The patch titled
w1: ds2490.c correct print message
has been added to the -mm tree. Its filename is
w1-ds2490c-correct-print-message.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: w1: ds2490.c correct print message
From: David Fries <david@xxxxxxxxx>
Corrected print message, it was writing not reading, this also prints the
endpoint used for the write instead of hardcoding it.
Failed to write 1-wire data to ep0x%x: err=3D%d.
Signed-off-by: David Fries <david@xxxxxxxxx>
Signed-off-by: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/w1/masters/ds2490.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff -puN drivers/w1/masters/ds2490.c~w1-ds2490c-correct-print-message drivers/w1/masters/ds2490.c
--- a/drivers/w1/masters/ds2490.c~w1-ds2490c-correct-print-message
+++ a/drivers/w1/masters/ds2490.c
@@ -341,7 +341,8 @@ static int ds_send_data(struct ds_device
count = 0;
err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000);
if (err < 0) {
- printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err);
+ printk(KERN_ERR "Failed to write 1-wire data to ep0x%x: "
+ "err=%d.\n", dev->ep[EP_DATA_OUT], err);
return err;
}
_
Patches currently in -mm which might be from david@xxxxxxxxx are
w1-fix-deadlocks-and-remove-w1_control_thread.patch
w1-abort-search-early-on-on-exit.patch
w1-dont-delay-search-start.patch
w1-w1_process-block-or-sleep.patch
w1-feature-enable-hardware-strong-pullup.patch
w1-feature-w1_thermc-use-strong-pullup-and-documentation.patch
w1-be-able-to-manually-add-and-remove-slaves.patch
w1-recode-w1_slave_found-logic.patch
w1-new-module-parameter-search_count.patch
w1-document-add-remove-search_count-and-pullup.patch
w1-w1_slave_read_id-read-bug-use-device_attribute.patch
w1-w1_therm-fix-user-buffer-overflow-and-cat.patch
w1-w1_family-remove-unused-variable-need_exit.patch
w1-w1_therm-consistent-mutex-access-code-cleanup.patch
w1-w1_intc-use-first-available-master-number.patch
w1-w1c-s-printk-dev_dbg.patch
w1-w1_ioc-reset-comments-and-msleep.patch
w1-ds1wmc-msleep-for-reset.patch
w1-ds2490c-correct-print-message.patch
w1-ds2490c-add-support-for-strong-pullup.patch
w1-ds2490c-ds_write_bit-grouping-error-disable-readback.patch
w1-ds2490c-disable-bit-read-and-write.patch
w1-ds2490c-simplify-and-fix-ds_touch_bit.patch
w1-ds2490c-ds_dump_status-rework.patch
w1-ds2490c-ds_reset-remove-ds_wait_status.patch
w1-ds2490c-reset-ds2490-in-init.patch
w1-ds2490c-magic-number-work.patch
w1-ds2490c-ds_write_block-remove-extra-ds_wait_status.patch
w1-documentation-w1-masters-ds2490-update.patch
w1-ds2490c-optimize-ds_set_pullup.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
