+ libata-correct-handling-of-tss-dvd.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     libata: correct handling of TSS DVD
has been added to the -mm tree.  Its filename is
     libata-correct-handling-of-tss-dvd.patch

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: libata: correct handling of TSS DVD
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>

Devices that misreport the validity bit for word 93 look like SATA.  If
they are on the blacklist then we must not test for SATA but assume 40 wire
in the 40 wire case (The TSSCorp reports 80 wire on SATA it seems!)

Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Tejun Heo <htejun@xxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 include/linux/ata.h |    2 --
 1 file changed, 2 deletions(-)

diff -puN include/linux/ata.h~libata-correct-handling-of-tss-dvd include/linux/ata.h
--- a/include/linux/ata.h~libata-correct-handling-of-tss-dvd
+++ a/include/linux/ata.h
@@ -639,8 +639,6 @@ static inline int ata_drive_40wire(const
 
 static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
 {
-	if (ata_id_is_sata(dev_id))
-		return 0;	/* SATA */
 	if ((dev_id[93] & 0x2000) == 0x2000)
 		return 0;	/* 80 wire */
 	return 1;
_

Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are

pl2303-fix-mode-switching-regression.patch
pl2303-fix-mode-switching-regression-fix.patch
git-arm.patch
git-libata-all.patch
git-libata-all-fix-pata_winbond-borkage.patch
git-libata-all-wtf.patch
libata-fix-early-use-of-port-printk-checkpatch-fixes.patch
pata_pdc202xx_old-further-fixups.patch
git-netdev-all.patch
bluetooth-rfcomm-tty_close-before-destruct.patch
pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch
pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch
serial-keep-the-dtr-setting-for-serial-console.patch
8250c-support-specifying-dw-apb-uarts-in-device-platform_data.patch
avoid-waking-up-closed-serial-ports-on-resume.patch
serial-avoid-stalling-suspend-if-serial-port-wont-drain.patch
libata-sff-pci-irq-handling-fix.patch
libata-correct-handling-of-tss-dvd.patch
geode-lists-are-subscriber-only.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open-fix.patch
sc26xx-new-serial-driver-for-sc2681-uarts.patch
sc26xx-new-serial-driver-for-sc2681-uarts-update.patch
documentation-about-unaligned-memory-access.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline-checkpatch-fixes.patch
fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline.patch
tty-kill-tty_flipbuf_size.patch
drivers-edac-turnon-edac-device-error-logging.patch
drivers-edac-use-round_jiffies_relative.patch
drivers-edac-add-cell-xdr-memory-types.patch
drivers-edac-add-cell-mc-driver.patch
drivers-edac-i3000-code-tidying.patch
drivers-edac-i3000-replace-macros-with-functions.patch
drivers-edac-add-freescale-mpc85xx-driver.patch
drivers-edac-add-marvell-mv64x60-driver.patch
drivers-edac-add-marvell-mv64x60-driver-fix.patch
dz-clean-up-and-improve-the-setup-of-termios-settings.patch
char-rocket-switch-long-delay-to-sleep.patch
char-rocket-printk-cleanup.patch
char-char-serial-remove-serial_type_normal-redefines.patch
char-mxser_new-ioaddresses-are-ulong.patch
char-stallion-fix-compiler-warnings.patch
char-riscom8-change-rc_init_drivers-prototype.patch
mxser-mxser_new-first-pass-over-termios-reporting-for-the.patch
tty-let-architectures-override-the-user-kernel-macros.patch
tty-s390-support-for-termios2.patch
moxa-first-pass-at-termios-reporting.patch
n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch
rocket-first-pass-at-termios-reporting.patch
rocket-dont-let-random-users-reset-the-controller.patch
tty_audit-fix-checkpatch-complaint.patch
tty_io-drag-screaming-into-coding-style-compliance.patch
tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch
8250_early-coding-style.patch
8250_gsc-coding-style.patch
8250_hp300-coding-style.patch
8250_hub6-codding-style.patch
8250_pci-coding-style.patch
serial8250-coding-style.patch
8250-enable-rate-reporting-via-termios.patch
serial_core-bring-mostly-into-line-with-coding-style.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux