The patch titled isdn: HiSax niccy: convert to modern ISA/PNP/PCI probing has been removed from the -mm tree. Its filename was isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing.patch This patch was dropped because it had testing failures The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: isdn: HiSax niccy: convert to modern ISA/PNP/PCI probing From: Jeff Garzik <jeff@xxxxxxxxxx> Signed-off-by: Jeff Garzik <jeff@xxxxxxxxxx> Cc: Greg KH <greg@xxxxxxxxx> Cc: Karsten Keil <kkeil@xxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/isdn/hisax/Kconfig | 3 drivers/isdn/hisax/Makefile | 2 drivers/isdn/hisax/config.c | 26 - drivers/isdn/hisax/niccy.c | 458 ++++++++++++++++++++++++---------- 4 files changed, 333 insertions(+), 156 deletions(-) diff -puN drivers/isdn/hisax/Kconfig~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing drivers/isdn/hisax/Kconfig --- a/drivers/isdn/hisax/Kconfig~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing +++ a/drivers/isdn/hisax/Kconfig @@ -257,7 +257,8 @@ config HISAX_NETJET_U settings. config HISAX_NICCY - bool "Niccy PnP/PCI card" + tristate "Niccy PnP/PCI card" + depends on (ISA || PCI) help This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI. diff -puN drivers/isdn/hisax/Makefile~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing drivers/isdn/hisax/Makefile --- a/drivers/isdn/hisax/Makefile~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing +++ a/drivers/isdn/hisax/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_HISAX_NETJET_U) += netjet_ obj-$(CONFIG_HISAX_TELESPCI) += telespci.o libhisax.o obj-$(CONFIG_HISAX_FRITZPCI) += avm_pci.o libhisax.o obj-$(CONFIG_HISAX_GAZEL) += gazel.o libhisax.o +obj-$(CONFIG_HISAX_NICCY) += niccy.o libhisax.o bkm_a4t_pci-objs := bkm_a4t.o jade.o enternow-objs := enternow_pci.o amd7930_fn.o @@ -61,7 +62,6 @@ hisax-$(CONFIG_HISAX_SPORTSTER) += spor hisax-$(CONFIG_HISAX_MIC) += mic.o hisax-$(CONFIG_HISAX_HFCS) += hfcscard.o hfc_2bds0.o hisax-$(CONFIG_HISAX_HFC_SX) += hfc_sx.o -hisax-$(CONFIG_HISAX_NICCY) += niccy.o hisax-$(CONFIG_HISAX_ISURF) += isurf.o isar.o hisax-$(CONFIG_HISAX_HSTSAPHIR) += saphir.o hisax-$(CONFIG_HISAX_SCT_QUADRO) += bkm_a8.o diff -puN drivers/isdn/hisax/config.c~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing drivers/isdn/hisax/config.c --- a/drivers/isdn/hisax/config.c~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing +++ a/drivers/isdn/hisax/config.c @@ -201,13 +201,6 @@ const char *CardType[] = { #define DEFAULT_CFG {5,0x2E0,0,0} #endif -#ifdef CONFIG_HISAX_NICCY -#undef DEFAULT_CARD -#undef DEFAULT_CFG -#define DEFAULT_CARD ISDN_CTYPE_NICCY -#define DEFAULT_CFG {0,0x0,0,0} -#endif - #ifdef CONFIG_HISAX_ISURF #undef DEFAULT_CARD #undef DEFAULT_CFG @@ -258,10 +251,6 @@ static int io[HISAX_MAX_CARDS] = { 0, }; #ifdef CONFIG_HISAX_16_3 #define IO0_IO1 #endif -#ifdef CONFIG_HISAX_NICCY -#undef IO0_IO1 -#define IO0_IO1 -#endif #ifdef IO0_IO1 static int io0[HISAX_MAX_CARDS] __devinitdata = { 0, }; static int io1[HISAX_MAX_CARDS] __devinitdata = { 0, }; @@ -447,10 +436,6 @@ extern int setup_hfcs(struct IsdnCard *c extern int setup_hfcsx(struct IsdnCard *card); #endif -#if CARD_NICCY -extern int setup_niccy(struct IsdnCard *card); -#endif - #if CARD_ISURF extern int setup_isurf(struct IsdnCard *card); #endif @@ -827,11 +812,6 @@ static int __devinit hisax_cs_setup_card ret = setup_hfcsx(card); break; #endif -#if CARD_NICCY - case ISDN_CTYPE_NICCY: - ret = setup_niccy(card); - break; -#endif #if CARD_ISURF case ISDN_CTYPE_ISURF: ret = setup_isurf(card); @@ -860,6 +840,7 @@ static int __devinit hisax_cs_setup_card case ISDN_CTYPE_TELESPCI: case ISDN_CTYPE_FRITZPCI: case ISDN_CTYPE_GAZEL: + case ISDN_CTYPE_NICCY: printk(KERN_WARNING "HiSax: Support for %s Card has moved " "to separate PCI driver module\n", CardType[card->typ]); @@ -1273,7 +1254,6 @@ static int __init HiSax_init(void) #ifdef IO0_IO1 case ISDN_CTYPE_PNP: - case ISDN_CTYPE_NICCY: cards[j].para[0] = irq[i]; cards[j].para[1] = io0[i]; cards[j].para[2] = io1[i]; @@ -1330,6 +1310,7 @@ static int __init HiSax_init(void) case ISDN_CTYPE_TELESPCI: case ISDN_CTYPE_FRITZPCI: case ISDN_CTYPE_GAZEL: + case ISDN_CTYPE_NICCY: break; case ISDN_CTYPE_SCT_QUADRO: @@ -1818,9 +1799,6 @@ static struct pci_device_id hisax_pci_tb #ifdef CONFIG_HISAX_SCT_QUADRO {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_ANY_ID, PCI_ANY_ID}, #endif -#ifdef CONFIG_HISAX_NICCY - {PCI_VENDOR_ID_SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY, PCI_ANY_ID,PCI_ANY_ID}, -#endif #ifdef CONFIG_HISAX_SEDLBAUER {PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100, PCI_ANY_ID,PCI_ANY_ID}, #endif diff -puN drivers/isdn/hisax/niccy.c~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing drivers/isdn/hisax/niccy.c --- a/drivers/isdn/hisax/niccy.c~isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing +++ a/drivers/isdn/hisax/niccy.c @@ -15,11 +15,21 @@ #include <linux/init.h> #include "hisax.h" +#include "hisax_proto.h" #include "isac.h" #include "hscx.h" #include "isdnl1.h" #include <linux/pci.h> -#include <linux/isapnp.h> +#include <linux/pnp.h> +#include <linux/isa.h> + +static int niccy_protocol; /* 0 == use DEFAULT_PROTO */ + +#ifdef CONFIG_ISA +static int niccy_base0; +static int niccy_base1; +static int niccy_irq; +#endif /* CONFIG_ISA */ static const char *niccy_revision = "$Revision: 1.21.2.4 $"; @@ -222,142 +232,18 @@ static int niccy_card_msg(struct IsdnCar return 0; } -#ifdef __ISAPNP__ -static struct pnp_card *pnp_c __devinitdata = NULL; -#endif - -int __devinit setup_niccy(struct IsdnCard *card) +static int __devinit setup_niccy(struct IsdnCard *card) { struct IsdnCardState *cs = card->cs; char tmp[64]; strcpy(tmp, niccy_revision); printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp)); - if (cs->typ != ISDN_CTYPE_NICCY) - return 0; -#ifdef __ISAPNP__ - if (!card->para[1] && isapnp_present()) { - struct pnp_dev *pnp_d = NULL; - int err; - - pnp_c = pnp_find_card(ISAPNP_VENDOR('S', 'D', 'A'), - ISAPNP_FUNCTION(0x0150), pnp_c); - if (pnp_c) { - pnp_d = pnp_find_dev(pnp_c, - ISAPNP_VENDOR('S', 'D', 'A'), - ISAPNP_FUNCTION(0x0150), pnp_d); - if (!pnp_d) { - printk(KERN_ERR "NiccyPnP: PnP error card " - "found, no device\n"); - return 0; - } - pnp_disable_dev(pnp_d); - err = pnp_activate_dev(pnp_d); - if (err < 0) { - printk(KERN_WARNING "%s: pnp_activate_dev " - "ret(%d)\n", __FUNCTION__, err); - return 0; - } - card->para[1] = pnp_port_start(pnp_d, 0); - card->para[2] = pnp_port_start(pnp_d, 1); - card->para[0] = pnp_irq(pnp_d, 0); - if (!card->para[0] || !card->para[1] || - !card->para[2]) { - printk(KERN_ERR "NiccyPnP:some resources are " - "missing %ld/%lx/%lx\n", - card->para[0], card->para[1], - card->para[2]); - pnp_disable_dev(pnp_d); - return 0; - } - } else - printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n"); - } -#endif - if (card->para[1]) { - cs->hw.niccy.isac = card->para[1] + ISAC_PNP; - cs->hw.niccy.hscx = card->para[1] + HSCX_PNP; - cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP; - cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP; - cs->hw.niccy.cfg_reg = 0; - cs->subtyp = NICCY_PNP; - cs->irq = card->para[0]; - if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) { - printk(KERN_WARNING "HiSax: NICCY data port %x-%x " - "already in use\n", - cs->hw.niccy.isac, cs->hw.niccy.isac + 1); - return 0; - } - if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) { - printk(KERN_WARNING "HiSax: NICCY address port %x-%x " - "already in use\n", - cs->hw.niccy.isac_ale, - cs->hw.niccy.isac_ale + 1); - release_region(cs->hw.niccy.isac, 2); - return 0; - } - } else { -#ifdef CONFIG_PCI_LEGACY - static struct pci_dev *niccy_dev __devinitdata; - u_int pci_ioaddr; - cs->subtyp = 0; - if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM, - PCI_DEVICE_ID_SATSAGEM_NICCY, - niccy_dev))) { - if (pci_enable_device(niccy_dev)) - return 0; - /* get IRQ */ - if (!niccy_dev->irq) { - printk(KERN_WARNING - "Niccy: No IRQ for PCI card found\n"); - return 0; - } - cs->irq = niccy_dev->irq; - cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0); - if (!cs->hw.niccy.cfg_reg) { - printk(KERN_WARNING - "Niccy: No IO-Adr for PCI cfg found\n"); - return 0; - } - pci_ioaddr = pci_resource_start(niccy_dev, 1); - if (!pci_ioaddr) { - printk(KERN_WARNING - "Niccy: No IO-Adr for PCI card found\n"); - return 0; - } - cs->subtyp = NICCY_PCI; - } else { - printk(KERN_WARNING "Niccy: No PCI card found\n"); - return 0; - } - cs->irq_flags |= IRQF_SHARED; - cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA; - cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR; - cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA; - cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR; - if (!request_region(cs->hw.niccy.isac, 4, "niccy")) { - printk(KERN_WARNING - "HiSax: NICCY data port %x-%x already in use\n", - cs->hw.niccy.isac, cs->hw.niccy.isac + 4); - return 0; - } - if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) { - printk(KERN_WARNING - "HiSax: NICCY pci port %x-%x already in use\n", - cs->hw.niccy.cfg_reg, - cs->hw.niccy.cfg_reg + 0x40); - release_region(cs->hw.niccy.isac, 4); - return 0; - } -#else - printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n"); - printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n"); - return 0; -#endif /* CONFIG_PCI_LEGACY */ - } - printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n", - (cs->subtyp == 1) ? "PnP" : "PCI", + WARN_ON(cs->typ != ISDN_CTYPE_NICCY); + + printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n", + "niccy", (cs->subtyp == 1) ? "PnP" : "PCI", cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale); setup_isac(cs); cs->readisac = &ReadISAC; @@ -378,3 +264,315 @@ int __devinit setup_niccy(struct IsdnCar } return 1; } + +#ifdef CONFIG_ISA + +static int __devinit niccy_isa_setup(struct IsdnCard *card) +{ + struct IsdnCardState *cs = card->cs; + + cs->hw.niccy.isac = card->para[1] + ISAC_PNP; + cs->hw.niccy.hscx = card->para[1] + HSCX_PNP; + cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP; + cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP; + cs->hw.niccy.cfg_reg = 0; + cs->subtyp = NICCY_PNP; + cs->irq = card->para[0]; + if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) { + printk(KERN_WARNING "HiSax: %s data port %x-%x " + "already in use\n", "niccy", + cs->hw.niccy.isac, cs->hw.niccy.isac + 1); + return 0; + } + if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) { + printk(KERN_WARNING "HiSax: %s address port %x-%x " + "already in use\n", "niccy", + cs->hw.niccy.isac_ale, + cs->hw.niccy.isac_ale + 1); + release_region(cs->hw.niccy.isac, 2); + return 0; + } + + return setup_niccy(card); +} + +static int __devinit niccy_isa_init_one(struct device *dev, unsigned int id) +{ + struct IsdnCard icard = { ISDN_CTYPE_NICCY, }; + int cardnr; + + icard.para[0] = niccy_irq; + icard.para[1] = niccy_base0; + icard.para[2] = niccy_base1; + if (!niccy_protocol) + icard.protocol = DEFAULT_PROTO; + else + icard.protocol = niccy_protocol; + + cardnr = hisax_init_hotplug(&icard, niccy_isa_setup); + if (cardnr < 0) + return -ENODEV; + + dev_set_drvdata(dev, (void *)(unsigned long) cardnr); + return 0; +} + +static int __devexit niccy_isa_remove_one(struct device *dev, unsigned int id) +{ + int cardnr = (unsigned long) dev_get_drvdata(dev); + + HiSax_closecard(cardnr); + return 0; +} + +static struct isa_driver niccy_isa_driver = { + .probe = niccy_isa_init_one, + .remove = __devexit_p(niccy_isa_remove_one), + .driver = { + .owner = THIS_MODULE, + .name = "niccy_pci", + }, +}; + +#ifdef CONFIG_PNP + +static int __devinit niccy_pnp_setup(struct IsdnCard *card) +{ + struct pnp_dev *pnp_d = (void *) card->para[0]; + int err; + + pnp_disable_dev(pnp_d); + err = pnp_activate_dev(pnp_d); + if (err < 0) { + printk(KERN_WARNING "%s: pnp_activate_dev " + "ret(%d)\n", __FUNCTION__, err); + return 0; + } + card->para[1] = pnp_port_start(pnp_d, 0); + card->para[2] = pnp_port_start(pnp_d, 1); + card->para[0] = pnp_irq(pnp_d, 0); + if (!card->para[0] || !card->para[1] || + !card->para[2]) { + printk(KERN_ERR "NiccyPnP:some resources are " + "missing %ld/%lx/%lx\n", + card->para[0], card->para[1], + card->para[2]); + pnp_disable_dev(pnp_d); + return 0; + } + + return niccy_isa_setup(card); +} + +static int __devinit niccy_pnp_init_one(struct pnp_dev *pdev, + const struct pnp_device_id *dev_id) +{ + struct IsdnCard icard = { ISDN_CTYPE_NICCY, }; + int cardnr; + + icard.para[0] = (unsigned long) pdev; + if (!niccy_protocol) + icard.protocol = DEFAULT_PROTO; + else + icard.protocol = niccy_protocol; + + cardnr = hisax_init_hotplug(&icard, niccy_pnp_setup); + if (cardnr < 0) + return -ENODEV; + + pnp_set_drvdata(pdev, (void *)(unsigned long) cardnr); + return 0; +} + +static void __devexit niccy_pnp_remove_one(struct pnp_dev *pdev) +{ + int cardnr = (unsigned long) pnp_get_drvdata(pdev); + + HiSax_closecard(cardnr); +} + +static struct pnp_device_id niccy_pnp_table[] = { + { .id = "SDA0150", }, + + { .id = "" } /* terminate list */ +}; + +static struct pnp_driver niccy_pnp_driver = { + .name = "niccy", + .id_table = niccy_pnp_table, + .probe = niccy_pnp_init_one, + .remove = __devexit_p(niccy_pnp_remove_one), +}; +#endif /* CONFIG_PNP */ +#endif /* CONFIG_ISA */ + +#ifdef CONFIG_PCI + +static int __devinit niccy_pci_setup(struct IsdnCard *card) +{ + u_int pci_ioaddr; + struct pci_dev *niccy_dev = (void *) card->para[0]; + struct IsdnCardState *cs = card->cs; + + cs->subtyp = 0; + if (pci_enable_device(niccy_dev)) + return 0; + /* get IRQ */ + if (!niccy_dev->irq) { + printk(KERN_WARNING + "Niccy: No IRQ for PCI card found\n"); + return 0; + } + cs->irq = niccy_dev->irq; + cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0); + if (!cs->hw.niccy.cfg_reg) { + printk(KERN_WARNING + "Niccy: No IO-Adr for PCI cfg found\n"); + return 0; + } + pci_ioaddr = pci_resource_start(niccy_dev, 1); + if (!pci_ioaddr) { + printk(KERN_WARNING + "Niccy: No IO-Adr for PCI card found\n"); + return 0; + } + cs->subtyp = NICCY_PCI; + cs->irq_flags |= IRQF_SHARED; + cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA; + cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR; + cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA; + cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR; + if (!request_region(cs->hw.niccy.isac, 4, "niccy")) { + printk(KERN_WARNING + "HiSax: %s data port %x-%x already in use\n", + "niccy", + cs->hw.niccy.isac, cs->hw.niccy.isac + 4); + return 0; + } + if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) { + printk(KERN_WARNING + "HiSax: %s pci port %x-%x already in use\n", + "niccy", + cs->hw.niccy.cfg_reg, + cs->hw.niccy.cfg_reg + 0x40); + release_region(cs->hw.niccy.isac, 4); + return 0; + } + + return setup_niccy(card); +} + +static int __devinit niccy_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct IsdnCard icard = { ISDN_CTYPE_NICCY, }; + int cardnr; + + icard.para[0] = (unsigned long) pdev; + if (!niccy_protocol) + icard.protocol = DEFAULT_PROTO; + else + icard.protocol = niccy_protocol; + + cardnr = hisax_init_hotplug(&icard, niccy_pci_setup); + if (cardnr < 0) + return -ENODEV; + + pci_set_drvdata(pdev, (void *)(unsigned long) cardnr); + return 0; +} + +static struct pci_device_id niccy_pci_table[] = { + { PCI_VDEVICE(SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY) }, + + { } /* terminate list */ +}; + +static struct pci_driver niccy_pci_driver = { + .name = "niccy", + .id_table = niccy_pci_table, + .probe = niccy_pci_init_one, + .remove = hisax_pci_remove_one, +}; + +#endif /* CONFIG_PCI */ + +static int __init niccy_mod_init(void) +{ + int rc = 0; + +#ifdef CONFIG_ISA + if (niccy_irq && niccy_base0 && niccy_base1) { + rc = isa_register_driver(&niccy_isa_driver, 1); + if (rc) + return rc; + } +#ifdef CONFIG_PNP + else { + rc = pnp_register_driver(&niccy_pnp_driver); + if (rc) + return rc; + } +#endif +#endif /* CONFIG_ISA */ + +#ifdef CONFIG_PCI + rc = pci_register_driver(&niccy_pci_driver); + if (rc) + goto err_out_isa; +#endif /* CONFIG_PCI */ + + return 0; + +#ifdef CONFIG_PCI +err_out_isa: + +#ifdef CONFIG_ISA + if (niccy_irq && niccy_base0 && niccy_base1) + isa_unregister_driver(&niccy_isa_driver); +#ifdef CONFIG_PNP + else + pnp_unregister_driver(&niccy_pnp_driver); +#endif /* CONFIG_PNP */ +#endif /* CONFIG_ISA */ + + return rc; +#endif /* CONFIG_PCI */ +} + +static void __exit niccy_mod_exit(void) +{ +#ifdef CONFIG_PCI + pci_unregister_driver(&niccy_pci_driver); +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_ISA + if (niccy_irq && niccy_base0 && niccy_base1) + isa_unregister_driver(&niccy_isa_driver); +#ifdef CONFIG_PNP + else + pnp_unregister_driver(&niccy_pnp_driver); +#endif /* CONFIG_PNP */ +#endif /* CONFIG_ISA */ +} + +module_init(niccy_mod_init); +module_exit(niccy_mod_exit); + +#ifdef CONFIG_ISA +module_param_named(irq, niccy_irq, int, 0444); +MODULE_PARM_DESC(irq, "ISA IRQ. Zero disables ISA support (default)."); + +module_param_named(base0, niccy_base0, int, 0444); +MODULE_PARM_DESC(base0, "ISA I/O base #0. Zero disables ISA support (default)."); + +module_param_named(base1, niccy_base1, int, 0444); +MODULE_PARM_DESC(base1, "ISA I/O base #1. Zero disables ISA support (default)."); +#endif /* CONFIG_ISA */ + +module_param_named(protocol, niccy_protocol, int, 0444); +MODULE_PARM_DESC(protocol, "Values 0 (default) through 4. See ISDN_PTYPE_xxx in linux/isdnif.h"); + +MODULE_DEVICE_TABLE(pci, niccy_pci_table); +MODULE_DESCRIPTION("ISDN HiSax Niccy PCI/PNP driver"); +MODULE_LICENSE("GPL"); _ Patches currently in -mm which might be from jeff@xxxxxxxxxx are git-libata-all.patch 3c509-convert-to-isa_driver-and-pnp_driver-v4.patch 3c509-convert-to-isa_driver-and-pnp_driver-v4-cleanup.patch usb-net-asix-does-not-really-need-10-100mbit.patch forcedeth-power-down-phy-when-interface-is-down.patch forcedeth-fix-mac-address-detection-on-network-card-regression-in-2623.patch 8390-split-8390-support-into-a-pausing-and-a-non-pausing-driver-core.patch e1000e-make-e1000e-default-to-the-same-kconfig-setting-as-e1000.patch update-smc91x-driver-with-arm-versatile-board-info.patch libsas-convert-ata-bridge-to-use-new-eh.patch isdn-hisax-niccy-convert-to-modern-isa-pnp-pci-probing.patch isdn-hisax-diva-convert-to-modern-isa-pnp-pci-probing.patch isdn-hisax-bkm_a8-convert-to-pci-hotplug-api.patch - To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html