The patch titled
w1: Document add, remove, search_count, and pullup.
has been removed from the -mm tree. Its filename was
w1-document-add-remove-search_count-and-pullup.patch
This patch was dropped because an updated version will be merged
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: w1: Document add, remove, search_count, and pullup.
From: David Fries <david@xxxxxxxxx>
Document w1_master_add, w1_master_remove, search_count, and pullup.
Signed-off-by: David Fries <david@xxxxxxxxx>
Signed-off-by: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/w1/w1.generic | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff -puN Documentation/w1/w1.generic~w1-document-add-remove-search_count-and-pullup Documentation/w1/w1.generic
--- a/Documentation/w1/w1.generic~w1-document-add-remove-search_count-and-pullup
+++ a/Documentation/w1/w1.generic
@@ -79,10 +79,13 @@ w1 master sysfs interface
<xx-xxxxxxxxxxxxx> - a directory for a found device. The format is family-serial
bus - (standard) symlink to the w1 bus
driver - (standard) symlink to the w1 driver
+w1_master_add - Manually register a slave device
w1_master_attempts - the number of times a search was attempted
w1_master_max_slave_count
- the maximum slaves that may be attached to a master
w1_master_name - the name of the device (w1_bus_masterX)
+w1_master_pullup - 5V strong pullup 0 enabled, 1 disabled
+w1_master_remove - Manually remove a slave device
w1_master_search - the number of searches left to do, -1=continual (default)
w1_master_slave_count
- the number of slaves found
@@ -90,7 +93,13 @@ w1_master_slaves - the names of the sl
w1_master_timeout - the delay in seconds between searches
If you have a w1 bus that never changes (you don't add or remove devices),
-you can set w1_master_search to a positive value to disable searches.
+you can set the module parameter search_count to a small positive number
+for an initially small number of bus searches. Alternatively it could be
+set to zero, then manually add the slave device serial numbers by
+w1_master_add device file. The w1_master_add and w1_master_remove files
+generally only make sense when searching is disabled, as a search will
+redetect manually removed devices that are present and timeout manually
+added devices that aren't on the bus.
w1 slave sysfs interface
_
Patches currently in -mm which might be from david@xxxxxxxxx are
w1-document-add-remove-search_count-and-pullup.patch
w1-w1_slave_read_id-read-bug-use-device_attribute.patch
w1-w1_therm-fix-user-buffer-overflow-and-cat.patch
w1-w1_family-remove-unused-variable-need_exit.patch
w1-w1_therm-consistent-mutex-access-code-cleanup.patch
w1-w1_intc-use-first-available-master-number.patch
w1-w1c-s-printk-dev_dbg.patch
w1-w1_ioc-reset-comments-and-msleep.patch
w1-ds1wmc-msleep-for-reset.patch
w1-ds2490c-correct-print-message.patch
w1-ds2490c-add-support-for-strong-pullup.patch
w1-ds2490c-add-support-for-strong-pullup-checkpatch-fixes.patch
w1-ds2490c-ds_write_bit-grouping-error-disable-readback.patch
w1-ds2490c-disable-bit-read-and-write.patch
w1-ds2490c-simplify-and-fix-ds_touch_bit.patch
w1-ds2490c-ds_dump_status-rework.patch
w1-ds2490c-ds_reset-remove-ds_wait_status.patch
w1-ds2490c-reset-ds2490-in-init.patch
w1-ds2490c-magic-number-work.patch
w1-ds2490c-ds_write_block-remove-extra-ds_wait_status.patch
w1-documentation-w1-masters-ds2490-update.patch
w1-ds2490c-optimize-ds_set_pullup.patch
w1-ds2490c-optimize-ds_set_pullup-checkpatch-fixes.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
