The patch titled m68k: gs: use tty_port fixes has been removed from the -mm tree. Its filename was m68k-gs-use-tty_port-fixes.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: m68k: gs: use tty_port fixes From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> commit b5391e29f428d11755ca2c91074c6db6f5c69d7c (gs: use tty_port) forgot to update the m68k gs serial drivers. Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/char/ser_a2232.c | 52 ++++++++++++++++---------------- drivers/char/vme_scc.c | 59 ++++++++++++++++++------------------- 2 files changed, 56 insertions(+), 55 deletions(-) diff -puN drivers/char/ser_a2232.c~m68k-gs-use-tty_port-fixes drivers/char/ser_a2232.c --- a/drivers/char/ser_a2232.c~m68k-gs-use-tty_port-fixes +++ a/drivers/char/ser_a2232.c @@ -192,7 +192,7 @@ static inline void a2232_receive_char(st Maybe one could implement a more efficient version by not only transferring one character at a time. */ - struct tty_struct *tty = port->gs.tty; + struct tty_struct *tty = port->gs.port.tty; #if 0 switch(err) { @@ -226,7 +226,7 @@ static void a2232_disable_tx_interrupts( /* Does this here really have to be? */ local_irq_save(flags); - port->gs.flags &= ~GS_TX_INTEN; + port->gs.port.flags &= ~GS_TX_INTEN; local_irq_restore(flags); } @@ -242,7 +242,7 @@ static void a2232_enable_tx_interrupts(v /* Does this here really have to be? */ local_irq_save(flags); - port->gs.flags |= GS_TX_INTEN; + port->gs.port.flags |= GS_TX_INTEN; local_irq_restore(flags); } @@ -276,9 +276,9 @@ static void a2232_shutdown_port(void *pt local_irq_save(flags); - port->gs.flags &= ~GS_ACTIVE; + port->gs.port.flags &= ~GS_ACTIVE; - if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) { + if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { /* Set DTR and RTS to Low, flush output. The NetBSD driver "msc.c" does it this way. */ stat->Command = ( (stat->Command & ~A2232CMD_CMask) | @@ -309,7 +309,7 @@ static int a2232_set_real_termios(void volatile struct a2232status *status; volatile struct a2232memory *mem; - if (!port->gs.tty || !port->gs.tty->termios) return 0; + if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; status = a2232stat(port->which_a2232, port->which_port_on_a2232); mem = a2232mem(port->which_a2232); @@ -345,7 +345,7 @@ static int a2232_set_real_termios(void } a2232_param |= rate; - cflag = port->gs.tty->termios->c_cflag; + cflag = port->gs.port.tty->termios->c_cflag; // get character size chsize = cflag & CSIZE; @@ -382,7 +382,7 @@ static int a2232_set_real_termios(void the conventional way of inserting START/STOP characters by hand in throttle()/unthrottle(). */ - softflow = !!( port->gs.tty->termios->c_iflag & IXOFF ); + softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF ); // get Parity (Enabled/Disabled? If Enabled, Odd or Even?) parity = cflag & (PARENB | PARODD); @@ -400,9 +400,9 @@ static int a2232_set_real_termios(void /* Hmm. Maybe an own a2232_port structure member would be cleaner? */ if (cflag & CLOCAL) - port->gs.flags &= ~ASYNC_CHECK_CD; + port->gs.port.flags &= ~ASYNC_CHECK_CD; else - port->gs.flags |= ASYNC_CHECK_CD; + port->gs.port.flags |= ASYNC_CHECK_CD; /* Now we have all parameters and can go to set them: */ @@ -482,18 +482,18 @@ static int a2232_open(struct tty_struct port = &a2232_ports[line]; tty->driver_data = port; - port->gs.tty = tty; - port->gs.count++; + port->gs.port.tty = tty; + port->gs.port.count++; retval = gs_init_port(&port->gs); if (retval) { - port->gs.count--; + port->gs.port.count--; return retval; } - port->gs.flags |= GS_ACTIVE; + port->gs.port.flags |= GS_ACTIVE; retval = gs_block_til_ready(port, filp); if (retval) { - port->gs.count--; + port->gs.port.count--; return retval; } @@ -522,7 +522,7 @@ int ch, err, n, p; for (p = 0; p < NUMLINES; p++){ /* for every port on this board */ err = 0; port = &a2232_ports[n*NUMLINES+p]; - if ( port->gs.flags & GS_ACTIVE ){ /* if the port is used */ + if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */ status = a2232stat(n,p); @@ -577,8 +577,8 @@ int ch, err, n, p; obuf = mem->OutBuf[p]; bufpos = status->OutHead; while ( (port->gs.xmit_cnt > 0) && - (!port->gs.tty->stopped) && - (!port->gs.tty->hw_stopped) ){ /* While there are chars to transmit */ + (!port->gs.port.tty->stopped) && + (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */ if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */ ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */ port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */ @@ -592,8 +592,8 @@ int ch, err, n, p; status->OutHead = bufpos; /* WakeUp if output buffer runs low */ - if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) { - tty_wakeup(port->gs.tty); + if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { + tty_wakeup(port->gs.port.tty); } } // if the port is used } // for every port on the board @@ -613,16 +613,16 @@ int ch, err, n, p; struct a2232_port *port = &a2232_ports[n*7+p]; port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */ - if (!(port->gs.flags & ASYNC_CHECK_CD)) + if (!(port->gs.port.flags & ASYNC_CHECK_CD)) ; /* Don't report DCD changes */ else if (port->cd_status) { // if DCD on: DCD went UP! /* Are we blocking in open?*/ - wake_up_interruptible(&port->gs.open_wait); + wake_up_interruptible(&port->gs.port.open_wait); } else { // if DCD off: DCD went DOWN! - if (port->gs.tty) - tty_hangup (port->gs.tty); + if (port->gs.port.tty) + tty_hangup (port->gs.port.tty); } } // if CD changed for this port @@ -655,8 +655,8 @@ static void a2232_init_portstructs(void) #ifdef NEW_WRITE_LOCKING mutex_init(&(port->gs.port_write_mutex)); #endif - init_waitqueue_head(&port->gs.open_wait); - init_waitqueue_head(&port->gs.close_wait); + init_waitqueue_head(&port->gs.port.open_wait); + init_waitqueue_head(&port->gs.port.close_wait); } } diff -puN drivers/char/vme_scc.c~m68k-gs-use-tty_port-fixes drivers/char/vme_scc.c --- a/drivers/char/vme_scc.c~m68k-gs-use-tty_port-fixes +++ a/drivers/char/vme_scc.c @@ -183,8 +183,8 @@ static void scc_init_portstructs(void) #ifdef NEW_WRITE_LOCKING port->gs.port_write_mutex = MUTEX; #endif - init_waitqueue_head(&port->gs.open_wait); - init_waitqueue_head(&port->gs.close_wait); + init_waitqueue_head(&port->gs.port.open_wait); + init_waitqueue_head(&port->gs.port.close_wait); } } @@ -422,7 +422,7 @@ static irqreturn_t scc_rx_int(int irq, v { unsigned char ch; struct scc_port *port = data; - struct tty_struct *tty = port->gs.tty; + struct tty_struct *tty = port->gs.port.tty; SCC_ACCESS_INIT(port); ch = SCCread_NB(RX_DATA_REG); @@ -453,7 +453,7 @@ static irqreturn_t scc_rx_int(int irq, v static irqreturn_t scc_spcond_int(int irq, void *data) { struct scc_port *port = data; - struct tty_struct *tty = port->gs.tty; + struct tty_struct *tty = port->gs.port.tty; unsigned char stat, ch, err; int int_pending_mask = port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX; @@ -500,7 +500,7 @@ static irqreturn_t scc_tx_int(int irq, v struct scc_port *port = data; SCC_ACCESS_INIT(port); - if (!port->gs.tty) { + if (!port->gs.port.tty) { printk(KERN_WARNING "scc_tx_int with NULL tty!\n"); SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); @@ -512,8 +512,9 @@ static irqreturn_t scc_tx_int(int irq, v SCCwrite(TX_DATA_REG, port->x_char); port->x_char = 0; } - else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped || - port->gs.tty->hw_stopped) + else if ((port->gs.xmit_cnt <= 0) || + port->gs.port.tty->stopped || + port->gs.port.tty->hw_stopped) break; else { SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]); @@ -522,15 +523,15 @@ static irqreturn_t scc_tx_int(int irq, v break; } } - if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped || - port->gs.tty->hw_stopped) { + if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped || + port->gs.port.tty->hw_stopped) { /* disable tx interrupts */ SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */ - port->gs.flags &= ~GS_TX_INTEN; + port->gs.port.flags &= ~GS_TX_INTEN; } - if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) - tty_wakeup(port->gs.tty); + if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) + tty_wakeup(port->gs.port.tty); SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); return IRQ_HANDLED; @@ -550,14 +551,14 @@ static irqreturn_t scc_stat_int(int irq, if (changed & SR_DCD) { port->c_dcd = !!(sr & SR_DCD); - if (!(port->gs.flags & ASYNC_CHECK_CD)) + if (!(port->gs.port.flags & ASYNC_CHECK_CD)) ; /* Don't report DCD changes */ else if (port->c_dcd) { - wake_up_interruptible(&port->gs.open_wait); + wake_up_interruptible(&port->gs.port.open_wait); } else { - if (port->gs.tty) - tty_hangup (port->gs.tty); + if (port->gs.port.tty) + tty_hangup (port->gs.port.tty); } } SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET); @@ -578,7 +579,7 @@ static void scc_disable_tx_interrupts(vo local_irq_save(flags); SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - port->gs.flags &= ~GS_TX_INTEN; + port->gs.port.flags &= ~GS_TX_INTEN; local_irq_restore(flags); } @@ -636,8 +637,8 @@ static void scc_shutdown_port(void *ptr) { struct scc_port *port = ptr; - port->gs.flags &= ~ GS_ACTIVE; - if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) { + port->gs.port.flags &= ~ GS_ACTIVE; + if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { scc_setsignals (port, 0, 0); } } @@ -652,14 +653,14 @@ static int scc_set_real_termios (void *p struct scc_port *port = ptr; SCC_ACCESS_INIT(port); - if (!port->gs.tty || !port->gs.tty->termios) return 0; + if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; channel = port->channel; if (channel == CHANNEL_A) return 0; /* Settings controlled by boot PROM */ - cflag = port->gs.tty->termios->c_cflag; + cflag = port->gs.port.tty->termios->c_cflag; baud = port->gs.baud; chsize = (cflag & CSIZE) >> 4; @@ -678,9 +679,9 @@ static int scc_set_real_termios (void *p } if (cflag & CLOCAL) - port->gs.flags &= ~ASYNC_CHECK_CD; + port->gs.port.flags &= ~ASYNC_CHECK_CD; else - port->gs.flags |= ASYNC_CHECK_CD; + port->gs.port.flags |= ASYNC_CHECK_CD; #ifdef CONFIG_MVME147_SCC if (MACH_IS_MVME147) @@ -856,7 +857,7 @@ static int scc_open (struct tty_struct * { COMMAND_REG, CR_EXTSTAT_RESET }, }; #endif - if (!(port->gs.flags & ASYNC_INITIALIZED)) { + if (!(port->gs.port.flags & ASYNC_INITIALIZED)) { local_irq_save(flags); #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC) if (MACH_IS_MVME147 || MACH_IS_MVME16x) { @@ -880,18 +881,18 @@ static int scc_open (struct tty_struct * } tty->driver_data = port; - port->gs.tty = tty; - port->gs.count++; + port->gs.port.tty = tty; + port->gs.port.count++; retval = gs_init_port(&port->gs); if (retval) { - port->gs.count--; + port->gs.port.count--; return retval; } - port->gs.flags |= GS_ACTIVE; + port->gs.port.flags |= GS_ACTIVE; retval = gs_block_til_ready(port, filp); if (retval) { - port->gs.count--; + port->gs.port.count--; return retval; } _ Patches currently in -mm which might be from geert@xxxxxxxxxxxxxx are origin.patch linux-next.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html