The patch titled
spi: fix error paths on txx9spi_probe
has been added to the -mm tree. Its filename is
spi-fix-error-paths-on-txx9spi_probe.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: spi: fix error paths on txx9spi_probe
From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
Some error paths in txx9spi_probe wrongly return 0. This patch fixes them by
using the devres interfaces.
Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
Cc: David Brownell <david-b@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi_txx9.c | 40 +++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff -puN drivers/spi/spi_txx9.c~spi-fix-error-paths-on-txx9spi_probe drivers/spi/spi_txx9.c
--- a/drivers/spi/spi_txx9.c~spi-fix-error-paths-on-txx9spi_probe
+++ a/drivers/spi/spi_txx9.c
@@ -24,6 +24,7 @@
#include <linux/spi/spi.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <asm/gpio.h>
@@ -74,7 +75,6 @@ struct txx9spi {
struct list_head queue;
wait_queue_head_t waitq;
void __iomem *membase;
- int irq;
int baseclk;
struct clk *clk;
u32 max_speed_hz, min_speed_hz;
@@ -350,12 +350,12 @@ static int __init txx9spi_probe(struct p
struct resource *res;
int ret = -ENODEV;
u32 mcr;
+ int irq;
master = spi_alloc_master(&dev->dev, sizeof(*c));
if (!master)
return ret;
c = spi_master_get_devdata(master);
- c->irq = -1;
platform_set_drvdata(dev, master);
INIT_WORK(&c->work, txx9spi_work);
@@ -381,32 +381,36 @@ static int __init txx9spi_probe(struct p
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res)
- goto exit;
- c->membase = ioremap(res->start, res->end - res->start + 1);
+ goto exit_busy;
+ if (!devm_request_mem_region(&dev->dev,
+ res->start, res->end - res->start + 1,
+ "spi_txx9"))
+ goto exit_busy;
+ c->membase = devm_ioremap(&dev->dev,
+ res->start, res->end - res->start + 1);
if (!c->membase)
- goto exit;
+ goto exit_busy;
/* enter config mode */
mcr = txx9spi_rd(c, TXx9_SPMCR);
mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
- c->irq = platform_get_irq(dev, 0);
- if (c->irq < 0)
- goto exit;
- ret = request_irq(c->irq, txx9spi_interrupt, 0, dev->name, c);
- if (ret) {
- c->irq = -1;
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0)
+ goto exit_busy;
+ ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0,
+ "spi_txx9", c);
+ if (ret)
goto exit;
- }
c->workqueue = create_singlethread_workqueue(master->dev.parent->bus_id);
if (!c->workqueue)
- goto exit;
+ goto exit_busy;
c->last_chipselect = -1;
dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
- (unsigned long long)res->start, c->irq,
+ (unsigned long long)res->start, irq,
(c->baseclk + 500000) / 1000000);
master->bus_num = dev->id;
@@ -418,13 +422,11 @@ static int __init txx9spi_probe(struct p
if (ret)
goto exit;
return 0;
+exit_busy:
+ ret = -EBUSY;
exit:
if (c->workqueue)
destroy_workqueue(c->workqueue);
- if (c->irq >= 0)
- free_irq(c->irq, c);
- if (c->membase)
- iounmap(c->membase);
if (c->clk) {
clk_disable(c->clk);
clk_put(c->clk);
@@ -442,8 +444,6 @@ static int __exit txx9spi_remove(struct
spi_unregister_master(master);
platform_set_drvdata(dev, NULL);
destroy_workqueue(c->workqueue);
- free_irq(c->irq, c);
- iounmap(c->membase);
clk_disable(c->clk);
clk_put(c->clk);
spi_master_put(master);
_
Patches currently in -mm which might be from anemo@xxxxxxxxxxxxx are
origin.patch
rtcs-handle-nvram-better.patch
spi-fix-double-free-on-spi_unregister_master.patch
spi-fix-error-paths-on-txx9spi_probe.patch
clocksource-make-clocksource_mask-bullet-proof.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
