The patch titled Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10 has been removed from the -mm tree. Its filename was blackfin-nfc-driver-fix-bug-hw-ecc-calc-by-making-sure-we-extract-11-bits-from-each-register-instead-of-10.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10 From: Mike Frysinger <vapier.adi@xxxxxxxxx> Signed-off-by: Mike Frysinger <vapier.adi@xxxxxxxxx> Signed-off-by: Bryan Wu <cooloney@xxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/mtd/nand/bf5xx_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff -puN drivers/mtd/nand/bf5xx_nand.c~blackfin-nfc-driver-fix-bug-hw-ecc-calc-by-making-sure-we-extract-11-bits-from-each-register-instead-of-10 drivers/mtd/nand/bf5xx_nand.c --- a/drivers/mtd/nand/bf5xx_nand.c~blackfin-nfc-driver-fix-bug-hw-ecc-calc-by-making-sure-we-extract-11-bits-from-each-register-instead-of-10 +++ a/drivers/mtd/nand/bf5xx_nand.c @@ -298,7 +298,7 @@ static int bf5xx_nand_calculate_ecc(stru ecc0 = bfin_read_NFC_ECC0(); ecc1 = bfin_read_NFC_ECC1(); - code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); @@ -310,7 +310,7 @@ static int bf5xx_nand_calculate_ecc(stru if (page_size == 512) { ecc0 = bfin_read_NFC_ECC2(); ecc1 = bfin_read_NFC_ECC3(); - code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); /* second 3 bytes in ecc_code for second 256 * bytes of 512 page size _ Patches currently in -mm which might be from vapier.adi@xxxxxxxxx are origin.patch blackfin-rtc-driver-add-support-for-power-management-framework.patch blackfin-rtc-driver-dont-bother-passing-the-rtc-struct-down-to-bfin_rtc_int_setclear-since-it-isnt-needed-shaves-off-100bytes.patch blackfin-rtc-driver-disable-the-write-complete-irq-upon-close.patch blackfin-rtc-driver-wait-for-the-write-complete-interrupt-complete-before-sleeping.patch blackfin-rtc-driver-convert-pie-handling-to-irq_set_state-as-pointed-out-by-david-brownell.patch blackfin-rtc-driver-drop-pie-stopwatch-code-since-the-hardware-can-only-do-a-max-of-1hz-and-this-same-functionality-is-provided-by-uie.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html