The patch titled
spi doesn't need class_device
has been removed from the -mm tree. Its filename was
spi-doesnt-need-class_device.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: spi doesn't need class_device
From: Tony Jones <tonyj@xxxxxxx>
Make the SPI framework and drivers stop using class_device. Update docs
accordingly ... highlighting just which sysfs paths should be
"safe"/stable.
Signed-off-by: Tony Jones <tonyj@xxxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/spi/spi-summary | 25 +++++++++++++++-------
drivers/mmc/host/mmc_spi.c | 4 +--
drivers/spi/atmel_spi.c | 14 ++++++------
drivers/spi/mpc52xx_psc_spi.c | 2 -
drivers/spi/pxa2xx_spi.c | 2 -
drivers/spi/spi.c | 36 ++++++++++++++++----------------
drivers/spi/spi_bfin5xx.c | 2 -
drivers/spi/spi_bitbang.c | 2 -
drivers/spi/spi_imx.c | 2 -
drivers/spi/spi_lm70llp.c | 2 -
drivers/spi/spi_txx9.c | 2 -
include/linux/spi/spi.h | 12 +++++-----
12 files changed, 57 insertions(+), 48 deletions(-)
diff -puN Documentation/spi/spi-summary~spi-doesnt-need-class_device Documentation/spi/spi-summary
--- a/Documentation/spi/spi-summary~spi-doesnt-need-class_device
+++ a/Documentation/spi/spi-summary
@@ -156,21 +156,29 @@ using the driver model to connect contro
device tables provided by board specific initialization code. SPI
shows up in sysfs in several locations:
+ /sys/devices/.../CTLR ... physical node for a given SPI controller
+
/sys/devices/.../CTLR/spiB.C ... spi_device on bus "B",
chipselect C, accessed through CTLR.
+ /sys/bus/spi/devices/spiB.C ... symlink to that physical
+ .../CTLR/spiB.C device
+
/sys/devices/.../CTLR/spiB.C/modalias ... identifies the driver
that should be used with this device (for hotplug/coldplug)
- /sys/bus/spi/devices/spiB.C ... symlink to the physical
- spiB.C device
-
/sys/bus/spi/drivers/D ... driver for one or more spi*.* devices
- /sys/class/spi_master/spiB ... class device for the controller
- managing bus "B". All the spiB.* devices share the same
+ /sys/class/spi_master/spiB ... symlink (or actual device node) to
+ a logical node which could hold class related state for the
+ controller managing bus "B". All spiB.* devices share one
physical SPI bus segment, with SCLK, MOSI, and MISO.
+Note that the actual location of the controller's class state depends
+on whether you enabled CONFIG_SYSFS_DEPRECATED or not. At this time,
+the only class-specific state is the bus number ("B" in "spiB"), so
+those /sys/class entries are only useful to quickly identify busses.
+
How does board-specific init code declare SPI devices?
------------------------------------------------------
@@ -337,7 +345,8 @@ SPI protocol drivers somewhat resemble p
The driver core will autmatically attempt to bind this driver to any SPI
device whose board_info gave a modalias of "CHIP". Your probe() code
-might look like this unless you're creating a class_device:
+might look like this unless you're creating a device which is managing
+a bus (appearing under /sys/class/spi_master).
static int __devinit CHIP_probe(struct spi_device *spi)
{
@@ -442,7 +451,7 @@ An SPI controller will probably be regis
a driver to bind to the device, whichever bus is involved.
The main task of this type of driver is to provide an "spi_master".
-Use spi_alloc_master() to allocate the master, and class_get_devdata()
+Use spi_alloc_master() to allocate the master, and spi_master_get_devdata()
to get the driver-private data allocated for that device.
struct spi_master *master;
@@ -452,7 +461,7 @@ to get the driver-private data allocated
if (!master)
return -ENODEV;
- c = class_get_devdata(&master->cdev);
+ c = spi_master_get_devdata(master);
The driver will initialize the fields of that spi_master, including the
bus number (maybe the same as the platform device ID) and three methods
diff -puN drivers/mmc/host/mmc_spi.c~spi-doesnt-need-class_device drivers/mmc/host/mmc_spi.c
--- a/drivers/mmc/host/mmc_spi.c~spi-doesnt-need-class_device
+++ a/drivers/mmc/host/mmc_spi.c
@@ -1280,8 +1280,8 @@ static int mmc_spi_probe(struct spi_devi
if (!host->data)
goto fail_nobuf1;
- if (spi->master->cdev.dev->dma_mask) {
- struct device *dev = spi->master->cdev.dev;
+ if (spi->master->dev.parent->dma_mask) {
+ struct device *dev = spi->master->dev.parent;
host->dma_dev = dev;
host->ones_dma = dma_map_single(dev, ones,
diff -puN drivers/spi/atmel_spi.c~spi-doesnt-need-class_device drivers/spi/atmel_spi.c
--- a/drivers/spi/atmel_spi.c~spi-doesnt-need-class_device
+++ a/drivers/spi/atmel_spi.c
@@ -211,7 +211,7 @@ static void atmel_spi_next_message(struc
msg = list_entry(as->queue.next, struct spi_message, queue);
spi = msg->spi;
- dev_dbg(master->cdev.dev, "start message %p for %s\n",
+ dev_dbg(master->dev.parent, "start message %p for %s\n",
msg, spi->dev.bus_id);
/* select chip if it's not still active */
@@ -266,10 +266,10 @@ static void atmel_spi_dma_unmap_xfer(str
struct spi_transfer *xfer)
{
if (xfer->tx_dma != INVALID_DMA_ADDRESS)
- dma_unmap_single(master->cdev.dev, xfer->tx_dma,
+ dma_unmap_single(master->dev.parent, xfer->tx_dma,
xfer->len, DMA_TO_DEVICE);
if (xfer->rx_dma != INVALID_DMA_ADDRESS)
- dma_unmap_single(master->cdev.dev, xfer->rx_dma,
+ dma_unmap_single(master->dev.parent, xfer->rx_dma,
xfer->len, DMA_FROM_DEVICE);
}
@@ -285,7 +285,7 @@ atmel_spi_msg_done(struct spi_master *ma
list_del(&msg->queue);
msg->status = status;
- dev_dbg(master->cdev.dev,
+ dev_dbg(master->dev.parent,
"xfer complete: %u bytes transferred\n",
msg->actual_length);
@@ -348,7 +348,7 @@ atmel_spi_interrupt(int irq, void *dev_i
if (xfer->delay_usecs)
udelay(xfer->delay_usecs);
- dev_warn(master->cdev.dev, "fifo overrun (%u/%u remaining)\n",
+ dev_warn(master->dev.parent, "fifo overrun (%u/%u remaining)\n",
spi_readl(as, TCR), spi_readl(as, RCR));
/*
@@ -363,7 +363,7 @@ atmel_spi_interrupt(int irq, void *dev_i
if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
break;
if (!timeout)
- dev_warn(master->cdev.dev,
+ dev_warn(master->dev.parent,
"timeout waiting for TXEMPTY");
while (spi_readl(as, SR) & SPI_BIT(RDRF))
spi_readl(as, RDR);
@@ -526,7 +526,7 @@ static int atmel_spi_transfer(struct spi
struct atmel_spi *as;
struct spi_transfer *xfer;
unsigned long flags;
- struct device *controller = spi->master->cdev.dev;
+ struct device *controller = spi->master->dev.parent;
as = spi_master_get_devdata(spi->master);
diff -puN drivers/spi/mpc52xx_psc_spi.c~spi-doesnt-need-class_device drivers/spi/mpc52xx_psc_spi.c
--- a/drivers/spi/mpc52xx_psc_spi.c~spi-doesnt-need-class_device
+++ a/drivers/spi/mpc52xx_psc_spi.c
@@ -503,7 +503,7 @@ static int __init mpc52xx_psc_spi_do_pro
INIT_LIST_HEAD(&mps->queue);
mps->workqueue = create_singlethread_workqueue(
- master->cdev.dev->bus_id);
+ master->dev.parent->bus_id);
if (mps->workqueue == NULL) {
ret = -EBUSY;
goto free_irq;
diff -puN drivers/spi/pxa2xx_spi.c~spi-doesnt-need-class_device drivers/spi/pxa2xx_spi.c
--- a/drivers/spi/pxa2xx_spi.c~spi-doesnt-need-class_device
+++ a/drivers/spi/pxa2xx_spi.c
@@ -1242,7 +1242,7 @@ static int __init init_queue(struct driv
INIT_WORK(&drv_data->pump_messages, pump_messages);
drv_data->workqueue = create_singlethread_workqueue(
- drv_data->master->cdev.dev->bus_id);
+ drv_data->master->dev.parent->bus_id);
if (drv_data->workqueue == NULL)
return -EBUSY;
diff -puN drivers/spi/spi.c~spi-doesnt-need-class_device drivers/spi/spi.c
--- a/drivers/spi/spi.c~spi-doesnt-need-class_device
+++ a/drivers/spi/spi.c
@@ -204,7 +204,7 @@ struct spi_device *spi_new_device(struct
struct spi_board_info *chip)
{
struct spi_device *proxy;
- struct device *dev = master->cdev.dev;
+ struct device *dev = master->dev.parent;
int status;
/* NOTE: caller did any chip->bus_num checks necessary.
@@ -239,7 +239,7 @@ struct spi_device *spi_new_device(struct
proxy->modalias = chip->modalias;
snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
- "%s.%u", master->cdev.class_id,
+ "%s.%u", master->dev.bus_id,
chip->chip_select);
proxy->dev.parent = dev;
proxy->dev.bus = &spi_bus_type;
@@ -338,18 +338,18 @@ static void scan_boardinfo(struct spi_ma
/*-------------------------------------------------------------------------*/
-static void spi_master_release(struct class_device *cdev)
+static void spi_master_release(struct device *dev)
{
struct spi_master *master;
- master = container_of(cdev, struct spi_master, cdev);
+ master = container_of(dev, struct spi_master, dev);
kfree(master);
}
static struct class spi_master_class = {
.name = "spi_master",
.owner = THIS_MODULE,
- .release = spi_master_release,
+ .dev_release = spi_master_release,
};
@@ -357,7 +357,7 @@ static struct class spi_master_class = {
* spi_alloc_master - allocate SPI master controller
* @dev: the controller, possibly using the platform_bus
* @size: how much zeroed driver-private data to allocate; the pointer to this
- * memory is in the class_data field of the returned class_device,
+ * memory is in the driver_data field of the returned device,
* accessible with spi_master_get_devdata().
* Context: can sleep
*
@@ -383,9 +383,9 @@ struct spi_master *spi_alloc_master(stru
if (!master)
return NULL;
- class_device_initialize(&master->cdev);
- master->cdev.class = &spi_master_class;
- master->cdev.dev = get_device(dev);
+ device_initialize(&master->dev);
+ master->dev.class = &spi_master_class;
+ master->dev.parent = get_device(dev);
spi_master_set_devdata(master, &master[1]);
return master;
@@ -415,7 +415,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master);
int spi_register_master(struct spi_master *master)
{
static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
- struct device *dev = master->cdev.dev;
+ struct device *dev = master->dev.parent;
int status = -ENODEV;
int dynamic = 0;
@@ -440,12 +440,12 @@ int spi_register_master(struct spi_maste
/* register the device, then userspace will see it.
* registration fails if the bus ID is in use.
*/
- snprintf(master->cdev.class_id, sizeof master->cdev.class_id,
+ snprintf(master->dev.bus_id, sizeof master->dev.bus_id,
"spi%u", master->bus_num);
- status = class_device_add(&master->cdev);
+ status = device_add(&master->dev);
if (status < 0)
goto done;
- dev_dbg(dev, "registered master %s%s\n", master->cdev.class_id,
+ dev_dbg(dev, "registered master %s%s\n", master->dev.bus_id,
dynamic ? " (dynamic)" : "");
/* populate children from any spi device tables */
@@ -478,8 +478,8 @@ void spi_unregister_master(struct spi_ma
{
int dummy;
- dummy = device_for_each_child(master->cdev.dev, NULL, __unregister);
- class_device_unregister(&master->cdev);
+ dummy = device_for_each_child(master->dev.parent, NULL, __unregister);
+ device_unregister(&master->dev);
}
EXPORT_SYMBOL_GPL(spi_unregister_master);
@@ -495,13 +495,13 @@ EXPORT_SYMBOL_GPL(spi_unregister_master)
*/
struct spi_master *spi_busnum_to_master(u16 bus_num)
{
- struct class_device *cdev;
+ struct device *dev;
struct spi_master *master = NULL;
struct spi_master *m;
down(&spi_master_class.sem);
- list_for_each_entry(cdev, &spi_master_class.children, node) {
- m = container_of(cdev, struct spi_master, cdev);
+ list_for_each_entry(dev, &spi_master_class.children, node) {
+ m = container_of(dev, struct spi_master, dev);
if (m->bus_num == bus_num) {
master = spi_master_get(m);
break;
diff -puN drivers/spi/spi_bfin5xx.c~spi-doesnt-need-class_device drivers/spi/spi_bfin5xx.c
--- a/drivers/spi/spi_bfin5xx.c~spi-doesnt-need-class_device
+++ a/drivers/spi/spi_bfin5xx.c
@@ -1106,7 +1106,7 @@ static inline int init_queue(struct driv
/* init messages workqueue */
INIT_WORK(&drv_data->pump_messages, pump_messages);
drv_data->workqueue =
- create_singlethread_workqueue(drv_data->master->cdev.dev->bus_id);
+ create_singlethread_workqueue(drv_data->master->dev.parent->bus_id);
if (drv_data->workqueue == NULL)
return -EBUSY;
diff -puN drivers/spi/spi_bitbang.c~spi-doesnt-need-class_device drivers/spi/spi_bitbang.c
--- a/drivers/spi/spi_bitbang.c~spi-doesnt-need-class_device
+++ a/drivers/spi/spi_bitbang.c
@@ -472,7 +472,7 @@ int spi_bitbang_start(struct spi_bitbang
/* this task is the only thing to touch the SPI bits */
bitbang->busy = 0;
bitbang->workqueue = create_singlethread_workqueue(
- bitbang->master->cdev.dev->bus_id);
+ bitbang->master->dev.parent->bus_id);
if (bitbang->workqueue == NULL) {
status = -EBUSY;
goto err1;
diff -puN drivers/spi/spi_imx.c~spi-doesnt-need-class_device drivers/spi/spi_imx.c
--- a/drivers/spi/spi_imx.c~spi-doesnt-need-class_device
+++ a/drivers/spi/spi_imx.c
@@ -1374,7 +1374,7 @@ static int __init init_queue(struct driv
INIT_WORK(&drv_data->work, pump_messages);
drv_data->workqueue = create_singlethread_workqueue(
- drv_data->master->cdev.dev->bus_id);
+ drv_data->master->dev.parent->bus_id);
if (drv_data->workqueue == NULL)
return -EBUSY;
diff -puN drivers/spi/spi_lm70llp.c~spi-doesnt-need-class_device drivers/spi/spi_lm70llp.c
--- a/drivers/spi/spi_lm70llp.c~spi-doesnt-need-class_device
+++ a/drivers/spi/spi_lm70llp.c
@@ -82,7 +82,7 @@ struct spi_lm70llp {
struct pardevice *pd;
struct spi_device *spidev_lm70;
struct spi_board_info info;
- struct class_device *cdev;
+ //struct device *dev;
};
/* REVISIT : ugly global ; provides "exclusive open" facility */
diff -puN drivers/spi/spi_txx9.c~spi-doesnt-need-class_device drivers/spi/spi_txx9.c
--- a/drivers/spi/spi_txx9.c~spi-doesnt-need-class_device
+++ a/drivers/spi/spi_txx9.c
@@ -400,7 +400,7 @@ static int __init txx9spi_probe(struct p
goto exit;
}
- c->workqueue = create_singlethread_workqueue(master->cdev.dev->bus_id);
+ c->workqueue = create_singlethread_workqueue(master->dev.parent->bus_id);
if (!c->workqueue)
goto exit;
c->last_chipselect = -1;
diff -puN include/linux/spi/spi.h~spi-doesnt-need-class_device include/linux/spi/spi.h
--- a/include/linux/spi/spi.h~spi-doesnt-need-class_device
+++ a/include/linux/spi/spi.h
@@ -195,7 +195,7 @@ static inline void spi_unregister_driver
/**
* struct spi_master - interface to SPI master controller
- * @cdev: class interface to this driver
+ * @dev: device interface to this driver
* @bus_num: board-specific (and often SOC-specific) identifier for a
* given SPI controller.
* @num_chipselect: chipselects are used to distinguish individual
@@ -222,7 +222,7 @@ static inline void spi_unregister_driver
* message's completion function when the transaction completes.
*/
struct spi_master {
- struct class_device cdev;
+ struct device dev;
/* other than negative (== assign one dynamically), bus_num is fully
* board-specific. usually that simplifies to being SOC-specific.
@@ -268,17 +268,17 @@ struct spi_master {
static inline void *spi_master_get_devdata(struct spi_master *master)
{
- return class_get_devdata(&master->cdev);
+ return dev_get_drvdata(&master->dev);
}
static inline void spi_master_set_devdata(struct spi_master *master, void *data)
{
- class_set_devdata(&master->cdev, data);
+ dev_set_drvdata(&master->dev, data);
}
static inline struct spi_master *spi_master_get(struct spi_master *master)
{
- if (!master || !class_device_get(&master->cdev))
+ if (!master || !get_device(&master->dev))
return NULL;
return master;
}
@@ -286,7 +286,7 @@ static inline struct spi_master *spi_mas
static inline void spi_master_put(struct spi_master *master)
{
if (master)
- class_device_put(&master->cdev);
+ put_device(&master->dev);
}
_
Patches currently in -mm which might be from tonyj@xxxxxxx are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
