The patch titled
oProfile: op_model_athalon.c support for AMD Family10h (Barcelona) Performance Counters
has been added to the -mm tree. Its filename is
oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: oProfile: op_model_athalon.c support for AMD Family10h (Barcelona) Performance Counters
From: "Barry Kasindorf" <barry.kasindorf@xxxxxxx>
This patch is for controlling the upper 32bits of the event ctrl msrs.
This includes the upper 4 bits of the event select and the Guest Only and
Host Only bits
This patch is necessary to make Event Based Profiling work reliably on a
Family 10h processor
Signed-off-by: Barry Kasindorf <barry.kasindorf@xxxxxxx>
Signed-off-by: Robert Richter <robert.richter@xxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/x86/oprofile/op_model_athlon.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff -puN arch/x86/oprofile/op_model_athlon.c~oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters arch/x86/oprofile/op_model_athlon.c
--- a/arch/x86/oprofile/op_model_athlon.c~oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters
+++ a/arch/x86/oprofile/op_model_athlon.c
@@ -1,6 +1,6 @@
/**
* @file op_model_athlon.h
- * athlon / K7 model-specific MSR operations
+ * athlon / K7 / K8 / Family 10h model-specific MSR operations
*
* @remark Copyright 2002 OProfile authors
* @remark Read the file COPYING
@@ -31,12 +31,16 @@
#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_CLEAR_LO(x) (x &= (1<<21))
+#define CTRL_CLEAR_HI(x) ( x &= 0xfffffcf0 )
#define CTRL_SET_ENABLE(val) (val |= 1<<20)
#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
+#define CTRL_SET_EVENT_HIGH(val,e) (val |= ((e >> 8) & 0xf))
+#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
+#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
static unsigned long reset_value[NUM_COUNTERS];
@@ -70,7 +74,8 @@ static void athlon_setup_ctrs(struct op_
if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
continue;
CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
+ CTRL_CLEAR_LO(low);
+ CTRL_CLEAR_HI(high);
CTRL_WRITE(low, high, msrs, i);
}
@@ -89,12 +94,17 @@ static void athlon_setup_ctrs(struct op_
CTR_WRITE(counter_config[i].count, msrs, i);
CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
+ CTRL_CLEAR_LO(low);
+ CTRL_CLEAR_HI(high);
CTRL_SET_ENABLE(low);
CTRL_SET_USR(low, counter_config[i].user);
CTRL_SET_KERN(low, counter_config[i].kernel);
CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT(low, counter_config[i].event);
+ CTRL_SET_EVENT_LOW(low, counter_config[i].event);
+ CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
+ CTRL_SET_HOST_ONLY(high, 0);
+ CTRL_SET_GUEST_ONLY(high, 0);
+
CTRL_WRITE(low, high, msrs, i);
} else {
reset_value[i] = 0;
_
Patches currently in -mm which might be from barry.kasindorf@xxxxxxx are
oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
