The patch titled
netdev: use non-racy method for proc entries creation
has been added to the -mm tree. Its filename is
netdev-use-non-racy-method-for-proc-entries-creation.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: netdev: use non-racy method for proc entries creation
From: "Denis V. Lunev" <den@xxxxxxxxxx>
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.
Signed-off-by: Denis V. Lunev <den@xxxxxxxxxx>
Cc: Jeff Garzik <jgarzik@xxxxxxxxx>
Cc: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Cc: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/net/bonding/bond_main.c | 9 +--
drivers/net/ibmveth.c | 9 +--
drivers/net/irda/vlsi_ir.c | 5 -
drivers/net/pppoe.c | 4 -
drivers/net/pppol2tp.c | 4 -
drivers/net/wireless/airo.c | 84 +++++++++++-------------------
6 files changed, 43 insertions(+), 72 deletions(-)
diff -puN drivers/net/bonding/bond_main.c~netdev-use-non-racy-method-for-proc-entries-creation drivers/net/bonding/bond_main.c
--- a/drivers/net/bonding/bond_main.c~netdev-use-non-racy-method-for-proc-entries-creation
+++ a/drivers/net/bonding/bond_main.c
@@ -3284,17 +3284,14 @@ static int bond_create_proc_entry(struct
struct net_device *bond_dev = bond->dev;
if (bond_proc_dir) {
- bond->proc_entry = create_proc_entry(bond_dev->name,
- S_IRUGO,
- bond_proc_dir);
+ bond->proc_entry = proc_create_data(bond_dev->name,
+ S_IRUGO, bond_proc_dir,
+ &bond_info_fops, bond);
if (bond->proc_entry == NULL) {
printk(KERN_WARNING DRV_NAME
": Warning: Cannot create /proc/net/%s/%s\n",
DRV_NAME, bond_dev->name);
} else {
- bond->proc_entry->data = bond;
- bond->proc_entry->proc_fops = &bond_info_fops;
- bond->proc_entry->owner = THIS_MODULE;
memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
}
}
diff -puN drivers/net/ibmveth.c~netdev-use-non-racy-method-for-proc-entries-creation drivers/net/ibmveth.c
--- a/drivers/net/ibmveth.c~netdev-use-non-racy-method-for-proc-entries-creation
+++ a/drivers/net/ibmveth.c
@@ -1303,13 +1303,10 @@ static void ibmveth_proc_register_adapte
if (ibmveth_proc_dir) {
char u_addr[10];
sprintf(u_addr, "%x", adapter->vdev->unit_address);
- entry = create_proc_entry(u_addr, S_IFREG, ibmveth_proc_dir);
- if (!entry) {
+ entry = proc_create_data(u_addr, S_IFREG, ibmveth_proc_dir,
+ &ibmveth_proc_fops, adapter);
+ if (!entry)
ibmveth_error_printk("Cannot create adapter proc entry");
- } else {
- entry->data = (void *) adapter;
- entry->proc_fops = &ibmveth_proc_fops;
- }
}
return;
}
diff -puN drivers/net/irda/vlsi_ir.c~netdev-use-non-racy-method-for-proc-entries-creation drivers/net/irda/vlsi_ir.c
--- a/drivers/net/irda/vlsi_ir.c~netdev-use-non-racy-method-for-proc-entries-creation
+++ a/drivers/net/irda/vlsi_ir.c
@@ -1674,13 +1674,12 @@ vlsi_irda_probe(struct pci_dev *pdev, co
if (vlsi_proc_root != NULL) {
struct proc_dir_entry *ent;
- ent = create_proc_entry(ndev->name, S_IFREG|S_IRUGO, vlsi_proc_root);
+ ent = proc_create_data(ndev->name, S_IFREG|S_IRUGO,
+ vlsi_proc_root, VLSI_PROC_FOPS, ndev);
if (!ent) {
IRDA_WARNING("%s: failed to create proc entry\n",
__FUNCTION__);
} else {
- ent->data = ndev;
- ent->proc_fops = VLSI_PROC_FOPS;
ent->size = 0;
}
idev->proc_entry = ent;
diff -puN drivers/net/pppoe.c~netdev-use-non-racy-method-for-proc-entries-creation drivers/net/pppoe.c
--- a/drivers/net/pppoe.c~netdev-use-non-racy-method-for-proc-entries-creation
+++ a/drivers/net/pppoe.c
@@ -1052,11 +1052,9 @@ static int __init pppoe_proc_init(void)
{
struct proc_dir_entry *p;
- p = create_proc_entry("pppoe", S_IRUGO, init_net.proc_net);
+ p = proc_net_fops_create(&init_net, "pppoe", S_IRUGO, &pppoe_seq_fops);
if (!p)
return -ENOMEM;
-
- p->proc_fops = &pppoe_seq_fops;
return 0;
}
#else /* CONFIG_PROC_FS */
diff -puN drivers/net/pppol2tp.c~netdev-use-non-racy-method-for-proc-entries-creation drivers/net/pppol2tp.c
--- a/drivers/net/pppol2tp.c~netdev-use-non-racy-method-for-proc-entries-creation
+++ a/drivers/net/pppol2tp.c
@@ -2469,12 +2469,12 @@ static int __init pppol2tp_init(void)
goto out_unregister_pppol2tp_proto;
#ifdef CONFIG_PROC_FS
- pppol2tp_proc = create_proc_entry("pppol2tp", 0, init_net.proc_net);
+ pppol2tp_proc = proc_net_fops_create(&init_net, "pppol2tp", 0,
+ &pppol2tp_proc_fops);
if (!pppol2tp_proc) {
err = -ENOMEM;
goto out_unregister_pppox_proto;
}
- pppol2tp_proc->proc_fops = &pppol2tp_proc_fops;
#endif /* CONFIG_PROC_FS */
printk(KERN_INFO "PPPoL2TP kernel driver, %s\n",
PPPOL2TP_DRV_VERSION);
diff -puN drivers/net/wireless/airo.c~netdev-use-non-racy-method-for-proc-entries-creation drivers/net/wireless/airo.c
--- a/drivers/net/wireless/airo.c~netdev-use-non-racy-method-for-proc-entries-creation
+++ a/drivers/net/wireless/airo.c
@@ -4347,24 +4347,28 @@ static int proc_config_open( struct inod
static int proc_wepkey_open( struct inode *inode, struct file *file );
static const struct file_operations proc_statsdelta_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.open = proc_statsdelta_open,
.release = proc_close
};
static const struct file_operations proc_stats_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.open = proc_stats_open,
.release = proc_close
};
static const struct file_operations proc_status_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.open = proc_status_open,
.release = proc_close
};
static const struct file_operations proc_SSID_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.write = proc_write,
.open = proc_SSID_open,
@@ -4372,6 +4376,7 @@ static const struct file_operations proc
};
static const struct file_operations proc_BSSList_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.write = proc_write,
.open = proc_BSSList_open,
@@ -4379,6 +4384,7 @@ static const struct file_operations proc
};
static const struct file_operations proc_APList_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.write = proc_write,
.open = proc_APList_open,
@@ -4386,6 +4392,7 @@ static const struct file_operations proc
};
static const struct file_operations proc_config_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.write = proc_write,
.open = proc_config_open,
@@ -4393,6 +4400,7 @@ static const struct file_operations proc
};
static const struct file_operations proc_wepkey_ops = {
+ .owner = THIS_MODULE,
.read = proc_read,
.write = proc_write,
.open = proc_wepkey_open,
@@ -4411,10 +4419,6 @@ struct proc_data {
void (*on_close) (struct inode *, struct file *);
};
-#ifndef SETPROC_OPS
-#define SETPROC_OPS(entry, ops) (entry)->proc_fops = &(ops)
-#endif
-
static int setup_proc_entry( struct net_device *dev,
struct airo_info *apriv ) {
struct proc_dir_entry *entry;
@@ -4430,100 +4434,76 @@ static int setup_proc_entry( struct net_
apriv->proc_entry->owner = THIS_MODULE;
/* Setup the StatsDelta */
- entry = create_proc_entry("StatsDelta",
- S_IFREG | (S_IRUGO&proc_perm),
- apriv->proc_entry);
+ entry = proc_create_data("StatsDelta",
+ S_IFREG | (S_IRUGO&proc_perm),
+ apriv->proc_entry, &proc_statsdelta_ops, dev);
if (!entry)
goto fail_stats_delta;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_statsdelta_ops);
/* Setup the Stats */
- entry = create_proc_entry("Stats",
- S_IFREG | (S_IRUGO&proc_perm),
- apriv->proc_entry);
+ entry = proc_create_data("Stats",
+ S_IFREG | (S_IRUGO&proc_perm),
+ apriv->proc_entry, &proc_stats_ops, dev);
if (!entry)
goto fail_stats;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_stats_ops);
/* Setup the Status */
- entry = create_proc_entry("Status",
- S_IFREG | (S_IRUGO&proc_perm),
- apriv->proc_entry);
+ entry = proc_create_data("Status",
+ S_IFREG | (S_IRUGO&proc_perm),
+ apriv->proc_entry, &proc_status_ops, dev);
if (!entry)
goto fail_status;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_status_ops);
/* Setup the Config */
- entry = create_proc_entry("Config",
- S_IFREG | proc_perm,
- apriv->proc_entry);
+ entry = proc_create_data("Config",
+ S_IFREG | proc_perm,
+ apriv->proc_entry, &proc_config_ops, dev);
if (!entry)
goto fail_config;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_config_ops);
/* Setup the SSID */
- entry = create_proc_entry("SSID",
- S_IFREG | proc_perm,
- apriv->proc_entry);
+ entry = proc_create_data("SSID",
+ S_IFREG | proc_perm,
+ apriv->proc_entry, &proc_SSID_ops, dev);
if (!entry)
goto fail_ssid;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_SSID_ops);
/* Setup the APList */
- entry = create_proc_entry("APList",
- S_IFREG | proc_perm,
- apriv->proc_entry);
+ entry = proc_create_data("APList",
+ S_IFREG | proc_perm,
+ apriv->proc_entry, &proc_APList_ops, dev);
if (!entry)
goto fail_aplist;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_APList_ops);
/* Setup the BSSList */
- entry = create_proc_entry("BSSList",
- S_IFREG | proc_perm,
- apriv->proc_entry);
+ entry = proc_create_data("BSSList",
+ S_IFREG | proc_perm,
+ apriv->proc_entry, &proc_BSSList_ops, dev);
if (!entry)
goto fail_bsslist;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_BSSList_ops);
/* Setup the WepKey */
- entry = create_proc_entry("WepKey",
- S_IFREG | proc_perm,
- apriv->proc_entry);
+ entry = proc_create_data("WepKey",
+ S_IFREG | proc_perm,
+ apriv->proc_entry, &proc_wepkey_ops, dev);
if (!entry)
goto fail_wepkey;
entry->uid = proc_uid;
entry->gid = proc_gid;
- entry->data = dev;
- entry->owner = THIS_MODULE;
- SETPROC_OPS(entry, proc_wepkey_ops);
return 0;
_
Patches currently in -mm which might be from den@xxxxxxxxxx are
git-net.patch
proc-introduce-proc_create_data-to-setup-de-data.patch
nfsd-use-proc_create-to-setup-de-proc_fops.patch
nfs-use-proc_create-to-setup-de-proc_fops.patch
afs-use-non-racy-method-for-proc-entries-creation.patch
ext4-use-non-racy-method-for-proc-entries-creation.patch
reiserfs-use-non-racy-method-for-proc-entries-creation.patch
jbd2-use-non-racy-method-for-proc-entries-creation.patch
sysvipc-use-non-racy-method-for-proc-entries-creation.patch
mm-use-non-racy-method-for-proc-swaps-creation.patch
sound-use-non-racy-method-for-proc-driver-snd-page-alloc-creation.patch
zorro-use-non-racy-method-for-proc-entries-creation.patch
samples-use-non-racy-method-for-proc-marker-example-creation.patch
scsi-use-non-racy-method-for-proc-entries-creation.patch
usb-use-non-racy-method-for-proc-entries-creation.patch
s390-use-non-racy-method-for-proc-entries-creation.patch
arm-use-non-racy-method-for-proc-davinci_clocks-creation.patch
avr32-proc-use-non-racy-method-for-proc-tlb-creation.patch
cris-use-non-racy-method-for-proc-system_profile-creation.patch
ia64-use-non-racy-method-for-proc-entries-creation.patch
parisc-use-non-racy-method-for-proc-pcxl_dma-creation.patch
powerpc-use-non-racy-method-for-proc-entries-creation.patch
acpi-use-non-racy-method-for-proc-entries-creation.patch
netdev-use-non-racy-method-for-proc-entries-creation.patch
isdn-use-non-racy-method-for-proc-entries-creation.patch
kernel-use-non-racy-method-for-proc-entries-creation.patch
parisc-use-non-racy-method-for-proc-entries-creation.patch
drivers-use-non-racy-method-for-proc-entries-creation.patch
drivers-use-non-racy-method-for-proc-entries-creation-2.patch
sysctl-merge-equal-proc_sys_read-and-proc_sys_write.patch
sysctl-clean-from-unneeded-extern-and-forward-declarations.patch
sysctl-add-the-permissions-callback-on-the-ctl_table_root.patch
proc-use-non-racy-method-for-proc-page_owner-creation-page_owner.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
