The patch titled
s3c2410fb: make use of default_display settings
has been removed from the -mm tree. Its filename was
s3c2410fb-make-use-of-default_display-settings.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: s3c2410fb: make use of default_display settings
From: Krzysztof Helt <krzysztof.h1@xxxxx>
This patch changes mode selection to always prefer default mode if possible
and always honor type of display set by default mode settings.
This patch is required in case the same display modes were defined for
different panels (e.g. STN and TFT).
Signed-off-by: Krzysztof Helt <krzysztof.h1@xxxxx>
Signed-off-by: Antonino Daplas <adaplas@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/video/s3c2410fb.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff -puN drivers/video/s3c2410fb.c~s3c2410fb-make-use-of-default_display-settings drivers/video/s3c2410fb.c
--- a/drivers/video/s3c2410fb.c~s3c2410fb-make-use-of-default_display-settings
+++ a/drivers/video/s3c2410fb.c
@@ -172,19 +172,28 @@ static int s3c2410fb_check_var(struct fb
struct s3c2410fb_info *fbi = info->par;
struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
struct s3c2410fb_display *display = NULL;
+ struct s3c2410fb_display *default_display = mach_info->displays +
+ mach_info->default_display;
+ int type = default_display->type;
unsigned i;
dprintk("check_var(var=%p, info=%p)\n", var, info);
/* validate x/y resolution */
-
- for (i = 0; i < mach_info->num_displays; i++)
- if (var->yres == mach_info->displays[i].yres &&
- var->xres == mach_info->displays[i].xres &&
- var->bits_per_pixel == mach_info->displays[i].bpp) {
- display = mach_info->displays + i;
- break;
- }
+ /* choose default mode if possible */
+ if (var->yres == default_display->yres &&
+ var->xres == default_display->xres &&
+ var->bits_per_pixel == default_display->bpp)
+ display = default_display;
+ else
+ for (i = 0; i < mach_info->num_displays; i++)
+ if (type == mach_info->displays[i].type &&
+ var->yres == mach_info->displays[i].yres &&
+ var->xres == mach_info->displays[i].xres &&
+ var->bits_per_pixel == mach_info->displays[i].bpp) {
+ display = mach_info->displays + i;
+ break;
+ }
if (!display) {
dprintk("wrong resolution or depth %dx%d at %d bpp\n",
_
Patches currently in -mm which might be from krzysztof.h1@xxxxx are
origin.patch
git-alsa.patch
cyber2000fb-checkpatch-fixes.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
