The patch titled memstick: allow "set_param" method to return an error code has been removed from the -mm tree. Its filename was memstick-allow-set_param-method-to-return-an-error-code.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: memstick: allow "set_param" method to return an error code From: Alex Dubov <oakad@xxxxxxxxx> Some controllers (Jmicron, for instance) can report temporal failure condition during power-on. It is desirable to account for this using a return value of "set_param" device method. The return value can also be handy to distinguish between supported and unsupported device parameters in run time. [akpm@xxxxxxxxxxxxxxxxxxxx: coding-style fixes] Signed-off-by: Alex Dubov <oakad@xxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/memstick/core/memstick.c | 18 +++++-- drivers/memstick/host/jmb38x_ms.c | 67 ++++++++++++++++++++-------- drivers/memstick/host/tifm_ms.c | 17 +++---- include/linux/memstick.h | 2 4 files changed, 71 insertions(+), 33 deletions(-) diff -puN drivers/memstick/core/memstick.c~memstick-allow-set_param-method-to-return-an-error-code drivers/memstick/core/memstick.c --- a/drivers/memstick/core/memstick.c~memstick-allow-set_param-method-to-return-an-error-code +++ a/drivers/memstick/core/memstick.c @@ -415,10 +415,14 @@ err_out: return NULL; } -static void memstick_power_on(struct memstick_host *host) +static int memstick_power_on(struct memstick_host *host) { - host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON); - host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL); + int rc = host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON); + + if (!rc) + rc = host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL); + + return rc; } static void memstick_check(struct work_struct *work) @@ -573,11 +577,15 @@ EXPORT_SYMBOL(memstick_suspend_host); */ void memstick_resume_host(struct memstick_host *host) { + int rc = 0; + mutex_lock(&host->lock); if (host->card) - memstick_power_on(host); + rc = memstick_power_on(host); mutex_unlock(&host->lock); - memstick_detect_change(host); + + if (!rc) + memstick_detect_change(host); } EXPORT_SYMBOL(memstick_resume_host); diff -puN drivers/memstick/host/jmb38x_ms.c~memstick-allow-set_param-method-to-return-an-error-code drivers/memstick/host/jmb38x_ms.c --- a/drivers/memstick/host/jmb38x_ms.c~memstick-allow-set_param-method-to-return-an-error-code +++ a/drivers/memstick/host/jmb38x_ms.c @@ -609,36 +609,68 @@ static void jmb38x_ms_request(struct mem spin_unlock_irqrestore(&host->lock, flags); } -static void jmb38x_ms_reset(struct jmb38x_ms_host *host) +static int jmb38x_ms_reset(struct jmb38x_ms_host *host) { - unsigned int host_ctl = readl(host->addr + HOST_CONTROL); + int cnt; + + writel(HOST_CONTROL_RESET_REQ | HOST_CONTROL_CLOCK_EN + | readl(host->addr + HOST_CONTROL), + host->addr + HOST_CONTROL); + mmiowb(); + + for (cnt = 0; cnt < 20; ++cnt) { + if (!(HOST_CONTROL_RESET_REQ + & readl(host->addr + HOST_CONTROL))) + goto reset_next; + + ndelay(20); + } + dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n"); + return -EIO; + +reset_next: + writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN + | readl(host->addr + HOST_CONTROL), + host->addr + HOST_CONTROL); + mmiowb(); - writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL); + for (cnt = 0; cnt < 20; ++cnt) { + if (!(HOST_CONTROL_RESET + & readl(host->addr + HOST_CONTROL))) + goto reset_ok; - while (HOST_CONTROL_RESET_REQ - & (host_ctl = readl(host->addr + HOST_CONTROL))) { ndelay(20); - dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl); } + dev_dbg(&host->chip->pdev->dev, "reset timeout\n"); + return -EIO; - writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL); +reset_ok: mmiowb(); writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE); writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE); + return 0; } -static void jmb38x_ms_set_param(struct memstick_host *msh, - enum memstick_param param, - int value) +static int jmb38x_ms_set_param(struct memstick_host *msh, + enum memstick_param param, + int value) { struct jmb38x_ms_host *host = memstick_priv(msh); unsigned int host_ctl = readl(host->addr + HOST_CONTROL); unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0; + int rc = 0; switch (param) { case MEMSTICK_POWER: if (value == MEMSTICK_POWER_ON) { - jmb38x_ms_reset(host); + rc = jmb38x_ms_reset(host); + if (rc) + return rc; + + host_ctl = 7; + host_ctl |= HOST_CONTROL_POWER_EN + | HOST_CONTROL_CLOCK_EN; + writel(host_ctl, host->addr + HOST_CONTROL); writel(host->id ? PAD_PU_PD_ON_MS_SOCK1 : PAD_PU_PD_ON_MS_SOCK0, @@ -647,11 +679,7 @@ static void jmb38x_ms_set_param(struct m writel(PAD_OUTPUT_ENABLE_MS, host->addr + PAD_OUTPUT_ENABLE); - host_ctl = 7; - host_ctl |= HOST_CONTROL_POWER_EN - | HOST_CONTROL_CLOCK_EN; - writel(host_ctl, host->addr + HOST_CONTROL); - + msleep(10); dev_dbg(&host->chip->pdev->dev, "power on\n"); } else if (value == MEMSTICK_POWER_OFF) { host_ctl &= ~(HOST_CONTROL_POWER_EN @@ -660,7 +688,8 @@ static void jmb38x_ms_set_param(struct m writel(0, host->addr + PAD_OUTPUT_ENABLE); writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD); dev_dbg(&host->chip->pdev->dev, "power off\n"); - } + } else + return -EINVAL; break; case MEMSTICK_INTERFACE: host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT); @@ -686,12 +715,14 @@ static void jmb38x_ms_set_param(struct m host_ctl &= ~HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_60MHZ; clock_delay = 0; - } + } else + return -EINVAL; writel(host_ctl, host->addr + HOST_CONTROL); writel(clock_ctl, host->addr + CLOCK_CONTROL); writel(clock_delay, host->addr + CLOCK_DELAY); break; }; + return 0; } #ifdef CONFIG_PM diff -puN drivers/memstick/host/tifm_ms.c~memstick-allow-set_param-method-to-return-an-error-code drivers/memstick/host/tifm_ms.c --- a/drivers/memstick/host/tifm_ms.c~memstick-allow-set_param-method-to-return-an-error-code +++ a/drivers/memstick/host/tifm_ms.c @@ -489,15 +489,12 @@ static void tifm_ms_request(struct memst return; } -static void tifm_ms_set_param(struct memstick_host *msh, - enum memstick_param param, - int value) +static int tifm_ms_set_param(struct memstick_host *msh, + enum memstick_param param, + int value) { struct tifm_ms *host = memstick_priv(msh); struct tifm_dev *sock = host->dev; - unsigned long flags; - - spin_lock_irqsave(&sock->lock, flags); switch (param) { case MEMSTICK_POWER: @@ -512,7 +509,8 @@ static void tifm_ms_set_param(struct mem writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR, sock->addr + SOCK_MS_SYSTEM); writel(0xffffffff, sock->addr + SOCK_MS_STATUS); - } + } else + return -EINVAL; break; case MEMSTICK_INTERFACE: if (value == MEMSTICK_SERIAL) { @@ -525,11 +523,12 @@ static void tifm_ms_set_param(struct mem writel(TIFM_CTRL_FAST_CLK | readl(sock->addr + SOCK_CONTROL), sock->addr + SOCK_CONTROL); - } + } else + return -EINVAL; break; }; - spin_unlock_irqrestore(&sock->lock, flags); + return 0; } static void tifm_ms_abort(unsigned long data) diff -puN include/linux/memstick.h~memstick-allow-set_param-method-to-return-an-error-code include/linux/memstick.h --- a/include/linux/memstick.h~memstick-allow-set_param-method-to-return-an-error-code +++ a/include/linux/memstick.h @@ -284,7 +284,7 @@ struct memstick_host { /* Notify the host that some requests are pending. */ void (*request)(struct memstick_host *host); /* Set host IO parameters (power, clock, etc). */ - void (*set_param)(struct memstick_host *host, + int (*set_param)(struct memstick_host *host, enum memstick_param param, int value); unsigned long private[0] ____cacheline_aligned; _ Patches currently in -mm which might be from oakad@xxxxxxxxx are origin.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html