The patch titled
atmel_serial build warnings begone
has been added to the -mm tree. Its filename is
atmel_serial-build-warnings-begone.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: atmel_serial build warnings begone
From: David Brownell <david-b@xxxxxxxxxxx>
Remove annoying build warnings about unused variables in atmel_serial,
which afflict both AT91 and AVR32 builds.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
Cc: Andrew Victor <andrew@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/serial/atmel_serial.c | 9 ---------
1 file changed, 9 deletions(-)
diff -puN drivers/serial/atmel_serial.c~atmel_serial-build-warnings-begone drivers/serial/atmel_serial.c
--- a/drivers/serial/atmel_serial.c~atmel_serial-build-warnings-begone
+++ a/drivers/serial/atmel_serial.c
@@ -204,8 +204,6 @@ static u_int atmel_get_mctrl(struct uart
*/
static void atmel_stop_tx(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
UART_PUT_IDR(port, ATMEL_US_TXRDY);
}
@@ -214,8 +212,6 @@ static void atmel_stop_tx(struct uart_po
*/
static void atmel_start_tx(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
UART_PUT_IER(port, ATMEL_US_TXRDY);
}
@@ -224,8 +220,6 @@ static void atmel_start_tx(struct uart_p
*/
static void atmel_stop_rx(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
UART_PUT_IDR(port, ATMEL_US_RXRDY);
}
@@ -409,7 +403,6 @@ static irqreturn_t atmel_interrupt(int i
*/
static int atmel_startup(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
int retval;
/*
@@ -456,8 +449,6 @@ static int atmel_startup(struct uart_por
*/
static void atmel_shutdown(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
/*
* Disable all interrupts, port and break condition.
*/
_
Patches currently in -mm which might be from david-b@xxxxxxxxxxx are
rtc_hctosys-expects-rtcs-in-utc-doc.patch
rtcs-handle-nvram-better.patch
rtc-ds1307-exports-nvram.patch
rtc-tweak-driver-documentation-for-rtc-periodic.patch
spi-fix-double-free-on-spi_unregister_master.patch
spi-fix-error-paths-on-txx9spi_probe.patch
atmel_serial-build-warnings-begone.patch
rtc-dont-write-rtc-century-when-setting-a-wake-alarm.patch
git-arm-master.patch
usb-s3c2410_udc-minor-irq-handler-cleanups.patch
rtc-release-correct-region-in-error-path.patch
rtc-fallback-to-requesting-only-the-ports-we-actually-use.patch
tle62x0-driver-stops-ignoring-read-errors.patch
rtc-convert-mutex-to-bitfield.patch
drivers-pmc-msp71xx-gpio-char-driver.patch
remove-pointless-casts-from-void-pointers.patch
spi-at25-driver-is-for-eeprom-not-flash.patch
spi-use-mutex-not-semaphore.patch
blackfin-spi-driver-use-cpu_relax-to-replace-continue-in-while-busywait.patch
blackfin-spi-driver-use-void-__iomem-for-regs_base.patch
blackfin-spi-driver-move-hard-coded-pin_req-to-board-file.patch
blackfin-spi-driver-reconfigure-speed_hz-and-bits_per_word-in-each-spi-transfer.patch
cosmetic-fixes-to-rtc-subsystems-kconfig.patch
rtc-pcf8583-dont-abuse-i2c_m_nostart.patch
rtc-s3c-use-is_power_of_2-macro-for-simplicity.patch
pnp-request-ioport-and-iomem-resources-used-by-active-devices.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
