The patch titled
aiptek.c: add support for Genius G-PEN 560 tablet (fwd)
has been removed from the -mm tree. Its filename was
aiptekc-add-support-for-genius-g-pen-560-tablet.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: aiptek.c: add support for Genius G-PEN 560 tablet (fwd)
From: Guryanov Dmitry <guryanov@xxxxxxxxxxxx>
Now this tablet works with usbhid driver in relative mode only, which is
useless for tablet. It works well with aiptek.c, so add its support to aiptek
driver.
Signed-off-by: Dmitry Guryanov <guryanov@xxxxxxxxxxxx>
Cc: Jiri Kosina <jkosina@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/hid/usbhid/hid-quirks.c | 4 ++++
drivers/input/tablet/Kconfig | 10 +++++-----
drivers/input/tablet/aiptek.c | 2 ++
3 files changed, 11 insertions(+), 5 deletions(-)
diff -puN drivers/hid/usbhid/hid-quirks.c~aiptekc-add-support-for-genius-g-pen-560-tablet drivers/hid/usbhid/hid-quirks.c
--- a/drivers/hid/usbhid/hid-quirks.c~aiptekc-add-support-for-genius-g-pen-560-tablet
+++ a/drivers/hid/usbhid/hid-quirks.c
@@ -405,6 +405,9 @@
#define USB_VENDOR_ID_YEALINK 0x6993
#define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K 0xb001
+#define USB_VENDOR_ID_KYE 0x0458
+#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -698,6 +701,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_63, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_64, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR, USB_DEVICE_ID_N_S_HARMONY, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560, HID_QUIRK_IGNORE },
{ 0, 0 }
};
diff -puN drivers/input/tablet/Kconfig~aiptekc-add-support-for-genius-g-pen-560-tablet drivers/input/tablet/Kconfig
--- a/drivers/input/tablet/Kconfig~aiptekc-add-support-for-genius-g-pen-560-tablet
+++ a/drivers/input/tablet/Kconfig
@@ -25,14 +25,14 @@ config TABLET_USB_ACECAD
module will be called acecad.
config TABLET_USB_AIPTEK
- tristate "Aiptek 6000U/8000U tablet support (USB)"
+ tristate "Aiptek 6000U/8000U and Genius G_PEN tablet support (USB)"
depends on USB_ARCH_HAS_HCD
select USB
help
- Say Y here if you want to use the USB version of the Aiptek 6000U
- or Aiptek 8000U tablet. Make sure to say Y to "Mouse support"
- (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
- (CONFIG_INPUT_EVDEV) as well.
+ Say Y here if you want to use the USB version of the Aiptek 6000U,
+ Aiptek 8000U or Genius G-PEN 560 tablet. Make sure to say Y to
+ "Mouse support" (CONFIG_INPUT_MOUSEDEV) and/or "Event interface
+ support" (CONFIG_INPUT_EVDEV) as well.
To compile this driver as a module, choose M here: the
module will be called aiptek.
diff -puN drivers/input/tablet/aiptek.c~aiptekc-add-support-for-genius-g-pen-560-tablet drivers/input/tablet/aiptek.c
--- a/drivers/input/tablet/aiptek.c~aiptekc-add-support-for-genius-g-pen-560-tablet
+++ a/drivers/input/tablet/aiptek.c
@@ -184,6 +184,7 @@
*/
#define USB_VENDOR_ID_AIPTEK 0x08ca
+#define USB_VENDOR_ID_KYE 0x0458
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
@@ -832,6 +833,7 @@ static const struct usb_device_id aiptek
{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+ {USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
{}
};
_
Patches currently in -mm which might be from guryanov@xxxxxxxxxxxx are
origin.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
