The patch titled
x86: unify percpu.h
has been removed from the -mm tree. Its filename was
x86-unify-percpuh.patch
This patch was dropped because an updated version will be merged
------------------------------------------------------
Subject: x86: unify percpu.h
From: Christoph Lameter <clameter@xxxxxxx>
Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty
small so the patch is simply putting them together.
Signed-off-by: Christoph Lameter <clameter@xxxxxxx>
Cc: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxx>
Cc: Andi Kleen <ak@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
include/asm-x86/percpu.h | 145 +++++++++++++++++++++++++++++++++-
include/asm-x86/percpu_32.h | 119 ---------------------------
include/asm-x86/percpu_64.h | 20 ----
3 files changed, 141 insertions(+), 143 deletions(-)
diff -puN include/asm-x86/percpu.h~x86-unify-percpuh include/asm-x86/percpu.h
--- a/include/asm-x86/percpu.h~x86-unify-percpuh
+++ a/include/asm-x86/percpu.h
@@ -1,5 +1,142 @@
-#ifdef CONFIG_X86_32
-# include "percpu_32.h"
-#else
-# include "percpu_64.h"
+#ifndef _ASM_X86_PERCPU_H_
+#define _ASM_X86_PERCPU_H_
+
+#ifdef CONFIG_X86_64
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+ in the PDA. Longer term the PDA and every per cpu variable
+ should be just put into a single section and referenced directly
+ from %gs */
+
+#ifdef CONFIG_SMP
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
+#define __my_cpu_offset read_pda(data_offset)
+
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
#endif
+#include <asm-generic/percpu.h>
+
+DECLARE_PER_CPU(struct x8664_pda, pda);
+
+#else /* CONFIG_X86_64 */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ * var - variable name
+ * reg - 32bit register
+ *
+ * The resulting address is stored in the "reg" argument.
+ *
+ * Example:
+ * PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+#define PER_CPU(var, reg) \
+ movl %fs:per_cpu__##this_cpu_off, reg; \
+ lea per_cpu__##var(reg), reg
+#define PER_CPU_VAR(var) %fs:per_cpu__##var
+#else /* ! SMP */
+#define PER_CPU(var, reg) \
+ movl $per_cpu__##var, reg
+#define PER_CPU_VAR(var) per_cpu__##var
+#endif /* SMP */
+
+#else /* ...!ASSEMBLY */
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ * var - variable name
+ * cpu - 32bit register containing the current CPU number
+ *
+ * The resulting address is stored in the "cpu" argument.
+ *
+ * Example:
+ * PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
+
+/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%fs:"
+
+#else /* !SMP */
+
+#define __percpu_seg ""
+
+#endif /* SMP */
+
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op,var,val) \
+ do { \
+ typedef typeof(var) T__; \
+ if (0) { T__ tmp__; tmp__ = (val); } \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 2: \
+ asm(op "w %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 4: \
+ asm(op "l %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ } while (0)
+
+#define percpu_from_op(op,var) \
+ ({ \
+ typeof(var) ret__; \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 2: \
+ asm(op "w "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 4: \
+ asm(op "l "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ ret__; })
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+#endif /* _ASM_X86_PERCPU_H_ */
diff -puN include/asm-x86/percpu_32.h~x86-unify-percpuh /dev/null
--- a/include/asm-x86/percpu_32.h
+++ /dev/null
@@ -1,119 +0,0 @@
-#ifndef __ARCH_I386_PERCPU__
-#define __ARCH_I386_PERCPU__
-
-#ifdef __ASSEMBLY__
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-#define PER_CPU(var, reg) \
- movl %fs:per_cpu__##this_cpu_off, reg; \
- lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var) %fs:per_cpu__##var
-#else /* ! SMP */
-#define PER_CPU(var, reg) \
- movl $per_cpu__##var, reg
-#define PER_CPU_VAR(var) per_cpu__##var
-#endif /* SMP */
-
-#else /* ...!ASSEMBLY */
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-
-#define __my_cpu_offset x86_read_percpu(this_cpu_off)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
-
-#else /* !SMP */
-
-#define __percpu_seg ""
-
-#endif /* SMP */
-
-#include <asm-generic/percpu.h>
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* For arch-specific code, we can use direct single-insn ops (they
- * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(op,var,val) \
- do { \
- typedef typeof(var) T__; \
- if (0) { T__ tmp__; tmp__ = (val); } \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 2: \
- asm(op "w %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 4: \
- asm(op "l %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- } while (0)
-
-#define percpu_from_op(op,var) \
- ({ \
- typeof(var) ret__; \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 2: \
- asm(op "w "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 4: \
- asm(op "l "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- ret__; })
-
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ARCH_I386_PERCPU__ */
diff -puN include/asm-x86/percpu_64.h~x86-unify-percpuh /dev/null
--- a/include/asm-x86/percpu_64.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_X8664_PERCPU_H_
-#define _ASM_X8664_PERCPU_H_
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
- in the PDA. Longer term the PDA and every per cpu variable
- should be just put into a single section and referenced directly
- from %gs */
-
-#ifdef CONFIG_SMP
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-#endif
-#include <asm-generic/percpu.h>
-#endif /* _ASM_X8664_PERCPU_H_ */
_
Patches currently in -mm which might be from clameter@xxxxxxx are
origin.patch
ia64-slim-down-__clear_bit_unlock.patch
git-unionfs.patch
git-x86.patch
x86_64-make-sparsemem-vmemmap-the-only-memory-model.patch
acpi-avoid-references-to-impossible-processors.patch
pagecache-zeroing-zero_user_segment-zero_user_segments-and-zero_user.patch
pagecache-zeroing-zero_user_segment-zero_user_segments-and-zero_user-fix.patch
pagecache-zeroing-zero_user_segment-zero_user_segments-and-zero_user-fix-2.patch
move-vmalloc_to_page-to-mm-vmalloc.patch
vmalloc-add-const-to-void-parameters.patch
i386-resolve-dependency-of-asm-i386-pgtableh-on-highmemh.patch
i386-resolve-dependency-of-asm-i386-pgtableh-on-highmemh-checkpatch-fixes.patch
is_vmalloc_addr-check-if-an-address-is-within-the-vmalloc-boundaries.patch
vmalloc-clean-up-page-array-indexing.patch
vunmap-return-page-array-passed-on-vmap.patch
slub-move-count_partial.patch
slub-rename-numa-defrag_ratio-to-remote_node_defrag_ratio.patch
slub-consolidate-add_partial-and-add_partial_tail-to-one-function.patch
slub-use-non-atomic-bit-unlock.patch
slub-fix-coding-style-violations.patch
slub-fix-coding-style-violations-checkpatch-fixes.patch
slub-noinline-some-functions-to-avoid-them-being-folded-into-alloc-free.patch
slub-move-kmem_cache_node-determination-into-add_full-and-add_partial.patch
slub-move-kmem_cache_node-determination-into-add_full-and-add_partial-slub-workaround-for-lockdep-confusion.patch
slub-avoid-checking-for-a-valid-object-before-zeroing-on-the-fast-path.patch
slub-__slab_alloc-exit-path-consolidation.patch
slub-provide-unique-end-marker-for-each-slab.patch
slub-provide-unique-end-marker-for-each-slab-fix.patch
slub-avoid-referencing-kmem_cache-structure-in-__slab_alloc.patch
slub-optional-fast-path-using-cmpxchg_local.patch
slub-do-our-own-locking-via-slab_lock-and-slab_unlock.patch
slub-do-our-own-locking-via-slab_lock-and-slab_unlock-checkpatch-fixes.patch
slub-do-our-own-locking-via-slab_lock-and-slab_unlock-fix.patch
slub-restructure-slab-alloc.patch
slub-comment-kmem_cache_cpu-structure.patch
vm-allow-get_page_unless_zero-on-compound-pages.patch
bufferhead-revert-constructor-removal.patch
bufferhead-revert-constructor-removal-checkpatch-fixes.patch
swapin_readahead-excise-numa-bogosity.patch
page-allocator-clean-up-pcp-draining-functions.patch
vmstat-small-revisions-to-refresh_cpu_vm_stats.patch
page-allocator-get-rid-of-the-list-of-cold-pages.patch
page-allocator-get-rid-of-the-list-of-cold-pages-fix.patch
mm-sparsec-check-the-return-value-of-sparse_index_alloc.patch
percpu-__percpu_alloc_mask-can-dynamically-size-percpu_data.patch
mm-prevent-dereferencing-non-allocated-per_cpu-variables.patch
mm-prevent-dereferencing-non-allocated-per_cpu-variables-fix.patch
memcontrol-move-oom-task-exclusion-to-tasklist.patch
oom-add-sysctl-to-enable-task-memory-dump.patch
add-cmpxchg_local-to-asm-generic-for-per-cpu-atomic-operations.patch
add-cmpxchg_local-cmpxchg64-and-cmpxchg64_local-to-ia64.patch
dentries-extract-common-code-to-remove-dentry-from-lru.patch
dentries-extract-common-code-to-remove-dentry-from-lru-fix.patch
modules-handle-symbols-that-have-a-zero-value.patch
modules-include-sectionsh-to-avoid-defining-linker-variables.patch
modules-fold-percpu_modcopy-into-modulec-and-get-rid-of-the-macro-from-hell.patch
reiser4.patch
reiser4-portion-of-zero_user-cleanup-patch.patch
page-owner-tracking-leak-detector.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
