The patch titled
rapidio: add RapidIO connection info print out and re-training for break connection
has been removed from the -mm tree. Its filename was
rapidio-add-rapidio-connection-info-print-out-and-re-training-for-break-connection.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: rapidio: add RapidIO connection info print out and re-training for break connection
From: Zhang Wei <wei.zhang@xxxxxxxxxxxxx>
Signed-off-by: Zhang Wei <wei.zhang@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/powerpc/sysdev/fsl_rio.c | 71 ++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff -puN arch/powerpc/sysdev/fsl_rio.c~rapidio-add-rapidio-connection-info-print-out-and-re-training-for-break-connection arch/powerpc/sysdev/fsl_rio.c
--- a/arch/powerpc/sysdev/fsl_rio.c~rapidio-add-rapidio-connection-info-print-out-and-re-training-for-break-connection
+++ a/arch/powerpc/sysdev/fsl_rio.c
@@ -942,6 +942,48 @@ static int fsl_rio_get_cmdline(char *s)
__setup("riohdid=", fsl_rio_get_cmdline);
+static inline void fsl_rio_info(struct device *dev, u32 ccsr)
+{
+ const char *str;
+ if (ccsr & 1) {
+ /* Serial phy */
+ switch (ccsr >> 30) {
+ case 0:
+ str = "1";
+ break;
+ case 1:
+ str = "4";
+ break;
+ default:
+ str = "Unknown";
+ break;;
+ }
+ dev_info(dev, "Hardware port width: %s\n", str);
+
+ switch ((ccsr >> 27) & 7) {
+ case 0:
+ str = "Single-lane 0";
+ break;
+ case 1:
+ str = "Single-lane 2";
+ break;
+ case 2:
+ str = "Four-lane";
+ break;
+ default:
+ str = "Unknown";
+ break;
+ }
+ dev_info(dev, "Training connection status: %s\n", str);
+ } else {
+ /* Parallel phy */
+ if (!(ccsr & 0x80000000))
+ dev_info(dev, "Output port operating in 8-bit mode\n");
+ if (!(ccsr & 0x08000000))
+ dev_info(dev, "Input port operating in 8-bit mode\n");
+ }
+}
+
/**
* fsl_rio_setup - Setup MPC85xx RapidIO interface
* @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
@@ -1055,6 +1097,35 @@ int fsl_rio_setup(struct of_device *dev)
(port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
"unknown"));
+ /* Checking the port training status */
+ if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
+ dev_err(&dev->dev, "Port is not ready. "
+ "Try to restart connection...\n");
+ switch (port->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Disable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0);
+ /* Set 1x lane */
+ setbits32(priv->regs_win + RIO_CCSR, 0x02000000);
+ /* Enable ports */
+ setbits32(priv->regs_win + RIO_CCSR, 0x00600000);
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Disable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0x22000000);
+ /* Enable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0x44000000);
+ break;
+ }
+ msleep(100);
+ if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
+ dev_err(&dev->dev, "Port restart failed.\n");
+ rc = -ENOLINK;
+ goto err;
+ }
+ dev_info(&dev->dev, "Port restart success!\n");
+ }
+ fsl_rio_info(&dev->dev, ccsr);
port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
& RIO_PEF_CTLS) >> 4;
_
Patches currently in -mm which might be from wei.zhang@xxxxxxxxxxxxx are
origin.patch
rapidio-add-memory-mapping-driver-to-rapidio.patch
rapidio-add-rapidio-space-allocation-bitmap-arithmetic.patch
rapidio-add-fsl-rapidio-controller-memory-ops-functions.patch
rapidio-add-the-rapidio-master-port-maintance-and-doorbell-window-to-space-resources.patch
rapidio-add-rapidio-proc-fs-for-memory-mapping-debugging.patch
rapidio-add-the-memory-mapping-support-in-rionet-driver.patch
rapidio-fix-docbook-references.patch
fsldma-the-mpc8377mds-board-device-tree-node-for-fsldma-driver.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
