The patch titled
pm3fb: mtrr support and noaccel option
has been removed from the -mm tree. Its filename was
pm3fb-mtrr-support-and-noaccel-option.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pm3fb: mtrr support and noaccel option
From: Krzysztof Helt <krzysztof.h1@xxxxx>
This patch adds usage of MTRR registers and two new options: noaccel and
nomtrr.
[bunk@xxxxxxxxxx: make pm3fb_init() static again]
Signed-off-by: Krzysztof Helt <krzysztof.h1@xxxxx>
Signed-off-by: Antonino Daplas <adaplas@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/video/pm2fb.c | 40 ++++++++++++++++++++
drivers/video/pm3fb.c | 80 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 118 insertions(+), 2 deletions(-)
diff -puN drivers/video/pm2fb.c~pm3fb-mtrr-support-and-noaccel-option drivers/video/pm2fb.c
--- a/drivers/video/pm2fb.c~pm3fb-mtrr-support-and-noaccel-option
+++ a/drivers/video/pm2fb.c
@@ -38,6 +38,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
#include <video/permedia2.h>
#include <video/cvisionppc.h>
@@ -73,6 +76,11 @@ static char *mode __devinitdata = NULL;
*/
static int lowhsync;
static int lowvsync;
+static int noaccel __devinitdata;
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
/*
* The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
u32 mem_control; /* MemControl reg at probe */
u32 boot_address; /* BootAddress reg at probe */
u32 palette[16];
+ int mtrr_handle;
};
/*
@@ -1316,6 +1325,15 @@ static int __devinit pm2fb_probe(struct
goto err_exit_mmio;
}
+#ifdef CONFIG_MTRR
+ default_par->mtrr_handle = -1;
+ if (!nomtrr)
+ default_par->mtrr_handle =
+ mtrr_add(pm2fb_fix.smem_start,
+ pm2fb_fix.smem_len,
+ MTRR_TYPE_WRCOMB, 1);
+#endif
+
info->fbops = &pm2fb_ops;
info->fix = pm2fb_fix;
info->pseudo_palette = default_par->palette;
@@ -1324,6 +1342,11 @@ static int __devinit pm2fb_probe(struct
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
+ if (noaccel) {
+ printk(KERN_DEBUG "disabling acceleration\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
+
if (!mode)
mode = "640x480@60";
@@ -1375,6 +1398,11 @@ static void __devexit pm2fb_remove(struc
unregister_framebuffer(info);
+#ifdef CONFIG_MTRR
+ if (par->mtrr_handle >= 0)
+ mtrr_del(par->mtrr_handle, info->fix.smem_start,
+ info->fix.smem_len);
+#endif /* CONFIG_MTRR */
iounmap(info->screen_base);
release_mem_region(fix->smem_start, fix->smem_len);
iounmap(par->v_regs);
@@ -1430,6 +1458,12 @@ static int __init pm2fb_setup(char *opti
lowhsync = 1;
} else if(!strcmp(this_opt, "lowvsync")) {
lowvsync = 1;
+#ifdef CONFIG_MTRR
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
+ nomtrr = 1;
+#endif
+ } else if (!strncmp(this_opt, "noaccel", 7)) {
+ noaccel = 1;
} else {
mode = this_opt;
}
@@ -1474,6 +1508,12 @@ module_param(lowhsync, bool, 0);
MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
module_param(lowvsync, bool, 0);
MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
MODULE_AUTHOR("Jim Hague <jim.hague@xxxxxxx>");
MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
diff -puN drivers/video/pm3fb.c~pm3fb-mtrr-support-and-noaccel-option drivers/video/pm3fb.c
--- a/drivers/video/pm3fb.c~pm3fb-mtrr-support-and-noaccel-option
+++ a/drivers/video/pm3fb.c
@@ -32,6 +32,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
#include <video/pm3fb.h>
@@ -52,6 +55,12 @@
* Driver data
*/
static char *mode_option __devinitdata;
+static int noaccel __devinitdata = 0;
+
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata = 0;
+#endif
/*
* This structure defines the hardware state of the graphics card. Normally
@@ -65,6 +74,7 @@ struct pm3_par {
u32 video; /* video flags before blanking */
u32 base; /* screen base (xoffset+yoffset) in 128 bits unit */
u32 palette[16];
+ int mtrr_handle;
};
/*
@@ -1244,6 +1254,13 @@ static int __devinit pm3fb_probe(struct
}
info->screen_size = pm3fb_fix.smem_len;
+#ifdef CONFIG_MTRR
+ if (!nomtrr) {
+ par->mtrr_handle = mtrr_add(pm3fb_fix.smem_start,
+ pm3fb_fix.smem_len,
+ MTRR_TYPE_WRCOMB, 1);
+ }
+#endif
info->fbops = &pm3fb_ops;
par->video = PM3_READ_REG(par, PM3VideoControl);
@@ -1257,6 +1274,10 @@ static int __devinit pm3fb_probe(struct
FBINFO_HWACCEL_IMAGEBLIT |
FBINFO_HWACCEL_FILLRECT;
+ if (noaccel) {
+ printk(KERN_DEBUG "disabling acceleration\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
info->pixmap.addr = kmalloc(PM3_PIXMAP_SIZE, GFP_KERNEL);
if (!info->pixmap.addr) {
retval = -ENOMEM;
@@ -1330,6 +1351,11 @@ static void __devexit pm3fb_remove(struc
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
+#ifdef CONFIG_MTRR
+ if (par->mtrr_handle >= 0)
+ mtrr_del(par->mtrr_handle, info->fix.smem_start,
+ info->fix.smem_len);
+#endif /* CONFIG_MTRR */
iounmap(info->screen_base);
release_mem_region(fix->smem_start, fix->smem_len);
iounmap(par->v_regs);
@@ -1357,22 +1383,72 @@ static struct pci_driver pm3fb_driver =
MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
+#ifndef MODULE
+ /*
+ * Setup
+ */
+
+/*
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+static int __init pm3fb_setup(char *options)
+{
+ char *this_opt;
+
+ /* Parse user speficied options (`video=pm3fb:') */
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!*this_opt)
+ continue;
+ else if (!strncmp(this_opt, "noaccel", 7)) {
+ noaccel = 1;
+#ifdef CONFIG_MTRR
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
+ nomtrr = 1;
+#endif
+ } else {
+ mode_option = this_opt;
+ }
+ }
+ return 0;
+}
+#endif /* MODULE */
+
static int __init pm3fb_init(void)
{
+ /*
+ * For kernel boot options (in 'video=pm3fb:<options>' format)
+ */
#ifndef MODULE
- if (fb_get_options("pm3fb", NULL))
+ char *option = NULL;
+
+ if (fb_get_options("pm3fb", &option))
return -ENODEV;
+ pm3fb_setup(option);
#endif
+
return pci_register_driver(&pm3fb_driver);
}
+#ifdef MODULE
static void __exit pm3fb_exit(void)
{
pci_unregister_driver(&pm3fb_driver);
}
-module_init(pm3fb_init);
module_exit(pm3fb_exit);
+#endif
+module_init(pm3fb_init);
+
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
MODULE_LICENSE("GPL");
_
Patches currently in -mm which might be from krzysztof.h1@xxxxx are
origin.patch
git-alsa.patch
cyber2000fb-checkpatch-fixes.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
