The patch titled
watchdog: ks8695_wdt: clean up, coding style, unlocked_ioctl
has been removed from the -mm tree. Its filename was
watchdog-ks8695_wdt-clean-up-coding-style-unlocked_ioctl.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: watchdog: ks8695_wdt: clean up, coding style, unlocked_ioctl
From: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/watchdog/ks8695_wdt.c | 119 ++++++++++++++++----------------
1 file changed, 62 insertions(+), 57 deletions(-)
diff -puN drivers/watchdog/ks8695_wdt.c~watchdog-ks8695_wdt-clean-up-coding-style-unlocked_ioctl drivers/watchdog/ks8695_wdt.c
--- a/drivers/watchdog/ks8695_wdt.c~watchdog-ks8695_wdt-clean-up-coding-style-unlocked_ioctl
+++ a/drivers/watchdog/ks8695_wdt.c
@@ -19,8 +19,8 @@
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/watchdog.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <asm/arch/regs-timer.h>
@@ -31,38 +31,44 @@ static int wdt_time = WDT_DEFAULT_TIME;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(wdt_time, int, 0);
-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+ __MODULE_STRING(WDT_DEFAULT_TIME) ")");
#ifdef CONFIG_WATCHDOG_NOWAYOUT
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
#endif
static unsigned long ks8695wdt_busy;
+static spinlock_t ks8695_lock;
/* ......................................................................... */
/*
* Disable the watchdog.
*/
-static void inline ks8695_wdt_stop(void)
+static inline void ks8695_wdt_stop(void)
{
unsigned long tmcon;
+ spin_lock(&ks8695_lock);
/* disable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+ spin_unlock(&ks8695_lock);
}
/*
* Enable and reset the watchdog.
*/
-static void inline ks8695_wdt_start(void)
+static inline void ks8695_wdt_start(void)
{
unsigned long tmcon;
unsigned long tval = wdt_time * CLOCK_TICK_RATE;
+ spin_lock(&ks8695_lock);
/* disable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
@@ -73,19 +79,22 @@ static void inline ks8695_wdt_start(void
/* re-enable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+ spin_unlock(&ks8695_lock);
}
/*
* Reload the watchdog timer. (ie, pat the watchdog)
*/
-static void inline ks8695_wdt_reload(void)
+static inline void ks8695_wdt_reload(void)
{
unsigned long tmcon;
+ spin_lock(&ks8695_lock);
/* disable, then re-enable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+ spin_unlock(&ks8695_lock);
}
/*
@@ -102,7 +111,8 @@ static int ks8695_wdt_settimeout(int new
if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
return -EINVAL;
- /* Set new watchdog time. It will be used when ks8695_wdt_start() is called. */
+ /* Set new watchdog time. It will be used when
+ ks8695_wdt_start() is called. */
wdt_time = new_time;
return 0;
}
@@ -128,9 +138,9 @@ static int ks8695_wdt_open(struct inode
*/
static int ks8695_wdt_close(struct inode *inode, struct file *file)
{
+ /* Disable the watchdog when file is closed */
if (!nowayout)
- ks8695_wdt_stop(); /* Disable the watchdog when file is closed */
-
+ ks8695_wdt_stop();
clear_bit(0, &ks8695wdt_busy);
return 0;
}
@@ -143,60 +153,52 @@ static struct watchdog_info ks8695_wdt_i
/*
* Handle commands from user-space.
*/
-static int ks8695_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_value;
- switch(cmd) {
- case WDIOC_KEEPALIVE:
- ks8695_wdt_reload(); /* pat the watchdog */
- return 0;
-
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
-
- case WDIOC_SETTIMEOUT:
- if (get_user(new_value, p))
- return -EFAULT;
-
- if (ks8695_wdt_settimeout(new_value))
- return -EINVAL;
-
- /* Enable new time value */
+ switch (cmd) {
+ case WDIOC_KEEPALIVE:
+ ks8695_wdt_reload(); /* pat the watchdog */
+ return 0;
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ks8695_wdt_info,
+ sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_value, p))
+ return -EFAULT;
+ if (ks8695_wdt_settimeout(new_value))
+ return -EINVAL;
+ /* Enable new time value */
+ ks8695_wdt_start();
+ /* Return current value */
+ return put_user(wdt_time, p);
+ case WDIOC_GETTIMEOUT:
+ return put_user(wdt_time, p);
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+ case WDIOC_SETOPTIONS:
+ if (get_user(new_value, p))
+ return -EFAULT;
+ if (new_value & WDIOS_DISABLECARD)
+ ks8695_wdt_stop();
+ if (new_value & WDIOS_ENABLECARD)
ks8695_wdt_start();
-
- /* Return current value */
- return put_user(wdt_time, p);
-
- case WDIOC_GETTIMEOUT:
- return put_user(wdt_time, p);
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
-
- case WDIOC_SETOPTIONS:
- if (get_user(new_value, p))
- return -EFAULT;
-
- if (new_value & WDIOS_DISABLECARD)
- ks8695_wdt_stop();
- if (new_value & WDIOS_ENABLECARD)
- ks8695_wdt_start();
- return 0;
-
- default:
- return -ENOTTY;
+ return 0;
+ default:
+ return -ENOTTY;
}
}
/*
* Pat the watchdog whenever device is written to.
*/
-static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+static ssize_t ks8695_wdt_write(struct file *file, const char *data,
+ size_t len, loff_t *ppos)
{
ks8695_wdt_reload(); /* pat the watchdog */
return len;
@@ -207,7 +209,7 @@ static ssize_t ks8695_wdt_write(struct f
static const struct file_operations ks8695wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = ks8695_wdt_ioctl,
+ .unlocked_ioctl = ks8695_wdt_ioctl,
.open = ks8695_wdt_open,
.release = ks8695_wdt_close,
.write = ks8695_wdt_write,
@@ -231,7 +233,8 @@ static int __init ks8695wdt_probe(struct
if (res)
return res;
- printk("KS8695 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : "");
+ printk(KERN_INFO "KS8695 Watchdog Timer enabled (%d seconds%s)\n",
+ wdt_time, nowayout ? ", nowayout" : "");
return 0;
}
@@ -285,12 +288,14 @@ static struct platform_driver ks8695wdt_
static int __init ks8695_wdt_init(void)
{
- /* Check that the heartbeat value is within range; if not reset to the default */
+ spin_lock_init(&ks8695_lock);
+ /* Check that the heartbeat value is within range;
+ if not reset to the default */
if (ks8695_wdt_settimeout(wdt_time)) {
ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
- pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", wdt_time, WDT_MAX_TIME);
+ pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n",
+ wdt_time, WDT_MAX_TIME);
}
-
return platform_driver_register(&ks8695wdt_driver);
}
_
Patches currently in -mm which might be from alan@xxxxxxxxxx are
origin.patch
linux-next.patch
ia64-hp-sim-simserialc-adapt-to-new-tty-framework.patch
remove-is_tty.patch
mn10300-fix-mn10300s-serial-port-driver-to-get-at-its-tty_struct.patch
hamradio-add-missing-sanity-check-to-tty-operation.patch
git-watchdog.patch
serial-8250_gscc-add-module_license.patch
serial-add-support-for-a-no-name-4-ports-multiserial-card.patch
istallion-remove-unused-variable.patch
stallion-removed-unused-variable.patch
spidev-bkl-removal.patch
rtc-push-the-bkl-down-into-the-driver-ioctl-method.patch
efirtc-push-down-the-bkl.patch
ip2-push-bkl-down-for-the-firmware-interface.patch
mwave-ioctl-bkl-pushdown.patch
rio-push-down-the-bkl-into-the-firmware-ioctl-handler.patch
sx-push-bkl-down-into-the-firmware-ioctl-handler.patch
ixj-push-bkl-into-driver-and-wrap-ioctls.patch
ppdev-wrap-ioctl-handler-in-driver-and-push-lock-down.patch
ds1302-push-down-the-bkl-into-the-driver-ioctl-code.patch
dsp56k-bkl-pushdown.patch
char-mxser-ioctl-cleanup.patch
char-mxser-globals-cleanup.patch
char-mxser-update-documentation.patch
char-mxser-prints-cleanup.patch
char-mxser-remove-predefined-isa-support.patch
char-mxser-various-cleanups.patch
unexport-proc_clear_tty.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
