The patch titled
dz: always check if it is safe to console_putchar()
has been removed from the -mm tree. Its filename was
dz-always-check-if-it-is-safe-to-console_putchar.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: dz: always check if it is safe to console_putchar()
From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
Polled transmission is tricky enough with the DZ11 design. While "loop" is
set to a high value, conceptually you are not allowed to transmit without
checking whether the device offers the right transmission line (yes, it is the
device that selects the line -- the driver has no control over it other than
disabling the transmitter offered if it is the wrong one), so the loop has to
be run at least once.
Well, the '1977 or PDP11 view of how serial lines should be handled... Except
that the serial interface used to be quite an impressive board back then
rather than chip.
Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx>
Cc: Jiri Slaby <jirislaby@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/serial/dz.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff -puN drivers/serial/dz.c~dz-always-check-if-it-is-safe-to-console_putchar drivers/serial/dz.c
--- a/drivers/serial/dz.c~dz-always-check-if-it-is-safe-to-console_putchar
+++ a/drivers/serial/dz.c
@@ -685,7 +685,7 @@ static void dz_console_putchar(struct ua
iob();
spin_unlock_irqrestore(&dport->port.lock, flags);
- while (loops--) {
+ do {
trdy = dz_in(dport, DZ_CSR);
if (!(trdy & DZ_TRDY))
continue;
@@ -696,7 +696,7 @@ static void dz_console_putchar(struct ua
dz_out(dport, DZ_TCR, mask);
iob();
udelay(2);
- }
+ } while (loops--);
if (loops) /* Cannot send otherwise. */
dz_out(dport, DZ_TDR, ch);
_
Patches currently in -mm which might be from macro@xxxxxxxxxxxxxx are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
