The patch titled 8250_pci: coding style has been added to the -mm tree. Its filename is 8250_pci-coding-style.patch *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find out what to do about this ------------------------------------------------------ Subject: 8250_pci: coding style From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Alan Cox <alan@xxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/serial/8250_pci.c | 109 +++++++++++++++++------------------- 1 file changed, 54 insertions(+), 55 deletions(-) diff -puN drivers/serial/8250_pci.c~8250_pci-coding-style drivers/serial/8250_pci.c --- a/drivers/serial/8250_pci.c~8250_pci-coding-style +++ a/drivers/serial/8250_pci.c @@ -114,7 +114,7 @@ afavlab_setup(struct serial_private *pri struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; - + bar = FL_GET_BASE(board->flags); if (idx < 4) bar += idx; @@ -201,8 +201,8 @@ static int pci_inteli960ni_init(struct p return -ENODEV; /* is firmware started? */ - pci_read_config_dword(dev, 0x44, (void*) &oldval); - if (oldval == 0x00001000L) { /* RESET value */ + pci_read_config_dword(dev, 0x44, (void *)&oldval); + if (oldval == 0x00001000L) { /* RESET value */ printk(KERN_DEBUG "Local i960 firmware missing"); return -ENODEV; } @@ -227,11 +227,11 @@ static int pci_plx9050_init(struct pci_d irq_config = 0x41; if (dev->vendor == PCI_VENDOR_ID_PANACOM || - dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) { + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) irq_config = 0x43; - } + if ((dev->vendor == PCI_VENDOR_ID_PLX) && - (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) /* * As the megawolf cards have the int pins active * high, and have 2 UART chips, both ints must be @@ -241,8 +241,6 @@ static int pci_plx9050_init(struct pci_d * deep FIFOs */ irq_config = 0x5b; - } - /* * enable/disable interrupts */ @@ -317,14 +315,14 @@ static int sbs_init(struct pci_dev *dev) { u8 __iomem *p; - p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); + p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0)); if (p == NULL) return -ENOMEM; /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ - writeb(0x10,p + OCT_REG_CR_OFF); + writeb(0x10, p + OCT_REG_CR_OFF); udelay(50); - writeb(0x0,p + OCT_REG_CR_OFF); + writeb(0x0, p + OCT_REG_CR_OFF); /* Set bit-2 (INTENABLE) of Control Register */ writeb(0x4, p + OCT_REG_CR_OFF); @@ -341,10 +339,10 @@ static void __devexit sbs_exit(struct pc { u8 __iomem *p; - p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); - if (p != NULL) { + p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0)); + /* FIXME: What if resource_len < OCT_REG_CR_OFF */ + if (p != NULL) writeb(0, p + OCT_REG_CR_OFF); - } iounmap(p); } @@ -360,7 +358,7 @@ static void __devexit sbs_exit(struct pc * with other OSes (like M$ DOS). * * SIIG support added by Andrey Panin <pazke@xxxxxxxxx>, 10/1999 - * + * * There is two family of SIIG serial cards with different PCI * interface chip and different configuration methods: * - 10x cards have control registers in IO and/or memory space; @@ -463,21 +461,21 @@ static const unsigned short timedia_sing static const unsigned short timedia_dual_port[] = { 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, - 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, - 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 0xD079, 0 }; static const unsigned short timedia_quad_port[] = { - 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, - 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 0xB157, 0 }; static const unsigned short timedia_eight_port[] = { - 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 }; @@ -630,7 +628,8 @@ static int pci_ite887x_init(struct pci_d ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); /* write INTCBAR - ioport */ - pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]); + pci_write_config_dword(dev, ITE_887x_INTCBAR, + inta_addr[i]); ret = inb(inta_addr[i]); if (ret != 0xff) { /* ioport connected */ @@ -729,7 +728,7 @@ pci_default_setup(struct serial_private if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) return 1; - + return setup_port(priv, port, bar, offset, board->reg_shift); } @@ -807,7 +806,7 @@ static struct pci_serial_quirk pci_seria .init = pci_plx9050_init, .setup = pci_default_setup, .exit = __devexit_p(pci_plx9050_exit), - }, + }, { .vendor = PCI_VENDOR_ID_PANACOM, .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, @@ -996,7 +995,7 @@ static struct pci_serial_quirk *find_qui quirk_id_matches(quirk->device, dev->device) && quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && quirk_id_matches(quirk->subdevice, dev->subsystem_device)) - break; + break; return quirk; } @@ -1669,7 +1668,7 @@ static struct pciserial_board pci_boards }; static const struct pci_device_id softmodem_blacklist[] = { - { PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ }; /* @@ -1682,13 +1681,13 @@ serial_pci_guess_board(struct pci_dev *d { const struct pci_device_id *blacklist; int num_iomem, num_port, first_port = -1, i; - + /* * If it is not a communications device or the programming * interface is greater than 6, give up. * * (Should we try to make guesses for multiport serial devices - * later?) + * later?) */ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || @@ -1821,25 +1820,23 @@ pciserial_init_ports(struct pci_dev *dev break; #ifdef SERIAL_DEBUG_PCI - printk("Setup PCI port: port %x, irq %d, type %d\n", + printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); #endif - + priv->line[i] = serial8250_register_port(&serial_port); if (priv->line[i] < 0) { printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); break; } } - priv->nr = i; - return priv; - err_deinit: +err_deinit: if (quirk->exit) quirk->exit(dev); - err_out: +err_out: return priv; } EXPORT_SYMBOL_GPL(pciserial_init_ports); @@ -2129,22 +2126,22 @@ static struct pci_device_id serial_pci_t pbn_b0_8_1843200_200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_1_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_2_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_4_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_2_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_4_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_8_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -2159,11 +2156,11 @@ static struct pci_device_id serial_pci_t /* * VScom SPCOM800, from sl@xxxx */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_8_921600 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_4_921600 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_KEYSPAN, @@ -2181,27 +2178,27 @@ static struct pci_device_id serial_pci_t pbn_b2_4_115200 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, pbn_b2_4_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, pbn_b2_8_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, pbn_b2_16_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, pbn_b2_16_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, pbn_b2_4_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, pbn_b2_8_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_EXSYS, @@ -2227,10 +2224,12 @@ static struct pci_device_id serial_pci_t PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b1_8_115200 }, { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, + 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, + 0, 0, pbn_b0_4_1152000 }, /* @@ -2270,7 +2269,7 @@ static struct pci_device_id serial_pci_t * Digitan DS560-558, from jimd@xxxxxxxxx */ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b1_1_115200 }, /* @@ -2278,16 +2277,16 @@ static struct pci_device_id serial_pci_t * The 400L and 800L have a custom setup quirk. */ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_1_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_2_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, PCI_ANY_ID, PCI_ANY_ID, 0, 0, _ Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are termios-document-callback-more-clearly.patch revert-keyspan-init-termios-properly.patch git-arm.patch git-libata-all.patch pata_hpt37x-fix-outstanding-bug-reports-on-the-hpt374-and-37x-cable-detect-checkpatch-fixes.patch libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes.patch libata-fix-ata_acpi_gtm_xfermask.patch libata-implement-ata_timing_cycle2mode-and-use-it-in-libata-acpi-and-pata_acpi.patch libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch libata-add-ata_cbl_pata_ign.patch pata_amd-update-mode-selection-for-nv-patas.patch ahci-invalid-use-of-writel-readl-with-iomap.patch libata-core-list-more-documentation-sources-for-reference.patch libata-iordy-handling.patch libata-sff-tf_load.patch pata_ali-add-mitac-8317-and-derivatives.patch pata_ali-lots-of-problems-still-showing-up-with-small-atapi-dma.patch pata_hpt37x-fix-cable-detect-bug-spotted-by-sergei.patch pata_isapnp-polled-devices.patch pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards.patch pata_ninja32-cardbus-ata-initial-support.patch pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch serial-keep-the-dtr-setting-for-serial-console.patch quirk_vialatency-omit-reading-pci-revision-id.patch quirk_vialatency-omit-reading-pci-revision-id-checkpatch-fixes.patch git-scsi-rc-fixes.patch initio-fix-conflict-when-loading-driver.patch pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch geode-lists-are-subscriber-only.patch tty-kill-tty_flipbuf_size.patch drivers-edac-turnon-edac-device-error-logging.patch drivers-edac-use-round_jiffies_relative.patch drivers-edac-add-cell-xdr-memory-types.patch drivers-edac-add-cell-mc-driver.patch drivers-edac-i3000-code-tidying.patch drivers-edac-i3000-replace-macros-with-functions.patch drivers-edac-add-freescale-mpc85xx-driver.patch drivers-edac-add-marvell-mv64x60-driver.patch drivers-edac-add-marvell-mv64x60-driver-fix.patch dz-clean-up-and-improve-the-setup-of-termios-settings.patch char-rocket-switch-long-delay-to-sleep.patch char-rocket-printk-cleanup.patch char-char-serial-remove-serial_type_normal-redefines.patch char-mxser_new-ioaddresses-are-ulong.patch char-stallion-fix-compiler-warnings.patch char-riscom8-change-rc_init_drivers-prototype.patch tty-add-the-new-termios2-ioctls-to-the-compatible.patch tty-let-architectures-override-the-user-kernel-macros.patch tty-s390-support-for-termios2.patch moxa-first-pass-at-termios-reporting.patch n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch rocket-first-pass-at-termios-reporting.patch rocket-dont-let-random-users-reset-the-controller.patch tty_audit-fix-checkpatch-complaint.patch tty_io-drag-screaming-into-coding-style-compliance.patch tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch 8250_early-coding-style.patch 8250_gsc-coding-style.patch 8250_hp300-coding-style.patch 8250_hub6-codding-style.patch 8250_pci-coding-style.patch serial8250-coding-style.patch 8250-enable-rate-reporting-via-termios.patch serial_core-bring-mostly-into-line-with-coding-style.patch - To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html