The patch titled
powerpc: add i2c pins to dts and board setup
has been added to the -mm tree. Its filename is
powerpc-add-i2c-pins-to-dts-and-board-setup.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: powerpc: add i2c pins to dts and board setup
From: Jochen Friedrich <jochen@xxxxxxxx>
Initialize I2C pins on boards with CPM1/CPM2 controllers.
Signed-off-by: Jochen Friedrich <jochen@xxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 10 ++++++++++
arch/powerpc/boot/dts/mpc866ads.dts | 10 ++++++++++
arch/powerpc/boot/dts/mpc885ads.dts | 10 ++++++++++
arch/powerpc/platforms/82xx/mpc8272_ads.c | 4 ++++
arch/powerpc/platforms/8xx/mpc86xads_setup.c | 4 ++++
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 3 +++
6 files changed, 41 insertions(+)
diff -puN arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup arch/powerpc/boot/dts/mpc8272ads.dts
--- a/arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup
+++ a/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,16 @@
linux,network-index = <1>;
fsl,cpm-command = <0x16200300>;
};
+
+ i2c@11860 {
+ compatible = "fsl,mpc8272-i2c",
+ "fsl,cpm2-i2c",
+ "fsl,cpm-i2c";
+ reg = <11860 20 8afc 2>;
+ interrupts = <1 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <29600000>;
+ };
};
PIC: interrupt-controller@10c00 {
diff -puN arch/powerpc/boot/dts/mpc866ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup arch/powerpc/boot/dts/mpc866ads.dts
--- a/arch/powerpc/boot/dts/mpc866ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup
+++ a/arch/powerpc/boot/dts/mpc866ads.dts
@@ -171,6 +171,16 @@
fsl,cpm-command = <0000>;
linux,network-index = <1>;
};
+
+ i2c@860 {
+ compatible = "fsl,mpc866-i2c",
+ "fsl,cpm1-i2c",
+ "fsl,cpm-i2c";
+ reg = <860 20 3c80 30>;
+ interrupts = <10>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0010>;
+ };
};
};
diff -puN arch/powerpc/boot/dts/mpc885ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup arch/powerpc/boot/dts/mpc885ads.dts
--- a/arch/powerpc/boot/dts/mpc885ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup
+++ a/arch/powerpc/boot/dts/mpc885ads.dts
@@ -215,6 +215,16 @@
fsl,cpm-command = <0x80>;
linux,network-index = <2>;
};
+
+ i2c@860 {
+ compatible = "fsl,mpc885-i2c",
+ "fsl,cpm1-i2c",
+ "fsl,cpm-i2c";
+ reg = <860 20 3c80 30>;
+ interrupts = <10>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0010>;
+ };
};
};
diff -puN arch/powerpc/platforms/82xx/mpc8272_ads.c~powerpc-add-i2c-pins-to-dts-and-board-setup arch/powerpc/platforms/82xx/mpc8272_ads.c
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c~powerpc-add-i2c-pins-to-dts-and-board-setup
+++ a/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -96,6 +96,10 @@ static struct cpm_pin mpc8272_ads_pins[]
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* I2C */
+ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+ {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
diff -puN arch/powerpc/platforms/8xx/mpc86xads_setup.c~powerpc-add-i2c-pins-to-dts-and-board-setup arch/powerpc/platforms/8xx/mpc86xads_setup.c
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c~powerpc-add-i2c-pins-to-dts-and-board-setup
+++ a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -65,6 +65,10 @@ static struct cpm_pin mpc866ads_pins[] =
{CPM_PORTD, 13, CPM_PIN_OUTPUT},
{CPM_PORTD, 14, CPM_PIN_OUTPUT},
{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
diff -puN arch/powerpc/platforms/8xx/mpc885ads_setup.c~powerpc-add-i2c-pins-to-dts-and-board-setup arch/powerpc/platforms/8xx/mpc885ads_setup.c
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c~powerpc-add-i2c-pins-to-dts-and-board-setup
+++ a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -158,6 +158,9 @@ static struct cpm_pin mpc885ads_pins[] =
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
#endif
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
_
Patches currently in -mm which might be from jochen@xxxxxxxx are
powerpc-add-i2c-pins-to-dts-and-board-setup.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
