The patch titled regulator: kbuild has been added to the -mm tree. Its filename is regulator-kbuild.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: regulator: kbuild From: Liam Girdwood <lg@xxxxxxxxxxxxxxxxxxxxxxxxxxx> This patch adds Makefile and Kconfig for regulator core. Signed-off-by: Liam Girdwood <lg@xxxxxxxxxxxxxxxxxxxxxxxxxxx> Cc: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/Kconfig | 2 ++ drivers/Makefile | 1 + drivers/regulator/Kconfig | 32 ++++++++++++++++++++++++++++++++ drivers/regulator/Makefile | 7 +++++++ 4 files changed, 42 insertions(+) diff -puN drivers/Kconfig~regulator-kbuild drivers/Kconfig --- a/drivers/Kconfig~regulator-kbuild +++ a/drivers/Kconfig @@ -92,6 +92,8 @@ source "drivers/edac/Kconfig" source "drivers/rtc/Kconfig" +source "drivers/regulator/Kconfig" + source "drivers/dma/Kconfig" source "drivers/dca/Kconfig" diff -puN drivers/Makefile~regulator-kbuild drivers/Makefile --- a/drivers/Makefile~regulator-kbuild +++ a/drivers/Makefile @@ -87,6 +87,7 @@ obj-y += firmware/ obj-$(CONFIG_CRYPTO) += crypto/ obj-$(CONFIG_SUPERH) += sh/ obj-$(CONFIG_GENERIC_TIME) += clocksource/ +obj-$(CONFIG_REGULATOR) += regulator/ obj-$(CONFIG_DMA_ENGINE) += dma/ obj-$(CONFIG_DCA) += dca/ obj-$(CONFIG_HID) += hid/ diff -puN /dev/null drivers/regulator/Kconfig --- /dev/null +++ a/drivers/regulator/Kconfig @@ -0,0 +1,32 @@ +menu "Voltage and Current regulators" + +config REGULATOR + bool "Voltage and Current Regulator Support" + default n + help + Generic Voltage and Current Regulator support. + + This framework is designed to provide a generic interface to voltage + and current regulators within the Linux kernel. It's intended to + provide voltage and current control to client or consumer drivers and + also provide status information to user space applications through a + sysfs interface. + + The intention is to allow systems to dynamically control regulator + output in order to save power and prolong battery life. This applies + to both voltage regulators (where voltage output is controllable) and + current sinks (where current output is controllable). + + This framework safely compiles out if not selected so that client + drivers can still be used in systems with no software controllable + regulators. + + If unsure, say no. + +config REGULATOR_DEBUG + bool "Regulator debug support" + depends on REGULATOR + help + Say yes here to enable debugging support. + +endmenu diff -puN /dev/null drivers/regulator/Makefile --- /dev/null +++ a/drivers/regulator/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for regulator drivers. +# + +obj-$(CONFIG_REGULATOR) += reg-core.o + +ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG _ Patches currently in -mm which might be from lg@xxxxxxxxxxxxxxxxxxxxxxxxxxx are regulator-consumer-interface.patch regulator-regulator-driver-interface.patch regulator-platform-interface.patch regulator-framework-core.patch regulator-sysfs-abi.patch regulator-kbuild.patch regulator-maintainers.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html