The patch titled
mxser: prepare for BKL pushdown
has been added to the -mm tree. Its filename is
mxser-prepare-for-bkl-pushdown.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: mxser: prepare for BKL pushdown
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Push the BKL down into various internal routines in the driver ready to
remove it from the break, ioctl and other call points.
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Jiri Slaby <jirislaby@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/char/mxser.c | 63 ++++++++++++++++++++++++-----------------
1 file changed, 38 insertions(+), 25 deletions(-)
diff -puN drivers/char/mxser.c~mxser-prepare-for-bkl-pushdown drivers/char/mxser.c
--- a/drivers/char/mxser.c~mxser-prepare-for-bkl-pushdown
+++ a/drivers/char/mxser.c
@@ -1460,6 +1460,7 @@ static int mxser_ioctl_special(unsigned
struct mxser_port *port;
int result, status;
unsigned int i, j;
+ int ret = 0;
switch (cmd) {
case MOXA_GET_MAJOR:
@@ -1467,18 +1468,21 @@ static int mxser_ioctl_special(unsigned
case MOXA_CHKPORTENABLE:
result = 0;
-
+ lock_kernel();
for (i = 0; i < MXSER_BOARDS; i++)
for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
if (mxser_boards[i].ports[j].ioaddr)
result |= (1 << i);
-
+ unlock_kernel();
return put_user(result, (unsigned long __user *)argp);
case MOXA_GETDATACOUNT:
+ lock_kernel();
if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ unlock_kernel();
+ return ret;
case MOXA_GETMSTATUS:
+ lock_kernel();
for (i = 0; i < MXSER_BOARDS; i++)
for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
port = &mxser_boards[i].ports[j];
@@ -1515,6 +1519,7 @@ static int mxser_ioctl_special(unsigned
else
GMStatus[i].cts = 0;
}
+ unlock_kernel();
if (copy_to_user(argp, GMStatus,
sizeof(struct mxser_mstatus) * MXSER_PORTS))
return -EFAULT;
@@ -1524,7 +1529,8 @@ static int mxser_ioctl_special(unsigned
unsigned long opmode;
unsigned cflag, iflag;
- for (i = 0; i < MXSER_BOARDS; i++)
+ lock_kernel();
+ for (i = 0; i < MXSER_BOARDS; i++) {
for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
port = &mxser_boards[i].ports[j];
if (!port->ioaddr)
@@ -1589,13 +1595,14 @@ static int mxser_ioctl_special(unsigned
mon_data_ext.iftype[i] = opmode;
}
- if (copy_to_user(argp, &mon_data_ext,
- sizeof(mon_data_ext)))
- return -EFAULT;
-
- return 0;
-
- } default:
+ }
+ unlock_kernel();
+ if (copy_to_user(argp, &mon_data_ext,
+ sizeof(mon_data_ext)))
+ return -EFAULT;
+ return 0;
+ }
+ default:
return -ENOIOCTLCMD;
}
return 0;
@@ -1651,16 +1658,20 @@ static int mxser_ioctl(struct tty_struct
opmode != RS422_MODE &&
opmode != RS485_4WIRE_MODE)
return -EFAULT;
+ lock_kernel();
mask = ModeMask[p];
shiftbit = p * 2;
val = inb(info->opmode_ioaddr);
val &= mask;
val |= (opmode << shiftbit);
outb(val, info->opmode_ioaddr);
+ unlock_kernel();
} else {
+ lock_kernel();
shiftbit = p * 2;
opmode = inb(info->opmode_ioaddr) >> shiftbit;
opmode &= OP_MODE_MASK;
+ unlock_kernel();
if (put_user(opmode, (int __user *)argp))
return -EFAULT;
}
@@ -1687,19 +1698,18 @@ static int mxser_ioctl(struct tty_struct
tty_wait_until_sent(tty, 0);
mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
return 0;
- case TIOCGSOFTCAR:
- return put_user(!!C_CLOCAL(tty), (unsigned long __user *)argp);
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned long __user *)argp))
- return -EFAULT;
- tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
- return 0;
case TIOCGSERIAL:
- return mxser_get_serial_info(info, argp);
+ lock_kernel();
+ retval = mxser_get_serial_info(info, argp);
+ unlock_kernel();
+ return retval;
case TIOCSSERIAL:
- return mxser_set_serial_info(info, argp);
+ lock_kernel();
+ retval = mxser_set_serial_info(info, argp);
+ unlock_kernel();
+ return retval;
case TIOCSERGETLSR: /* Get line status register */
- return mxser_get_lsr_info(info, argp);
+ return mxser_get_lsr_info(info, argp);
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
@@ -1746,24 +1756,27 @@ static int mxser_ioctl(struct tty_struct
case MOXA_HighSpeedOn:
return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
case MOXA_SDS_RSTICOUNTER:
+ lock_kernel();
info->mon_data.rxcnt = 0;
info->mon_data.txcnt = 0;
+ unlock_kernel();
return 0;
case MOXA_ASPP_OQUEUE:{
int len, lsr;
+ lock_kernel();
len = mxser_chars_in_buffer(tty);
-
lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
-
len += (lsr ? 0 : 1);
+ unlock_kernel();
return put_user(len, (int __user *)argp);
}
case MOXA_ASPP_MON: {
int mcr, status;
+ lock_kernel();
status = mxser_get_msr(info->ioaddr, 1, tty->index);
mxser_check_modem_status(info, status);
@@ -1782,7 +1795,7 @@ static int mxser_ioctl(struct tty_struct
info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
else
info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
-
+ unlock_kernel();
if (copy_to_user(argp, &info->mon_data,
sizeof(struct mxser_mon)))
return -EFAULT;
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
libata-isolate-and-rework-cable-logic.patch
pata_amd-fix-sparse-warning.patch
8390-split-8390-support-into-a-pausing-and-a-non-pausing-driver-core.patch
parisc-new-termios-definitions.patch
megaraid-outb_p-extermination.patch
usb-serial-prepare-for-bkl-push-down.patch
ftdi_sio-note-missing-locking.patch
usb-serial-note-mos7480-and-option-dont-lock-modem-status.patch
io_ti-lock-mcr-and-msr-shadows-properly.patch
iuu_phoenix-lock-priv-tiostatus-properly.patch
kobil_sct-get-rid-of-unneeded-priv-line_state.patch
ti_usb_3410_5052-extend-locking-to-msr-and-shadow-mcr.patch
git-watchdog.patch
crisv10-prepare-for-bkl-push-down.patch
fix-tty-speed-handling-on-8250.patch
uart_get_baud_rate-stop-mangling-termios.patch
do_task_stat-dont-take-rcu_read_lock.patch
amiserial-prepare-for-locking-relaxation-in-caller.patch
cyclades-prepare-for-relaxed-locking-in-callers.patch
epca-lock_kernel-push-down.patch
esp-lock_kernel-push-down.patch
isicom-prepare-for-lock_kernel-push-down.patch
isicom-istallion-prepare-for-lock_kernel-pushdown.patch
mxser-prepare-for-bkl-pushdown.patch
nozomi-prepare-for-bkl-pushdown.patch
riscom8-prepare-for-bkl-pushdown.patch
rocket-prepare-for-bkl-pushdown.patch
serial167-prepare-to-push-bkl-down-into-drivers.patch
specialix-prepare-for-bkl-pushdown.patch
stallion-prepare-for-bkl-push-down.patch
sx-prepare-for-bkl-pushdown.patch
synclink-series-prepare-for-bkl-pushdown.patch
viocons-bkl-locking.patch
vt_ioctl-prepare-for-bkl-push-down.patch
isdn_tty-prepare-for-bkl-push-down.patch
68360serial-note-that-there-isnt-any-info-mcr-locking.patch
serial_core-prepare-for-bkl-push-down.patch
tty-bkl-pushdown.patch
tty-bkl-pushdown-fix1.patch
redo-locking-of-tty-pgrp.patch
put_pid-make-sure-we-dont-free-the-live-pid.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
