The patch titled
8250_early: coding style
has been added to the -mm tree. Its filename is
8250_early-coding-style.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: 8250_early: coding style
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/serial/8250_early.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff -puN drivers/serial/8250_early.c~8250_early-coding-style drivers/serial/8250_early.c
--- a/drivers/serial/8250_early.c~8250_early-coding-style
+++ a/drivers/serial/8250_early.c
@@ -82,7 +82,8 @@ static void __init serial_putc(struct ua
serial_out(port, UART_TX, c);
}
-static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count)
+static void __init early_serial8250_write(struct console *console,
+ const char *s, unsigned int count)
{
struct uart_port *port = &early_device.port;
unsigned int ier;
@@ -132,7 +133,8 @@ static void __init init_port(struct earl
serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
-static int __init parse_options(struct early_serial8250_device *device, char *options)
+static int __init parse_options(struct early_serial8250_device *device,
+ char *options)
{
struct uart_port *port = &device->port;
int mmio, length;
@@ -145,8 +147,10 @@ static int __init parse_options(struct e
port->iotype = UPIO_MEM;
port->mapbase = simple_strtoul(options + 5, &options, 0);
#ifdef CONFIG_FIX_EARLYCON_MEM
- set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK);
- port->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+ port->mapbase & PAGE_MASK);
+ port->membase =
+ (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
port->membase += port->mapbase & ~PAGE_MASK;
#else
port->membase = ioremap(port->mapbase, 64);
@@ -165,7 +169,8 @@ static int __init parse_options(struct e
} else
return -EINVAL;
- if ((options = strchr(options, ','))) {
+ options = strchr(options, ',');
+ if (options) {
options++;
device->baud = simple_strtoul(options, NULL, 0);
length = min(strcspn(options, " "), sizeof(device->options));
@@ -179,7 +184,7 @@ static int __init parse_options(struct e
printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
mmio ? "MMIO" : "I/O port",
mmio ? (unsigned long long) port->mapbase
- : (unsigned long long) port->iobase,
+ : (unsigned long long) port->iobase,
device->options);
return 0;
}
@@ -199,7 +204,8 @@ static int __init early_serial8250_setup
if (device->port.membase || device->port.iobase)
return 0;
- if ((err = parse_options(device, options)) < 0)
+ err = parse_options(device, options);
+ if (err < 0)
return err;
init_port(device);
@@ -219,7 +225,8 @@ int __init setup_early_serial8250_consol
}
options = strchr(cmdline, ',') + 1;
- if ((err = early_serial8250_setup(options)) < 0)
+ err = early_serial8250_setup(options);
+ if (err < 0)
return err;
register_console(&early_serial8250_console);
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
termios-document-callback-more-clearly.patch
revert-keyspan-init-termios-properly.patch
git-arm.patch
git-libata-all.patch
pata_hpt37x-fix-outstanding-bug-reports-on-the-hpt374-and-37x-cable-detect-checkpatch-fixes.patch
libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes.patch
libata-fix-ata_acpi_gtm_xfermask.patch
libata-implement-ata_timing_cycle2mode-and-use-it-in-libata-acpi-and-pata_acpi.patch
libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
libata-add-ata_cbl_pata_ign.patch
pata_amd-update-mode-selection-for-nv-patas.patch
ahci-invalid-use-of-writel-readl-with-iomap.patch
libata-core-list-more-documentation-sources-for-reference.patch
libata-iordy-handling.patch
libata-sff-tf_load.patch
pata_ali-add-mitac-8317-and-derivatives.patch
pata_ali-lots-of-problems-still-showing-up-with-small-atapi-dma.patch
pata_hpt37x-fix-cable-detect-bug-spotted-by-sergei.patch
pata_isapnp-polled-devices.patch
pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards.patch
pata_ninja32-cardbus-ata-initial-support.patch
pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch
pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch
serial-keep-the-dtr-setting-for-serial-console.patch
quirk_vialatency-omit-reading-pci-revision-id.patch
quirk_vialatency-omit-reading-pci-revision-id-checkpatch-fixes.patch
git-scsi-rc-fixes.patch
initio-fix-conflict-when-loading-driver.patch
pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
geode-lists-are-subscriber-only.patch
tty-kill-tty_flipbuf_size.patch
drivers-edac-turnon-edac-device-error-logging.patch
drivers-edac-use-round_jiffies_relative.patch
drivers-edac-add-cell-xdr-memory-types.patch
drivers-edac-add-cell-mc-driver.patch
drivers-edac-i3000-code-tidying.patch
drivers-edac-i3000-replace-macros-with-functions.patch
drivers-edac-add-freescale-mpc85xx-driver.patch
drivers-edac-add-marvell-mv64x60-driver.patch
drivers-edac-add-marvell-mv64x60-driver-fix.patch
dz-clean-up-and-improve-the-setup-of-termios-settings.patch
char-rocket-switch-long-delay-to-sleep.patch
char-rocket-printk-cleanup.patch
char-char-serial-remove-serial_type_normal-redefines.patch
char-mxser_new-ioaddresses-are-ulong.patch
char-stallion-fix-compiler-warnings.patch
char-riscom8-change-rc_init_drivers-prototype.patch
tty-add-the-new-termios2-ioctls-to-the-compatible.patch
tty-let-architectures-override-the-user-kernel-macros.patch
tty-s390-support-for-termios2.patch
moxa-first-pass-at-termios-reporting.patch
n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch
rocket-first-pass-at-termios-reporting.patch
rocket-dont-let-random-users-reset-the-controller.patch
tty_audit-fix-checkpatch-complaint.patch
tty_io-drag-screaming-into-coding-style-compliance.patch
tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch
8250_early-coding-style.patch
8250_gsc-coding-style.patch
8250_hp300-coding-style.patch
8250_hub6-codding-style.patch
8250_pci-coding-style.patch
serial8250-coding-style.patch
8250-enable-rate-reporting-via-termios.patch
serial_core-bring-mostly-into-line-with-coding-style.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
