank vblank = {0}; + void __user *argp = (void __user *) arg; + + tmiofb_vblank(fbi, &vblank); + if (copy_to_user(argp, &vblank, sizeof vblank)) + return -EFAULT; + return 0; + } + +#ifdef CONFIG_FB_TMIO_ACCELL + case FBIO_TMIO_ACC_SYNC: + tmiofb_sync(fbi); + return 0; + + case FBIO_TMIO_ACC_WRITE: { + u32 __user *argp = (void __user *) arg; + u32 len; + u32 acc[16]; + + if (get_user(len, argp)) + return -EFAULT; + if (len > ARRAY_SIZE(acc)) + return -EINVAL; + if (copy_from_user(acc, argp + 1, sizeof(u32) * len)) + return -EFAULT; + + return tmiofb_acc_write(fbi, acc, len); + } +#endif + } + + return -ENOTTY; +} + +/*--------------------------------------------------------------------------*/ + +/* Select the smallest mode that allows the desired resolution to be + * displayed. If desired, the x and y parameters can be rounded up to + * match the selected mode. + */ +static struct fb_videomode * +tmiofb_find_mode(struct fb_info *info, struct fb_var_screeninfo *var) +{ + struct mfd_cell *cell = + info->device->platform_data; + struct tmio_fb_data *data = cell->driver_data; + struct fb_videomode *best = NULL; + int i; + + for (i = 0; i < data->num_modes; i++) { + struct fb_videomode *mode = data->modes + i; + + if (mode->xres >= var->xres && mode->yres >= var->yres + && (!best || (mode->xres < best->xres + && mode->yres < best->yres))) + best = mode; + } + + return best; +} + +static int tmiofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + + struct fb_videomode *mode; + struct mfd_cell *cell = + info->device->platform_data; + struct tmio_fb_data *data = cell->driver_data; + + mode = tmiofb_find_mode(info, var); + if (!mode || var->bits_per_pixel > 16) + return -EINVAL; + + fb_videomode_to_var(var, mode); + + var->xres_virtual = mode->xres; + var->yres_virtual = info->screen_size / (mode->xres * 2); + + if (var->yres_virtual < var->yres) + return -EINVAL; + + var->xoffset = 0; + var->yoffset = 0; + var->bits_per_pixel = 16; + var->grayscale = 0; + var->red.offset = 11; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 6; + var->blue.offset = 0; + var->blue.length = 5; + var->transp.offset = 0; + var->transp.length = 0; + var->nonstd = 0; + var->height = data->height; /* mm */ + var->width = data->width; /* mm */ + var->rotate = 0; + return 0; +} + +static int tmiofb_set_par(struct fb_info *info) +{ + struct fb_var_screeninfo *var = &info->var; + struct fb_videomode *mode; + + mode = tmiofb_find_mode(info, var); + if (!mode) + return -EINVAL; + + info->mode = mode; + info->fix.line_length = info->mode->xres * + var->bits_per_pixel / 8; + + tmiofb_hw_mode(to_platform_device(info->device)); + tmiofb_clearscreen(info); + return 0; +} + +static int tmiofb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + struct tmiofb_par *par = info->par; + + if (regno < ARRAY_SIZE(par->pseudo_palette)) { + par->pseudo_palette[regno] = + ((red & 0xf800)) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + return 0; + } + + return -EINVAL; +} + +static int tmiofb_blank(int blank, struct fb_info *info) +{ + /* + * everything is done in lcd/bl drivers. + * this is purely to make sysfs happy and work. + */ + return 0; +} + +static struct fb_ops tmiofb_ops = { + .owner = THIS_MODULE, + + .fb_ioctl = tmiofb_ioctl, + .fb_check_var = tmiofb_check_var, + .fb_set_par = tmiofb_set_par, + .fb_setcolreg = tmiofb_setcolreg, + .fb_blank = tmiofb_blank, + .fb_imageblit = cfb_imageblit, +#ifdef CONFIG_FB_TMIO_ACCELL + .fb_sync = tmiofb_sync, + .fb_fillrect = tmiofb_fillrect, + .fb_copyarea = tmiofb_copyarea, +#else + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, +#endif +}; + +/*--------------------------------------------------------------------------*/ + +static int __devinit tmiofb_probe(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct tmio_fb_data *data = cell->driver_data; + struct resource *ccr = platform_get_resource(dev, IORESOURCE_MEM, 1); + struct resource *lcr = platform_get_resource(dev, IORESOURCE_MEM, 0); + struct resource *vram = platform_get_resource(dev, IORESOURCE_MEM, 2); + int irq = platform_get_irq(dev, 0); + struct fb_info *info; + struct tmiofb_par *par; + int retval; + + /* + * This is the only way ATM to disable the fb + */ + if (data == NULL) { + dev_err(&dev->dev, "NULL platform data!\n"); + return -EINVAL; + } + + info = framebuffer_alloc(sizeof(struct tmiofb_par), &dev->dev); + + if (!info) + return -ENOMEM; + + par = info->par; + +#ifdef CONFIG_FB_TMIO_ACCELL + init_waitqueue_head(&par->wait_acc); + + par->use_polling = true; + + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA + | FBINFO_HWACCEL_FILLRECT; +#else + info->flags = FBINFO_DEFAULT; +#endif + + info->fbops = &tmiofb_ops; + + strcpy(info->fix.id, "tmio-fb"); + info->fix.smem_start = vram->start; + info->fix.smem_len = resource_size(vram); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.mmio_start = lcr->start; + info->fix.mmio_len = resource_size(lcr); + info->fix.accel = FB_ACCEL_NONE; + info->screen_size = info->fix.smem_len - (4 * TMIOFB_FIFO_SIZE); + info->pseudo_palette = par->pseudo_palette; + + par->ccr = ioremap(ccr->start, resource_size(ccr)); + if (!par->ccr) { + retval = -ENOMEM; + goto err_ioremap_ccr; + } + + par->lcr = ioremap(info->fix.mmio_start, info->fix.mmio_len); + if (!par->lcr) { + retval = -ENOMEM; + goto err_ioremap_lcr; + } + + info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); + if (!info->screen_base) { + retval = -ENOMEM; + goto err_ioremap_vram; + } + + retval = request_irq(irq, &tmiofb_irq, IRQF_DISABLED, + dev->dev.bus_id, info); + + if (retval) + goto err_request_irq; + + platform_set_drvdata(dev, info); + + retval = fb_find_mode(&info->var, info, mode_option, + data->modes, data->num_modes, + data->modes, 16); + if (!retval) { + retval = -EINVAL; + goto err_find_mode; + } + + if (cell->enable) { + retval = cell->enable(dev); + if (retval) + goto err_enable; + } + + retval = tmiofb_hw_init(dev); + if (retval) + goto err_hw_init; + + fb_videomode_to_modelist(data->modes, data->num_modes, + &info->modelist); + + retval = register_framebuffer(info); + if (retval < 0) + goto err_register_framebuffer; + + printk(KERN_INFO "fb%d: %s frame buffer device\n", + info->node, info->fix.id); + + return 0; + +err_register_framebuffer: +/*err_set_par:*/ + tmiofb_hw_stop(dev); +err_hw_init: + if (cell->disable) + cell->disable(dev); +err_enable: +err_find_mode: + platform_set_drvdata(dev, NULL); + free_irq(irq, info); +err_request_irq: + iounmap(info->screen_base); +err_ioremap_vram: + iounmap(par->lcr); +err_ioremap_lcr: + iounmap(par->ccr); +err_ioremap_ccr: + framebuffer_release(info); + return retval; +} + +static int __devexit tmiofb_remove(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct fb_info *info = platform_get_drvdata(dev); + int irq = platform_get_irq(dev, 0); + struct tmiofb_par *par; + + if (info) { + par = info->par; + unregister_framebuffer(info); + + tmiofb_hw_stop(dev); + + if (cell->disable) + cell->disable(dev); + + platform_set_drvdata(dev, NULL); + + free_irq(irq, info); + + iounmap(info->screen_base); + iounmap(par->lcr); + iounmap(par->ccr); + + framebuffer_release(info); + } + + return 0; +} + +#ifdef DEBUG +static void tmiofb_dump_regs(struct platform_device *dev) +{ + struct fb_info *info = platform_get_drvdata(dev); + struct tmiofb_par *par = info->par; + + printk(KERN_DEBUG "lhccr:\n"); +#define CCR_PR(n) printk(KERN_DEBUG "\t" #n " = \t%04x\n",\ + tmio_ioread16(par->ccr + CCR_ ## n)); + CCR_PR(CMD); + CCR_PR(REVID); + CCR_PR(BASEL); + CCR_PR(BASEH); + CCR_PR(UGCC); + CCR_PR(GCC); + CCR_PR(USC); + CCR_PR(VRAMRTC); + CCR_PR(VRAMSAC); + CCR_PR(VRAMBC); +#undef CCR_PR + + printk(KERN_DEBUG "lcr: \n"); +#define LCR_PR(n) printk(KERN_DEBUG "\t" #n " = \t%04x\n",\ + tmio_ioread16(par->lcr + LCR_ ## n)); + LCR_PR(UIS); + LCR_PR(VHPN); + LCR_PR(CFSAL); + LCR_PR(CFSAH); + LCR_PR(CFS); + LCR_PR(CFWS); + LCR_PR(BBIE); + LCR_PR(BBISC); + LCR_PR(CCS); + LCR_PR(BBES); + LCR_PR(CMDL); + LCR_PR(CMDH); + LCR_PR(CFC); + LCR_PR(CCIFC); + LCR_PR(HWT); + LCR_PR(LCDCCRC); + LCR_PR(LCDCC); + LCR_PR(LCDCOPC); + LCR_PR(LCDIS); + LCR_PR(LCDIM); + LCR_PR(LCDIE); + LCR_PR(GDSAL); + LCR_PR(GDSAH); + LCR_PR(VHPCL); + LCR_PR(VHPCH); + LCR_PR(GM); + LCR_PR(HT); + LCR_PR(HDS); + LCR_PR(HSS); + LCR_PR(HSE); + LCR_PR(HNP); + LCR_PR(VT); + LCR_PR(VDS); + LCR_PR(VSS); + LCR_PR(VSE); + LCR_PR(CDLN); + LCR_PR(ILN); + LCR_PR(SP); + LCR_PR(MISC); + LCR_PR(VIHSS); + LCR_PR(VIVS); + LCR_PR(VIVE); + LCR_PR(VIVSS); + LCR_PR(VCCIS); + LCR_PR(VIDWSAL); + LCR_PR(VIDWSAH); + LCR_PR(VIDRSAL); + LCR_PR(VIDRSAH); + LCR_PR(VIPDDST); + LCR_PR(VIPDDET); + LCR_PR(VIE); + LCR_PR(VCS); + LCR_PR(VPHWC); + LCR_PR(VPHS); + LCR_PR(VPVWC); + LCR_PR(VPVS); + LCR_PR(PLHPIX); + LCR_PR(XS); + LCR_PR(XCKHW); + LCR_PR(STHS); + LCR_PR(VT2); + LCR_PR(YCKSW); + LCR_PR(YSTS); + LCR_PR(PPOLS); + LCR_PR(PRECW); + LCR_PR(VCLKHW); + LCR_PR(OC); +#undef LCR_PR +} +#endif + +#ifdef CONFIG_PM +static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) +{ + struct fb_info *info = platform_get_drvdata(dev); + struct tmiofb_par *par = info->par; + struct mfd_cell *cell = dev->dev.platform_data; + int retval = 0; + + acquire_console_sem(); + + fb_set_suspend(info, 1); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + + /* + * The fb should be usable even if interrupts are disabled (and they are + * during suspend/resume). Switch temporary to forced polling. + */ + printk(KERN_INFO "tmiofb: switching to polling\n"); + par->use_polling = true; + tmiofb_hw_stop(dev); + + if (cell->suspend) + retval = cell->suspend(dev); + + release_console_sem(); + + return retval; +} + +static int tmiofb_resume(struct platform_device *dev) +{ + struct fb_info *info = platform_get_drvdata(dev); + struct mfd_cell *cell = dev->dev.platform_data; + int retval; + + acquire_console_sem(); + + if (cell->resume) { + retval = cell->resume(dev); + if (retval) + goto out; + } + + tmiofb_irq(-1, info); + + tmiofb_hw_init(dev); + + tmiofb_hw_mode(dev); + + fb_set_suspend(info, 0); +out: + release_console_sem(); + return retval; +} +#else +#define tmiofb_suspend NULL +#define tmiofb_resume NULL +#endif + +static struct platform_driver tmiofb_driver = { + .driver.name = "tmio-fb", + .driver.owner = THIS_MODULE, + .probe = tmiofb_probe, + .remove = __devexit_p(tmiofb_remove), + .suspend = tmiofb_suspend, + .resume = tmiofb_resume, +}; + +/*--------------------------------------------------------------------------*/ + +#ifndef MODULE +static void __init tmiofb_setup(char *options) +{ + char *this_opt; + + if (!options || !*options) + return; + + while ((this_opt = strsep(&options, ",")) != NULL) { + if (!*this_opt) + continue; + /* + * FIXME + */ + } +} +#endif + +static int __init tmiofb_init(void) +{ +#ifndef MODULE + char *option = NULL; + + if (fb_get_options("tmiofb", &option)) + return -ENODEV; + tmiofb_setup(option); +#endif + return platform_driver_register(&tmiofb_driver); +} + +static void __exit tmiofb_cleanup(void) +{ + platform_driver_unregister(&tmiofb_driver); +} + +module_init(tmiofb_init); +module_exit(tmiofb_cleanup); + +MODULE_DESCRIPTION("TMIO framebuffer driver"); +MODULE_AUTHOR("Chris Humbert, Dirk Opfer, Dmitry Baryshkov"); +MODULE_LICENSE("GPL"); diff -puN include/linux/mfd/tmio.h~fbdev-add-new-tmio-framebuffer-driver include/linux/mfd/tmio.h --- a/include/linux/mfd/tmio.h~fbdev-add-new-tmio-framebuffer-driver +++ a/include/linux/mfd/tmio.h @@ -1,6 +1,8 @@ #ifndef MFD_TMIO_H #define MFD_TMIO_H +#include <linux/fb.h> + #define tmio_ioread8(addr) readb(addr) #define tmio_ioread16(addr) readw(addr) #define tmio_ioread16_rep(r, b, l) readsw(r, b, l) @@ -25,4 +27,21 @@ struct tmio_nand_data { unsigned int num_partitions; }; +#define FBIO_TMIO_ACC_WRITE 0x7C639300 +#define FBIO_TMIO_ACC_SYNC 0x7C639301 + +struct tmio_fb_data { + int (*lcd_set_power)(struct platform_device *fb_dev, + bool on); + int (*lcd_mode)(struct platform_device *fb_dev, + const struct fb_videomode *mode); + int num_modes; + struct fb_videomode *modes; + + /* in mm: size of screen */ + int height; + int width; +}; + + #endif _ Patches currently in -mm which might be from dbaryshkov@xxxxxxxxx are origin.patch add-new-framebuffer-driver-for-fujitsu-mb862xx-gdcs.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html