The patch titled
rtc-x1205: new style conversion
has been added to the -mm tree. Its filename is
rtc-x1205-new-style-conversion.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: rtc-x1205: new style conversion
From: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Signed-off-by: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: David Brownell <david-b@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-x1205.c | 128 ++++++++++++--------------------------
1 file changed, 43 insertions(+), 85 deletions(-)
diff -puN drivers/rtc/rtc-x1205.c~rtc-x1205-new-style-conversion drivers/rtc/rtc-x1205.c
--- a/drivers/rtc/rtc-x1205.c~rtc-x1205-new-style-conversion
+++ a/drivers/rtc/rtc-x1205.c
@@ -22,20 +22,7 @@
#include <linux/rtc.h>
#include <linux/delay.h>
-#define DRV_VERSION "1.0.7"
-
-/* Addresses to scan: none. This chip is located at
- * 0x6f and uses a two bytes register addressing.
- * Two bytes need to be written to read a single register,
- * while most other chips just require one and take the second
- * one as the data to be written. To prevent corrupting
- * unknown chips, the user must explicitly set the probe parameter.
- */
-
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD;
+#define DRV_VERSION "1.0.8"
/* offsets into CCR area */
@@ -91,19 +78,7 @@ I2C_CLIENT_INSMOD;
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-/* Prototypes */
-static int x1205_attach(struct i2c_adapter *adapter);
-static int x1205_detach(struct i2c_client *client);
-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-
-static struct i2c_driver x1205_driver = {
- .driver = {
- .name = "x1205",
- },
- .id = I2C_DRIVERID_X1205,
- .attach_adapter = &x1205_attach,
- .detach_client = &x1205_detach,
-};
+static struct i2c_driver x1205_driver;
/*
* In the routines that deal directly with the x1205 hardware, we use
@@ -497,58 +472,51 @@ static ssize_t x1205_sysfs_show_dtrim(st
}
static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
-static int x1205_attach(struct i2c_adapter *adapter)
+static int x1205_sysfs_register(struct device *dev)
+{
+ int err;
+
+ err = device_create_file(dev, &dev_attr_atrim);
+ if (err)
+ return err;
+
+ err = device_create_file(dev, &dev_attr_dtrim);
+ if (err)
+ device_remove_file(dev, &dev_attr_atrim);
+
+ return err;
+}
+
+static void x1205_sysfs_unregister(struct device *dev)
{
- return i2c_probe(adapter, &addr_data, x1205_probe);
+ device_remove_file(dev, &dev_attr_atrim);
+ device_remove_file(dev, &dev_attr_dtrim);
}
-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+
+static int x1205_probe(struct i2c_client *client)
{
int err = 0;
unsigned char sr;
- struct i2c_client *client;
struct rtc_device *rtc;
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
- err = -ENODEV;
- goto exit;
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ return -ENODEV;
}
- if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
+ if (x1205_validate_client(client) < 0) {
+ return -ENODEV;
}
- /* I2C client */
- client->addr = address;
- client->driver = &x1205_driver;
- client->adapter = adapter;
-
- strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE);
-
- /* Verify the chip is really an X1205 */
- if (kind < 0) {
- if (x1205_validate_client(client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
- }
-
- /* Inform the i2c layer */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
-
dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
&x1205_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- err = PTR_ERR(rtc);
- goto exit_detach;
- }
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
i2c_set_clientdata(client, rtc);
@@ -565,45 +533,35 @@ static int x1205_probe(struct i2c_adapte
else
dev_err(&client->dev, "couldn't read status\n");
- err = device_create_file(&client->dev, &dev_attr_atrim);
- if (err) goto exit_devreg;
- err = device_create_file(&client->dev, &dev_attr_dtrim);
- if (err) goto exit_atrim;
+ err = x1205_sysfs_register(&client->dev);
+ if (err)
+ goto exit_devreg;
return 0;
-exit_atrim:
- device_remove_file(&client->dev, &dev_attr_atrim);
-
exit_devreg:
rtc_device_unregister(rtc);
-exit_detach:
- i2c_detach_client(client);
-
-exit_kfree:
- kfree(client);
-
-exit:
return err;
}
-static int x1205_detach(struct i2c_client *client)
+static int x1205_remove(struct i2c_client *client)
{
- int err;
struct rtc_device *rtc = i2c_get_clientdata(client);
- if (rtc)
- rtc_device_unregister(rtc);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(client);
-
+ rtc_device_unregister(rtc);
+ x1205_sysfs_unregister(&client->dev);
return 0;
}
+static struct i2c_driver x1205_driver = {
+ .driver = {
+ .name = "rtc-x1205",
+ },
+ .probe = x1205_probe,
+ .remove = x1205_remove,
+};
+
static int __init x1205_init(void)
{
return i2c_add_driver(&x1205_driver);
_
Patches currently in -mm which might be from a.zummo@xxxxxxxxxxxx are
rtc-cmos-display-hpet-emulation-mode.patch
rtc-avoid-legacy-drivers-with-generic-framework.patch
rtc-add-support-for-the-s-35390a-rtc-chip.patch
rtc-add-support-for-the-s-35390a-rtc-chip-checkpatch-fixes.patch
rtc-isl1208-new-style-conversion-and-minor-bug-fixes.patch
rtc-pcf8563-new-style-conversion.patch
rtc-x1205-new-style-conversion.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
