The patch titled belkin_sa: clean up for new style termios and speed handling, plus style has been removed from the -mm tree. Its filename was belkin_sa-clean-up-for-new-style-termios-and-speed.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ Subject: belkin_sa: clean up for new style termios and speed handling, plus style From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> A tester with actual hardware would be useful Signed-off-by: Alan Cox <alan@xxxxxxxxxx> Cc: Greg KH <greg@xxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/belkin_sa.c | 35 +++++++++++++------------------ 1 file changed, 15 insertions(+), 20 deletions(-) diff -puN drivers/usb/serial/belkin_sa.c~belkin_sa-clean-up-for-new-style-termios-and-speed drivers/usb/serial/belkin_sa.c --- a/drivers/usb/serial/belkin_sa.c~belkin_sa-clean-up-for-new-style-termios-and-speed +++ a/drivers/usb/serial/belkin_sa.c @@ -350,14 +350,12 @@ static void belkin_sa_set_termios (struc unsigned long control_state; int bad_flow_control; speed_t baud; + struct ktermios *termios = port->tty->termios; - if ((!port->tty) || (!port->tty->termios)) { - dbg ("%s - no tty or termios structure", __FUNCTION__); - return; - } + iflag = termios->c_iflag; + cflag = termios->c_cflag; - iflag = port->tty->termios->c_iflag; - cflag = port->tty->termios->c_cflag; + termios->c_cflag &= ~CMSPAR; /* get a local copy of the current port settings */ spin_lock_irqsave(&priv->lock, flags); @@ -369,33 +367,30 @@ static void belkin_sa_set_termios (struc old_cflag = old_termios->c_cflag; /* Set the baud rate */ - if( (cflag&CBAUD) != (old_cflag&CBAUD) ) { + if ((cflag & CBAUD) != (old_cflag & CBAUD)) { /* reassert DTR and (maybe) RTS on transition from B0 */ if( (old_cflag&CBAUD) == B0 ) { control_state |= (TIOCM_DTR|TIOCM_RTS); if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0) err("Set DTR error"); /* don't set RTS if using hardware flow control */ - if (!(old_cflag&CRTSCTS) ) + if (!(old_cflag & CRTSCTS)) if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 1) < 0) err("Set RTS error"); } } baud = tty_get_baud_rate(port->tty); - if (baud == 0) { - dbg("%s - tty_get_baud_rate says 0 baud", __FUNCTION__); - return; - } - urb_value = BELKIN_SA_BAUD(baud); - /* Clip to maximum speed */ - if (urb_value == 0) - urb_value = 1; - /* Turn it back into a resulting real baud rate */ - baud = BELKIN_SA_BAUD(urb_value); - /* FIXME: Once the tty updates are done then push this back to the tty */ + if (baud) { + urb_value = BELKIN_SA_BAUD(baud); + /* Clip to maximum speed */ + if (urb_value == 0) + urb_value = 1; + /* Turn it back into a resulting real baud rate */ + baud = BELKIN_SA_BAUD(urb_value); - if ((cflag & CBAUD) != B0 ) { + /* Report the actual baud rate back to the caller */ + tty_encode_baud_rate(port->tty, baud, baud); if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0) err("Set baudrate error"); } else { _ Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are git-arm.patch git-libata-all.patch libata-fix-early-use-of-port-printk-checkpatch-fixes.patch git-netdev-all.patch bluetooth-rfcomm-tty_close-before-destruct.patch pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch serial-keep-the-dtr-setting-for-serial-console.patch geode-lists-are-subscriber-only.patch get-rid-of-nr_open-and-introduce-a-sysctl_nr_open.patch get-rid-of-nr_open-and-introduce-a-sysctl_nr_open-fix.patch sc26xx-new-serial-driver-for-sc2681-uarts.patch sc26xx-new-serial-driver-for-sc2681-uarts-update.patch documentation-about-unaligned-memory-access.patch tty-enable-the-echoing-of-c-in-the-n_tty-discipline.patch tty-enable-the-echoing-of-c-in-the-n_tty-discipline-checkpatch-fixes.patch tty-kill-tty_flipbuf_size.patch drivers-edac-turnon-edac-device-error-logging.patch drivers-edac-use-round_jiffies_relative.patch drivers-edac-add-cell-xdr-memory-types.patch drivers-edac-add-cell-mc-driver.patch drivers-edac-i3000-code-tidying.patch drivers-edac-i3000-replace-macros-with-functions.patch drivers-edac-add-freescale-mpc85xx-driver.patch drivers-edac-add-marvell-mv64x60-driver.patch drivers-edac-add-marvell-mv64x60-driver-fix.patch dz-clean-up-and-improve-the-setup-of-termios-settings.patch char-rocket-switch-long-delay-to-sleep.patch char-rocket-printk-cleanup.patch char-char-serial-remove-serial_type_normal-redefines.patch char-mxser_new-ioaddresses-are-ulong.patch char-stallion-fix-compiler-warnings.patch char-riscom8-change-rc_init_drivers-prototype.patch mxser-mxser_new-first-pass-over-termios-reporting-for-the.patch tty-let-architectures-override-the-user-kernel-macros.patch tty-s390-support-for-termios2.patch moxa-first-pass-at-termios-reporting.patch n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch rocket-first-pass-at-termios-reporting.patch rocket-dont-let-random-users-reset-the-controller.patch tty_audit-fix-checkpatch-complaint.patch tty_io-drag-screaming-into-coding-style-compliance.patch tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch 8250_early-coding-style.patch 8250_gsc-coding-style.patch 8250_hp300-coding-style.patch 8250_hub6-codding-style.patch 8250_pci-coding-style.patch serial8250-coding-style.patch 8250-enable-rate-reporting-via-termios.patch serial_core-bring-mostly-into-line-with-coding-style.patch - To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html