The patch titled sm501: add power control callback has been added to the -mm tree. Its filename is sm501-add-power-control-callback.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: sm501: add power control callback From: Ben Dooks <ben-linux@xxxxxxxxx> Add callback to get or set the power control if the device has the sleep connected to some form of GPIO. Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx> Cc: Arnaud Patard <apatard@xxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/mfd/sm501.c | 31 +++++++++++++++++++++++++++++++ include/linux/sm501.h | 7 +++++++ 2 files changed, 38 insertions(+) diff -puN drivers/mfd/sm501.c~sm501-add-power-control-callback drivers/mfd/sm501.c --- a/drivers/mfd/sm501.c~sm501-add-power-control-callback +++ a/drivers/mfd/sm501.c @@ -1138,8 +1138,31 @@ static int sm501_plat_probe(struct platf } #ifdef CONFIG_PM + /* power management support */ +static void sm501_set_power(struct sm501_devdata *sm, int on) +{ + struct sm501_platdata *pd = sm->platdata; + + if (pd == NULL) + return; + + if (pd->get_power) { + if (pd->get_power(sm->dev) == on) { + dev_dbg(sm->dev, "is already %d\n", on); + return; + } + } + + if (pd->set_power) { + dev_dbg(sm->dev, "setting power to %d\n", on); + + pd->set_power(sm->dev, on); + sm501_mdelay(sm, 10); + } +} + static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state) { struct sm501_devdata *sm = platform_get_drvdata(pdev); @@ -1148,6 +1171,12 @@ static int sm501_plat_suspend(struct pla sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL); sm501_dump_regs(sm); + + if (sm->platdata) { + if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF) + sm501_set_power(sm, 0); + } + return 0; } @@ -1155,6 +1184,8 @@ static int sm501_plat_resume(struct plat { struct sm501_devdata *sm = platform_get_drvdata(pdev); + sm501_set_power(sm, 1); + sm501_dump_regs(sm); sm501_dump_gate(sm); sm501_dump_clk(sm); diff -puN include/linux/sm501.h~sm501-add-power-control-callback include/linux/sm501.h --- a/include/linux/sm501.h~sm501-add-power-control-callback +++ a/include/linux/sm501.h @@ -155,6 +155,8 @@ struct sm501_init_gpio { struct sm501_reg_init gpio_ddr_high; }; +#define SM501_FLAG_SUSPEND_OFF (1<<4) + /* sm501_platdata * * This is passed with the platform device to allow the board @@ -168,6 +170,11 @@ struct sm501_platdata { struct sm501_init_gpio *init_gpiop; struct sm501_platdata_fb *fb; + int flags; + + int (*get_power)(struct device *dev); + int (*set_power)(struct device *dev, unsigned int on); + struct sm501_platdata_gpio_i2c *gpio_i2c; unsigned int gpio_i2c_nr; }; _ Patches currently in -mm which might be from ben-linux@xxxxxxxxx are sm501-add-power-control-callback.patch sm501-add-gpiolib-support.patch sm501-gpio-dynamic-registration-for-pci-devices.patch sm501-gpio-i2c-support.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html