The patch titled
synclink_gt fix missed serial input signal changes
has been added to the -mm tree. Its filename is
synclink_gt-fix-missed-serial-input-signal-changes.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: synclink_gt fix missed serial input signal changes
From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
Fix missed serial input signal changes caused by rereading the serial
status register during interrupt processing. Now processing is performed
on original status register value.
Signed-off-by: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/char/synclink_gt.c | 68 +++++++++++++++++++----------------
1 file changed, 37 insertions(+), 31 deletions(-)
diff -puN drivers/char/synclink_gt.c~synclink_gt-fix-missed-serial-input-signal-changes drivers/char/synclink_gt.c
--- a/drivers/char/synclink_gt.c~synclink_gt-fix-missed-serial-input-signal-changes
+++ a/drivers/char/synclink_gt.c
@@ -2039,37 +2039,41 @@ static void bh_transmit(struct slgt_info
tty_wakeup(tty);
}
-static void dsr_change(struct slgt_info *info)
+static void dsr_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT3) {
+ info->signals |= SerialSignal_DSR;
+ info->input_signal_events.dsr_up++;
+ } else {
+ info->signals &= ~SerialSignal_DSR;
+ info->input_signal_events.dsr_down++;
+ }
DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_DSR);
return;
}
info->icount.dsr++;
- if (info->signals & SerialSignal_DSR)
- info->input_signal_events.dsr_up++;
- else
- info->input_signal_events.dsr_down++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
}
-static void cts_change(struct slgt_info *info)
+static void cts_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT2) {
+ info->signals |= SerialSignal_CTS;
+ info->input_signal_events.cts_up++;
+ } else {
+ info->signals &= ~SerialSignal_CTS;
+ info->input_signal_events.cts_down++;
+ }
DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_CTS);
return;
}
info->icount.cts++;
- if (info->signals & SerialSignal_CTS)
- info->input_signal_events.cts_up++;
- else
- info->input_signal_events.cts_down++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
@@ -2090,20 +2094,21 @@ static void cts_change(struct slgt_info
}
}
-static void dcd_change(struct slgt_info *info)
+static void dcd_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT1) {
+ info->signals |= SerialSignal_DCD;
+ info->input_signal_events.dcd_up++;
+ } else {
+ info->signals &= ~SerialSignal_DCD;
+ info->input_signal_events.dcd_down++;
+ }
DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_DCD);
return;
}
info->icount.dcd++;
- if (info->signals & SerialSignal_DCD) {
- info->input_signal_events.dcd_up++;
- } else {
- info->input_signal_events.dcd_down++;
- }
#if SYNCLINK_GENERIC_HDLC
if (info->netcount) {
if (info->signals & SerialSignal_DCD)
@@ -2126,20 +2131,21 @@ static void dcd_change(struct slgt_info
}
}
-static void ri_change(struct slgt_info *info)
+static void ri_change(struct slgt_info *info, unsigned short status)
{
- get_signals(info);
+ if (status & BIT0) {
+ info->signals |= SerialSignal_RI;
+ info->input_signal_events.ri_up++;
+ } else {
+ info->signals &= ~SerialSignal_RI;
+ info->input_signal_events.ri_down++;
+ }
DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
slgt_irq_off(info, IRQ_RI);
return;
}
- info->icount.dcd++;
- if (info->signals & SerialSignal_RI) {
- info->input_signal_events.ri_up++;
- } else {
- info->input_signal_events.ri_down++;
- }
+ info->icount.rng++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
@@ -2190,13 +2196,13 @@ static void isr_serial(struct slgt_info
}
if (status & IRQ_DSR)
- dsr_change(info);
+ dsr_change(info, status);
if (status & IRQ_CTS)
- cts_change(info);
+ cts_change(info, status);
if (status & IRQ_DCD)
- dcd_change(info);
+ dcd_change(info, status);
if (status & IRQ_RI)
- ri_change(info);
+ ri_change(info, status);
}
static void isr_rdma(struct slgt_info *info)
_
Patches currently in -mm which might be from paulkf@xxxxxxxxxxxxx are
synclink-standardize-format-of-linux-header-file-includes-with.patch
synclink_gt-fix-missed-serial-input-signal-changes.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
