The patch titled
mips: remove dead config symbols from MIPS code
has been added to the -mm tree. Its filename is
mips-remove-dead-config-symbols-from-mips-code.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: mips: remove dead config symbols from MIPS code
From: Jiri Olsa <olsajiri@xxxxxxxxx>
remove dead config symbols from MIPS code
Signed-off-by: Jiri Olsa <olsajiri@xxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
include/asm-mips/pmc-sierra/msp71xx/msp_regs.h | 4 ---
include/asm-mips/sibyte/board.h | 1
include/asm-mips/sibyte/swarm.h | 12 ----------
include/asm-mips/sn/addrs.h | 2 -
include/asm-mips/sn/agent.h | 4 ---
include/asm-mips/sn/klconfig.h | 18 ---------------
6 files changed, 2 insertions(+), 39 deletions(-)
diff -puN include/asm-mips/pmc-sierra/msp71xx/msp_regs.h~mips-remove-dead-config-symbols-from-mips-code include/asm-mips/pmc-sierra/msp71xx/msp_regs.h
--- a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h~mips-remove-dead-config-symbols-from-mips-code
+++ a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h
@@ -585,11 +585,7 @@
* UART defines *
***************************************************************************
*/
-#ifndef CONFIG_MSP_FPGA
#define MSP_BASE_BAUD 25000000
-#else
-#define MSP_BASE_BAUD 6000000
-#endif
#define MSP_UART_REG_LEN 0x20
/*
diff -puN include/asm-mips/sibyte/board.h~mips-remove-dead-config-symbols-from-mips-code include/asm-mips/sibyte/board.h
--- a/include/asm-mips/sibyte/board.h~mips-remove-dead-config-symbols-from-mips-code
+++ a/include/asm-mips/sibyte/board.h
@@ -20,7 +20,6 @@
#define _SIBYTE_BOARD_H
#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
- defined(CONFIG_SIBYTE_PT1120) || defined(CONFIG_SIBYTE_PT1125) || \
defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
defined(CONFIG_SIBYTE_LITTLESUR)
#include <asm/sibyte/swarm.h>
diff -puN include/asm-mips/sibyte/swarm.h~mips-remove-dead-config-symbols-from-mips-code include/asm-mips/sibyte/swarm.h
--- a/include/asm-mips/sibyte/swarm.h~mips-remove-dead-config-symbols-from-mips-code
+++ a/include/asm-mips/sibyte/swarm.h
@@ -32,18 +32,6 @@
#define SIBYTE_HAVE_IDE 1
#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
#endif
-#ifdef CONFIG_SIBYTE_PT1120
-#define SIBYTE_BOARD_NAME "PT1120"
-#define SIBYTE_HAVE_PCMCIA 1
-#define SIBYTE_HAVE_IDE 1
-#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
-#endif
-#ifdef CONFIG_SIBYTE_PT1125
-#define SIBYTE_BOARD_NAME "PT1125"
-#define SIBYTE_HAVE_PCMCIA 1
-#define SIBYTE_HAVE_IDE 1
-#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
-#endif
#ifdef CONFIG_SIBYTE_LITTLESUR
#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
#define SIBYTE_HAVE_PCMCIA 0
diff -puN include/asm-mips/sn/addrs.h~mips-remove-dead-config-symbols-from-mips-code include/asm-mips/sn/addrs.h
--- a/include/asm-mips/sn/addrs.h~mips-remove-dead-config-symbols-from-mips-code
+++ a/include/asm-mips/sn/addrs.h
@@ -19,8 +19,6 @@
#if defined(CONFIG_SGI_IP27)
#include <asm/sn/sn0/addrs.h>
-#elif defined(CONFIG_SGI_IP35)
-#include <asm/sn/sn1/addrs.h>
#endif
diff -puN include/asm-mips/sn/agent.h~mips-remove-dead-config-symbols-from-mips-code include/asm-mips/sn/agent.h
--- a/include/asm-mips/sn/agent.h~mips-remove-dead-config-symbols-from-mips-code
+++ a/include/asm-mips/sn/agent.h
@@ -17,9 +17,7 @@
#if defined(CONFIG_SGI_IP27)
#include <asm/sn/sn0/hub.h>
-#elif defined(CONFIG_SGI_IP35)
-#include <asm/sn/sn1/hub.h>
-#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+#endif /* !CONFIG_SGI_IP27 */
/*
* NIC register macros
diff -puN include/asm-mips/sn/klconfig.h~mips-remove-dead-config-symbols-from-mips-code include/asm-mips/sn/klconfig.h
--- a/include/asm-mips/sn/klconfig.h~mips-remove-dead-config-symbols-from-mips-code
+++ a/include/asm-mips/sn/klconfig.h
@@ -40,26 +40,10 @@
//#include <sys/graph.h>
//#include <sys/xtalk/xbow.h>
-#elif defined(CONFIG_SGI_IP35)
-
-#include <asm/sn/sn1/addrs.h>
-#include <sys/sn/router.h>
-#include <sys/graph.h>
-#include <asm/xtalk/xbow.h>
-
-#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
-
-#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
#include <asm/sn/agent.h>
#include <asm/fw/arc/types.h>
#include <asm/fw/arc/hinv.h>
-#if defined(CONFIG_SGI_IP35)
-// The hack file has to be before vector and after sn0_fru....
-#include <asm/hack.h>
-#include <asm/sn/vector.h>
-#include <asm/xtalk/xtalk.h>
-#endif /* CONFIG_SGI_IP35 */
-#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+#endif /* CONFIG_SGI_IP27 */
typedef u64 nic_t;
_
Patches currently in -mm which might be from olsajiri@xxxxxxxxx are
arm-remove-dead-config-symbols-from-arm-code.patch
m32r-remove-dead-config-symbols-from-m32r-code.patch
mips-remove-dead-config-symbols-from-mips-code.patch
git-net.patch
drivers-serial-s3c2410c-remove-dead-config-symbols.patch
git-sh.patch
frv-remove-dead-config-symbol-from-frv-code.patch
m68knomu-remove-dead-config-symbols-from-m68knomu-code.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
