- hostap-procfs-fix-for-hostap_fwc.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     hostap: procfs fix for hostap_fw.c
has been removed from the -mm tree.  Its filename was
     hostap-procfs-fix-for-hostap_fwc.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: hostap: procfs fix for hostap_fw.c
From: Mathieu Chouquet-Stringer <mchouque@xxxxxxx>

I've been toying with hostap_pci and found a bug that is triggered when you
unload/reload the module.

If you don't have PRISM2_NO_PROCFS_DEBUG defined (which is the default, as per
hostap_config.h), the driver creates a "registers" file in /proc used to dump
PRISM registers (function prism2_init_local_data):

#ifndef PRISM2_NO_PROCFS_DEBUG
        create_proc_read_entry("registers", 0, local->proc,
                               prism2_registers_proc_read, local);
#endif /* PRISM2_NO_PROCFS_DEBUG */

Note that create_proc_read_entry is being called with local->proc which isn't
defined at the time: "registers" ends up being created as /proc/registers.

When hostap_pci is done initializing the hardware, it calls hostap_hw_ready
which in turns creates all the files in /proc through hostap_init_proc
(hostap_proc.c):

        local->proc = NULL;

        if (hostap_proc == NULL) {
                printk(KERN_WARNING "%s: hostap proc directory not created\n",
                       local->dev->name);
                return;
        }

        local->proc = proc_mkdir(local->ddev->name, hostap_proc);

So far so good, well sort of...  When you unload the module,
prism2_free_local_data does this:

#ifndef PRISM2_NO_PROCFS_DEBUG
        if (local->proc != NULL)
                remove_proc_entry("registers", local->proc);
#endif /* PRISM2_NO_PROCFS_DEBUG */
        hostap_remove_proc(local);

Problem is local->proc has now been overwritten by hostap_init_proc meaning
"registers" isn't removed.  When you reload the module you get an error
telling you "registers" already exists (and you then get duplicate "registers"
files in /proc).

So in a nutshell "registers" should be created after calling hostap_init_proc
(this way it'll be created where it belongs - /proc/net/hostap/%s) making it
removable at module unload.

Signed-off-by: Mathieu Chouquet-Stringer <mchouque@xxxxxxx>
Cc: Jouni Malinen <jkmaline@xxxxxxxxx>
Cc: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/net/wireless/hostap/hostap_hw.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff -puN drivers/net/wireless/hostap/hostap_hw.c~hostap-procfs-fix-for-hostap_fwc drivers/net/wireless/hostap/hostap_hw.c
--- a/drivers/net/wireless/hostap/hostap_hw.c~hostap-procfs-fix-for-hostap_fwc
+++ a/drivers/net/wireless/hostap/hostap_hw.c
@@ -3276,11 +3276,6 @@ while (0)
 	}
 	printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);
 
-#ifndef PRISM2_NO_PROCFS_DEBUG
-	create_proc_read_entry("registers", 0, local->proc,
-			       prism2_registers_proc_read, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
 	hostap_init_data(local);
 	return dev;
 
@@ -3307,6 +3302,10 @@ static int hostap_hw_ready(struct net_de
 			netif_carrier_off(local->ddev);
 		}
 		hostap_init_proc(local);
+#ifndef PRISM2_NO_PROCFS_DEBUG
+		create_proc_read_entry("registers", 0, local->proc,
+				prism2_registers_proc_read, local);
+#endif /* PRISM2_NO_PROCFS_DEBUG */
 		hostap_init_ap_proc(local);
 		return 0;
 	}
_

Patches currently in -mm which might be from mchouque@xxxxxxx are

linux-next.patch

--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux