The patch titled
edac: core fix redundant sysfs controls to parameters
has been removed from the -mm tree. Its filename was
edac-core-fix-redundant-sysfs-controls-to-parameters.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: edac: core fix redundant sysfs controls to parameters
From: Arthur Jones <ajones@xxxxxxxxxxxx>
/sys/devices/system/edac/mc has a few files which are duplicated in
/sys/module/edac_core/parameters. Now that all the functionality is
duplicated between these two locations, we remove the former kobject
attributes and update the documentation.
Signed-off-by: Arthur Jones <ajones@xxxxxxxxxxxx>
Signed-off-by: Doug Thompson <dougthompson@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/edac.txt | 151 +++++++++++++++------------------
drivers/edac/edac_mc_sysfs.c | 117 -------------------------
2 files changed, 73 insertions(+), 195 deletions(-)
diff -puN Documentation/edac.txt~edac-core-fix-redundant-sysfs-controls-to-parameters Documentation/edac.txt
--- a/Documentation/edac.txt~edac-core-fix-redundant-sysfs-controls-to-parameters
+++ a/Documentation/edac.txt
@@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, th
set of DIMMs for channels 0 and 1.
-Within each of the 'mc','mcX' and 'csrowX' directories are several
+Within each of the 'mcX' and 'csrowX' directories are several
EDAC control and attribute files.
-
-============================================================================
-DIRECTORY 'mc'
-
-In directory 'mc' are EDAC system overall control and attribute files:
-
-
-Panic on UE control file:
-
- 'edac_mc_panic_on_ue'
-
- An uncorrectable error will cause a machine panic. This is usually
- desirable. It is a bad idea to continue when an uncorrectable error
- occurs - it is indeterminate what was uncorrected and the operating
- system context might be so mangled that continuing will lead to further
- corruption. If the kernel has MCE configured, then EDAC will never
- notice the UE.
-
- LOAD TIME: module/kernel parameter: panic_on_ue=[0|1]
-
- RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue
-
-
-Log UE control file:
-
- 'edac_mc_log_ue'
-
- Generate kernel messages describing uncorrectable errors. These errors
- are reported through the system message log system. UE statistics
- will be accumulated even when UE logging is disabled.
-
- LOAD TIME: module/kernel parameter: log_ue=[0|1]
-
- RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue
-
-
-Log CE control file:
-
- 'edac_mc_log_ce'
-
- Generate kernel messages describing correctable errors. These
- errors are reported through the system message log system.
- CE statistics will be accumulated even when CE logging is disabled.
-
- LOAD TIME: module/kernel parameter: log_ce=[0|1]
-
- RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce
-
-
-Polling period control file:
-
- 'edac_mc_poll_msec'
-
- The time period, in milliseconds, for polling for error information.
- Too small a value wastes resources. Too large a value might delay
- necessary handling of errors and might loose valuable information for
- locating the error. 1000 milliseconds (once each second) is the current
- default. Systems which require all the bandwidth they can get, may
- increase this.
-
- LOAD TIME: module/kernel parameter: poll_msec=[0|1]
-
- RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec
-
-
============================================================================
'mcX' DIRECTORIES
@@ -537,7 +472,6 @@ Channel 1 DIMM Label control file:
motherboard specific and determination of this information
must occur in userland at this time.
-
============================================================================
SYSTEM LOGGING
@@ -570,7 +504,6 @@ error type, a notice of "no info" and th
driver-specific error message.
-
============================================================================
PCI Bus Parity Detection
@@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking contr
echo "0" >/sys/devices/system/edac/pci/check_pci_parity
+Parity Count:
+
+ 'pci_parity_count'
+
+ This attribute file will display the number of parity errors that
+ have been detected.
+
+
+============================================================================
+MODULE PARAMETERS
+
+Panic on UE control file:
+
+ 'edac_mc_panic_on_ue'
+
+ An uncorrectable error will cause a machine panic. This is usually
+ desirable. It is a bad idea to continue when an uncorrectable error
+ occurs - it is indeterminate what was uncorrected and the operating
+ system context might be so mangled that continuing will lead to further
+ corruption. If the kernel has MCE configured, then EDAC will never
+ notice the UE.
+
+ LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1]
+
+ RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue
+
+
+Log UE control file:
+
+ 'edac_mc_log_ue'
+
+ Generate kernel messages describing uncorrectable errors. These errors
+ are reported through the system message log system. UE statistics
+ will be accumulated even when UE logging is disabled.
+
+ LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1]
+
+ RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue
+
+
+Log CE control file:
+
+ 'edac_mc_log_ce'
+
+ Generate kernel messages describing correctable errors. These
+ errors are reported through the system message log system.
+ CE statistics will be accumulated even when CE logging is disabled.
+
+ LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1]
+
+ RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce
+
+
+Polling period control file:
+
+ 'edac_mc_poll_msec'
+
+ The time period, in milliseconds, for polling for error information.
+ Too small a value wastes resources. Too large a value might delay
+ necessary handling of errors and might loose valuable information for
+ locating the error. 1000 milliseconds (once each second) is the current
+ default. Systems which require all the bandwidth they can get, may
+ increase this.
+
+ LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1]
+
+ RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec
+
Panic on PCI PARITY Error:
@@ -614,21 +615,13 @@ Panic on PCI PARITY Error:
error has been detected.
- module/kernel parameter: panic_on_pci_parity=[0|1]
+ module/kernel parameter: edac_panic_on_pci_pe=[0|1]
Enable:
- echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity
+ echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
Disable:
- echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity
-
-
-Parity Count:
-
- 'pci_parity_count'
-
- This attribute file will display the number of parity errors that
- have been detected.
+ echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
diff -puN drivers/edac/edac_mc_sysfs.c~edac-core-fix-redundant-sysfs-controls-to-parameters drivers/edac/edac_mc_sysfs.c
--- a/drivers/edac/edac_mc_sysfs.c~edac-core-fix-redundant-sysfs-controls-to-parameters
+++ a/drivers/edac/edac_mc_sysfs.c
@@ -123,16 +123,6 @@ static const char *edac_caps[] = {
-/*
- * /sys/devices/system/edac/mc;
- * data structures and methods
- */
-static ssize_t memctrl_int_show(void *ptr, char *buffer)
-{
- int *value = (int *)ptr;
- return sprintf(buffer, "%u\n", *value);
-}
-
static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
{
int *value = (int *)ptr;
@@ -143,23 +133,6 @@ static ssize_t memctrl_int_store(void *p
return count;
}
-/*
- * mc poll_msec time value
- */
-static ssize_t poll_msec_int_store(void *ptr, const char *buffer, size_t count)
-{
- int *value = (int *)ptr;
-
- if (isdigit(*buffer)) {
- *value = simple_strtoul(buffer, NULL, 0);
-
- /* notify edac_mc engine to reset the poll period */
- edac_mc_reset_delay_period(*value);
- }
-
- return count;
-}
-
/* EDAC sysfs CSROW data structures and methods
*/
@@ -669,98 +642,10 @@ static struct kobj_type ktype_mci = {
.default_attrs = (struct attribute **)mci_attr,
};
-/* show/store, tables, etc for the MC kset */
-
-
-struct memctrl_dev_attribute {
- struct attribute attr;
- void *value;
- ssize_t(*show) (void *, char *);
- ssize_t(*store) (void *, const char *, size_t);
-};
-
-/* Set of show/store abstract level functions for memory control object */
-static ssize_t memctrl_dev_show(struct kobject *kobj,
- struct attribute *attr, char *buffer)
-{
- struct memctrl_dev_attribute *memctrl_dev;
- memctrl_dev = (struct memctrl_dev_attribute *)attr;
-
- if (memctrl_dev->show)
- return memctrl_dev->show(memctrl_dev->value, buffer);
-
- return -EIO;
-}
-
-static ssize_t memctrl_dev_store(struct kobject *kobj, struct attribute *attr,
- const char *buffer, size_t count)
-{
- struct memctrl_dev_attribute *memctrl_dev;
- memctrl_dev = (struct memctrl_dev_attribute *)attr;
-
- if (memctrl_dev->store)
- return memctrl_dev->store(memctrl_dev->value, buffer, count);
-
- return -EIO;
-}
-
-static struct sysfs_ops memctrlfs_ops = {
- .show = memctrl_dev_show,
- .store = memctrl_dev_store
-};
-
-#define MEMCTRL_ATTR(_name, _mode, _show, _store) \
-static struct memctrl_dev_attribute attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode }, \
- .value = &_name, \
- .show = _show, \
- .store = _store, \
-};
-
-#define MEMCTRL_STRING_ATTR(_name, _data, _mode, _show, _store) \
-static struct memctrl_dev_attribute attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode }, \
- .value = _data, \
- .show = _show, \
- .store = _store, \
-};
-
-/* csrow<id> control files */
-MEMCTRL_ATTR(edac_mc_panic_on_ue,
- S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_log_ue,
- S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_log_ce,
- S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_poll_msec,
- S_IRUGO | S_IWUSR, memctrl_int_show, poll_msec_int_store);
-
-/* Base Attributes of the memory ECC object */
-static struct memctrl_dev_attribute *memctrl_attr[] = {
- &attr_edac_mc_panic_on_ue,
- &attr_edac_mc_log_ue,
- &attr_edac_mc_log_ce,
- &attr_edac_mc_poll_msec,
- NULL,
-};
-
-
-/* the ktype for the mc_kset internal kobj */
-static struct kobj_type ktype_mc_set_attribs = {
- .sysfs_ops = &memctrlfs_ops,
- .default_attrs = (struct attribute **)memctrl_attr,
-};
-
/* EDAC memory controller sysfs kset:
* /sys/devices/system/edac/mc
*/
-static struct kset mc_kset = {
- .kobj = {.ktype = &ktype_mc_set_attribs },
-};
-
+static struct kset mc_kset;
/*
* edac_mc_register_sysfs_main_kobj
_
Patches currently in -mm which might be from ajones@xxxxxxxxxxxx are
origin.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
