The patch titled
libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
has been removed from the -mm tree. Its filename was
libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
From: Tejun Heo <htejun@xxxxxxxxx>
Finding out matching transfer mode from ACPI GTM values is useful for other
purposes too. Separate out the function and timing tables from
pata_acpi::pacpi_discover_modes().
Other than checking shared-configuration bit after doing ata_acpi_gtm() in
pacpi_discover_modes() which should be safe, this patch doesn't introduce any
behavior change.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-acpi.c | 78 ++++++++++++++++++++++++++++++++++++
drivers/ata/pata_acpi.c | 66 +++++-------------------------
include/linux/libata.h | 25 +++++++++++
3 files changed, 114 insertions(+), 55 deletions(-)
diff -puN drivers/ata/libata-acpi.c~libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes drivers/ata/libata-acpi.c
--- a/drivers/ata/libata-acpi.c~libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes
+++ a/drivers/ata/libata-acpi.c
@@ -421,6 +421,84 @@ int ata_acpi_cbl_80wire(struct ata_port
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
+/* Welcome to ACPI, bring a bucket */
+const unsigned int ata_acpi_pio_cycle[7] = {
+ 600, 383, 240, 180, 120, 100, 80
+};
+EXPORT_SYMBOL_GPL(ata_acpi_pio_cycle);
+
+const unsigned int ata_acpi_mwdma_cycle[5] = {
+ 480, 150, 120, 100, 80
+};
+EXPORT_SYMBOL_GPL(ata_acpi_mwdma_cycle);
+
+const unsigned int ata_acpi_udma_cycle[7] = {
+ 120, 80, 60, 45, 30, 20, 15
+};
+EXPORT_SYMBOL_GPL(ata_acpi_udma_cycle);
+
+/**
+ * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
+ * @dev: target device
+ * @gtm: GTM parameter to use
+ *
+ * Determine xfermask for @dev from @gtm.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * Determined xfermask.
+ */
+unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm)
+{
+ int unit, i;
+ u32 t;
+ unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO);
+
+ /* we always use the 0 slot for crap hardware */
+ unit = dev->devno;
+ if (!(gtm->flags & 0x10))
+ unit = 0;
+
+ /* start by scanning for PIO modes */
+ for (i = 0; i < 7; i++) {
+ t = gtm->drive[unit].pio;
+ if (t <= ata_acpi_pio_cycle[i]) {
+ mask |= (2 << (ATA_SHIFT_PIO + i)) - 1;
+ break;
+ }
+ }
+
+ /* See if we have MWDMA or UDMA data. We don't bother with
+ * MWDMA if UDMA is available as this means the BIOS set UDMA
+ * and our error changedown if it works is UDMA to PIO anyway.
+ */
+ if (gtm->flags & (1 << (2 * unit))) {
+ /* MWDMA */
+ for (i = 0; i < 5; i++) {
+ t = gtm->drive[unit].dma;
+ if (t <= ata_acpi_mwdma_cycle[i]) {
+ mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1;
+ break;
+ }
+ }
+ } else {
+ /* UDMA */
+ for (i = 0; i < 7; i++) {
+ t = gtm->drive[unit].dma;
+ if (t <= ata_acpi_udma_cycle[i]) {
+ mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1;
+ break;
+ }
+ }
+ }
+
+ return mask;
+}
+EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask);
+
/**
* taskfile_load_raw - send taskfile registers to host controller
* @dev: target ATA device
diff -puN drivers/ata/pata_acpi.c~libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes drivers/ata/pata_acpi.c
--- a/drivers/ata/pata_acpi.c~libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes
+++ a/drivers/ata/pata_acpi.c
@@ -81,17 +81,6 @@ static void pacpi_error_handler(struct a
NULL, ata_std_postreset);
}
-/* Welcome to ACPI, bring a bucket */
-static const unsigned int pio_cycle[7] = {
- 600, 383, 240, 180, 120, 100, 80
-};
-static const unsigned int mwdma_cycle[5] = {
- 480, 150, 120, 100, 80
-};
-static const unsigned int udma_cycle[7] = {
- 120, 80, 60, 45, 30, 20, 15
-};
-
/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
@@ -103,56 +92,20 @@ static const unsigned int udma_cycle[7]
static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
{
- int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- int i;
- u32 t;
- unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO);
-
struct ata_acpi_gtm probe;
+ unsigned int xfer_mask;
probe = acpi->gtm;
- /* We always use the 0 slot for crap hardware */
- if (!(probe.flags & 0x10))
- unit = 0;
-
ata_acpi_gtm(ap, &probe);
- /* Start by scanning for PIO modes */
- for (i = 0; i < 7; i++) {
- t = probe.drive[unit].pio;
- if (t <= pio_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_PIO + i)) - 1;
- break;
- }
- }
+ xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
- /* See if we have MWDMA or UDMA data. We don't bother with MWDMA
- if UDMA is availabe as this means the BIOS set UDMA and our
- error changedown if it works is UDMA to PIO anyway */
- if (probe.flags & (1 << (2 * unit))) {
- /* MWDMA */
- for (i = 0; i < 5; i++) {
- t = probe.drive[unit].dma;
- if (t <= mwdma_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1;
- break;
- }
- }
- } else {
- /* UDMA */
- for (i = 0; i < 7; i++) {
- t = probe.drive[unit].dma;
- if (t <= udma_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1;
- break;
- }
- }
- }
- if (mask & (0xF8 << ATA_SHIFT_UDMA))
+ if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
ap->cbl = ATA_CBL_PATA80;
- return mask;
+
+ return xfer_mask;
}
/**
@@ -185,7 +138,8 @@ static void pacpi_set_piomode(struct ata
unit = 0;
/* Now stuff the nS values into the structure */
- acpi->gtm.drive[unit].pio = pio_cycle[adev->pio_mode - XFER_PIO_0];
+ acpi->gtm.drive[unit].pio =
+ ata_acpi_pio_cycle[adev->pio_mode - XFER_PIO_0];
ata_acpi_stm(ap, &acpi->gtm);
/* See what mode we actually got */
ata_acpi_gtm(ap, &acpi->gtm);
@@ -207,10 +161,12 @@ static void pacpi_set_dmamode(struct ata
/* Now stuff the nS values into the structure */
if (adev->dma_mode >= XFER_UDMA_0) {
- acpi->gtm.drive[unit].dma = udma_cycle[adev->dma_mode - XFER_UDMA_0];
+ acpi->gtm.drive[unit].dma =
+ ata_acpi_udma_cycle[adev->dma_mode - XFER_UDMA_0];
acpi->gtm.flags |= (1 << (2 * unit));
} else {
- acpi->gtm.drive[unit].dma = mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0];
+ acpi->gtm.drive[unit].dma =
+ ata_acpi_mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0];
acpi->gtm.flags &= ~(1 << (2 * unit));
}
ata_acpi_stm(ap, &acpi->gtm);
diff -puN include/linux/libata.h~libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes include/linux/libata.h
--- a/include/linux/libata.h~libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes
+++ a/include/linux/libata.h
@@ -950,11 +950,36 @@ enum {
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
+extern const unsigned int ata_acpi_pio_cycle[7];
+extern const unsigned int ata_acpi_mwdma_cycle[5];
+extern const unsigned int ata_acpi_udma_cycle[7];
+
extern int ata_acpi_cbl_80wire(struct ata_port *ap);
int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
+unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm);
+
#else
static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
+
+static inline int ata_acpi_stm(const struct ata_port *ap,
+ struct ata_acpi_gtm *stm)
+{
+ return -ENOSYS;
+}
+
+static inline int ata_acpi_gtm(const struct ata_port *ap,
+ struct ata_acpi_gtm *stm)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm)
+{
+ return 0;
+}
#endif
#ifdef CONFIG_PCI
_
Patches currently in -mm which might be from htejun@xxxxxxxxx are
git-libata-all.patch
libata-xfer_mask-is-unsigned-int-not-unsigned-long.patch
libata-add-toshiba-mk1637gsx-to-spurious-command-completion-list.patch
sata_nv-dont-use-legacy-dma-in-adma-mode-v3.patch
libata-set-proper-ata-udma-mode-for-bf548-according-to-system-clock-checkpatch-fixes.patch
ata-ahci-enclosure-management-via-led.patch
libata-fix-early-use-of-port-printk-checkpatch-fixes.patch
pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
scsi-early-detection-of-medium-not-present-updated.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
