The patch titled
serial_txx9: Use UPF_FIXED_PORT
has been removed from the -mm tree. Its filename was
serial_txx9-use-upf_fixed_port.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: serial_txx9: Use UPF_FIXED_PORT
From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
The UPF_FIXED_PORT flags was introduced in 2.6.22 and it can be used
instead of the driver specific verify_port routine.
Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/serial/serial_txx9.c | 26 +++++---------------------
1 file changed, 5 insertions(+), 21 deletions(-)
diff -puN drivers/serial/serial_txx9.c~serial_txx9-use-upf_fixed_port drivers/serial/serial_txx9.c
--- a/drivers/serial/serial_txx9.c~serial_txx9-use-upf_fixed_port
+++ a/drivers/serial/serial_txx9.c
@@ -33,7 +33,7 @@
#include <asm/io.h>
-static char *serial_version = "1.10";
+static char *serial_version = "1.11";
static char *serial_name = "TX39/49 Serial driver";
#define PASS_LIMIT 256
@@ -64,8 +64,6 @@ static char *serial_name = "TX39/49 Seri
*/
#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-
struct uart_txx9_port {
struct uart_port port;
/* No additional info for now */
@@ -752,21 +750,6 @@ static void serial_txx9_config_port(stru
serial_txx9_initialize(port);
}
-static int
-serial_txx9_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- unsigned long new_port = ser->port;
- if (HIGH_BITS_OFFSET)
- new_port += (unsigned long)ser->port_high << HIGH_BITS_OFFSET;
- if (ser->type != port->type ||
- ser->irq != port->irq ||
- ser->io_type != port->iotype ||
- new_port != port->iobase ||
- (unsigned long)ser->iomem_base != port->mapbase)
- return -EINVAL;
- return 0;
-}
-
static const char *
serial_txx9_type(struct uart_port *port)
{
@@ -790,7 +773,6 @@ static struct uart_ops serial_txx9_pops
.release_port = serial_txx9_release_port,
.request_port = serial_txx9_request_port,
.config_port = serial_txx9_config_port,
- .verify_port = serial_txx9_verify_port,
};
static struct uart_txx9_port serial_txx9_ports[UART_NR];
@@ -946,7 +928,8 @@ int __init early_serial_txx9_setup(struc
serial_txx9_ports[port->line].port = *port;
serial_txx9_ports[port->line].port.ops = &serial_txx9_pops;
- serial_txx9_ports[port->line].port.flags |= UPF_BOOT_AUTOCONF;
+ serial_txx9_ports[port->line].port.flags |=
+ UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
return 0;
}
@@ -991,7 +974,8 @@ static int __devinit serial_txx9_registe
uart->port.irq = port->irq;
uart->port.uartclk = port->uartclk;
uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.flags = port->flags
+ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
uart->port.mapbase = port->mapbase;
if (port->dev)
uart->port.dev = port->dev;
_
Patches currently in -mm which might be from anemo@xxxxxxxxxxxxx are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
