The patch titled
asic3: new gpio configuration code
has been removed from the -mm tree. Its filename was
asic3-new-gpio-configuration-code.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: asic3: new gpio configuration code
From: Samuel Ortiz <sameo@xxxxxxxxxxxxxx>
The ASIC3 GPIO configuration code is a bit obscure and hardly readable.
This patch changes it so that it is now more readable and understandable,
by being more explicit.
Signed-off-by: Samuel Ortiz <sameo@xxxxxxxxxxxxxx>
Cc: David Brownell <david-b@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mfd/asic3.c | 99 +++++++++++++++---------------------
include/linux/mfd/asic3.h | 34 ++++++++----
2 files changed, 67 insertions(+), 66 deletions(-)
diff -puN drivers/mfd/asic3.c~asic3-new-gpio-configuration-code drivers/mfd/asic3.c
--- a/drivers/mfd/asic3.c~asic3-new-gpio-configuration-code
+++ a/drivers/mfd/asic3.c
@@ -468,69 +468,54 @@ static void asic3_gpio_set(struct gpio_c
return;
}
-static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base,
- unsigned int function)
+static int asic3_gpio_probe(struct platform_device *pdev,
+ u16 *gpio_config, int num)
{
- return asic3_read_register(asic, base + function);
-}
-
-static void asic3_set_gpio(struct asic3 *asic, unsigned int base,
- unsigned int function, u32 bits, u32 val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&asic->lock, flags);
- val |= (asic3_read_register(asic, base + function) & ~bits);
-
- asic3_write_register(asic, base + function, val);
- spin_unlock_irqrestore(&asic->lock, flags);
-}
-
-#define asic3_set_gpio_a(asic, fn, bits, val) \
- asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val)
-#define asic3_set_gpio_b(asic, fn, bits, val) \
- asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val)
-#define asic3_set_gpio_c(asic, fn, bits, val) \
- asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val)
-#define asic3_set_gpio_d(asic, fn, bits, val) \
- asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val)
-
-#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \
- do { \
- asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \
- asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \
- asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \
- asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \
- } while (0)
-
-
-static int asic3_gpio_probe(struct platform_device *pdev)
-{
- struct asic3_platform_data *pdata = pdev->dev.platform_data;
struct asic3 *asic = platform_get_drvdata(pdev);
+ u16 alt_reg[ASIC3_NUM_GPIO_BANKS];
+ u16 out_reg[ASIC3_NUM_GPIO_BANKS];
+ u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
+ int i;
+
+ memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS);
+ memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS);
+ memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS);
+ /* Enable all GPIOs */
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
- asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff);
- asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff);
- asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff);
- asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff);
-
- if (pdata) {
- asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init);
- asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir);
- asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata,
- sleep_mask);
- asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out);
- asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata,
- batt_fault_out);
- asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata,
- sleep_conf);
- asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata,
- alt_function);
+ for (i = 0; i < num; i++) {
+ u8 alt, pin, dir, init, bank_num, bit_num;
+ u16 config = gpio_config[i];
+
+ pin = ASIC3_CONFIG_GPIO_PIN(config);
+ alt = ASIC3_CONFIG_GPIO_ALT(config);
+ dir = ASIC3_CONFIG_GPIO_DIR(config);
+ init = ASIC3_CONFIG_GPIO_INIT(config);
+
+ bank_num = ASIC3_GPIO_TO_BANK(pin);
+ bit_num = ASIC3_GPIO_TO_BIT(pin);
+
+ alt_reg[bank_num] |= (alt << bit_num);
+ out_reg[bank_num] |= (init << bit_num);
+ dir_reg[bank_num] |= (dir << bit_num);
+ }
+
+ for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) {
+ asic3_write_register(asic,
+ ASIC3_BANK_TO_BASE(i) +
+ ASIC3_GPIO_Direction,
+ dir_reg[i]);
+ asic3_write_register(asic,
+ ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_Out,
+ out_reg[i]);
+ asic3_write_register(asic,
+ ASIC3_BANK_TO_BASE(i) +
+ ASIC3_GPIO_AltFunction,
+ alt_reg[i]);
}
return gpiochip_add(&asic->gpio);
@@ -601,7 +586,9 @@ static int asic3_probe(struct platform_d
asic->gpio.direction_input = asic3_gpio_direction_input;
asic->gpio.direction_output = asic3_gpio_direction_output;
- ret = asic3_gpio_probe(pdev);
+ ret = asic3_gpio_probe(pdev,
+ pdata->gpio_config,
+ pdata->gpio_config_num);
if (ret < 0) {
printk(KERN_ERR "GPIO probe failed\n");
goto out_irq;
diff -puN include/linux/mfd/asic3.h~asic3-new-gpio-configuration-code include/linux/mfd/asic3.h
--- a/include/linux/mfd/asic3.h~asic3-new-gpio-configuration-code
+++ a/include/linux/mfd/asic3.h
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*
* Copyright 2001 Compaq Computer Corporation.
- * Copyright 2007 OpendHand.
+ * Copyright 2007-2008 OpenedHand Ltd.
*/
#ifndef __ASIC3_H__
@@ -17,15 +17,8 @@
#include <linux/types.h>
struct asic3_platform_data {
- struct {
- u32 dir;
- u32 init;
- u32 sleep_mask;
- u32 sleep_out;
- u32 batt_fault_out;
- u32 sleep_conf;
- u32 alt_function;
- } gpio_a, gpio_b, gpio_c, gpio_d;
+ u16 *gpio_config;
+ unsigned int gpio_config_num;
unsigned int bus_shift;
@@ -86,6 +79,27 @@ struct asic3_platform_data {
*/
#define ASIC3_GPIO_Status 0x30 /* R Pin status */
+/*
+ * ASIC3 GPIO config
+ *
+ * Bits 0..6 gpio number
+ * Bits 7..13 Alternate function
+ * Bit 14 Direction
+ * Bit 15 Initial value
+ *
+ */
+#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f)
+#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7)
+#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14)
+#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15)
+#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \
+ | (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \
+ | (((init) & 0x1) << 15))
+#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \
+ ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init))
+#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \
+ ASIC3_CONFIG_GPIO((gpio), 0, 1, (init))
+
#define ASIC3_SPI_Base 0x0400
#define ASIC3_SPI_Control 0x0000
#define ASIC3_SPI_TxData 0x0004
_
Patches currently in -mm which might be from sameo@xxxxxxxxxxxxxx are
linux-next.patch
asic3-platform_get_irq-may-return-signed-unnoticed.patch
gpiolib-allow-user-selection.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
