The patch titled
fbcon: Convert struct font_desc to use ISO C initializers (update)
has been removed from the -mm tree. Its filename was
fbcon-convert-struct-font_desc-to-use-iso-c-initializers-update.patch
This patch was dropped because it was folded into fbcon-convert-struct-font_desc-to-use-iso-c-initializers.patch
------------------------------------------------------
Subject: fbcon: Convert struct font_desc to use ISO C initializers (update)
From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Akpm's patch "newport_con warning fix" got me to look at the console
drivers again and one thing that I noticed was that none of the fonts
was using ISO initializers for it's fonts.
Signed-off-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Signed-off-by: Antonino Daplas <adaplas@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/video/backlight/cr_bllcd.c | 146 +--------------------------
1 files changed, 10 insertions(+), 136 deletions(-)
diff -puN drivers/video/backlight/cr_bllcd.c~fbcon-convert-struct-font_desc-to-use-iso-c-initializers-update drivers/video/backlight/cr_bllcd.c
--- a/drivers/video/backlight/cr_bllcd.c~fbcon-convert-struct-font_desc-to-use-iso-c-initializers-update
+++ a/drivers/video/backlight/cr_bllcd.c
@@ -25,7 +25,6 @@
* Authors:
* Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
* Alan Hourihane <alanh-at-tungstengraphics-dot-com>
- * Michel Dänzer <michel-at-tungstengraphics-dot-com>
*/
#include <linux/module.h>
@@ -39,8 +38,6 @@
#include <linux/pci.h>
#include <asm/uaccess.h>
-#define MODULE_NAME "cr_bllcd"
-
/* The LVDS- and panel power controls sits on the
* GPIO port of the ISA bridge.
*/
@@ -54,25 +51,19 @@
#define CRVML_PANEL_ON 0x00000002
#define CRVML_BACKLIGHT_OFF 0x00000004
+/* The PLL Clock register sits on Host bridge */
+#define CRVML_DEVICE_MCH 0x5001
+#define CRVML_REG_MCHBAR 0x44
+#define CRVML_REG_MCHEN 0x54
+#define CRVML_MCHEN_BIT (1 << 28)
+#define CRVML_MCHMAP_SIZE 4096
+#define CRVML_REG_CLOCK 0xc3c
+#define CRVML_CLOCK_SHIFT 8
+#define CRVML_CLOCK_MASK 0x00000f00
+
static struct pci_dev *lpc_dev;
static u32 gpio_bar;
-#ifdef CONFIG_PM
-
-#define NUM_LPC_EXTRA_CONFIG_SPACE 45
-static int lpc_saved_config_space[NUM_LPC_EXTRA_CONFIG_SPACE];
-
-#define CRVML_REG_RCBABAR 0xF0
-#define CRVML_RCBAEN_BIT (1 << 0)
-#define CRVML_RCBAMAP_SIZE 16384
-static u32 rcba_bar;
-static void __iomem *rcba_regs_base;
-
-#define REGSAVE_SIZE (CRVML_RCBAMAP_SIZE + 4)
-static u32 *regsave;
-
-#endif /* CONFIG_PM */
-
struct cr_panel {
struct backlight_device *cr_backlight_device;
struct lcd_device *cr_lcd_device;
@@ -178,94 +169,6 @@ static struct lcd_ops cr_lcd_ops = {
.set_power = cr_lcd_set_power,
};
-#ifdef CONFIG_PM
-
-static int cr_backlight_suspend(struct platform_device *pdev,
- pm_message_t state)
-{
- int i;
- int reg;
- int saveidx = 0;
-
- printk(KERN_DEBUG MODULE_NAME ": suspending to state: %d\n",
- state.event);
-
- regsave = kmalloc(REGSAVE_SIZE, GFP_ATOMIC);
-
- if (!regsave) {
- printk(KERN_ERR MODULE_NAME
- ": Could not allocate %d bytes for saving registers\n",
- REGSAVE_SIZE);
- return -ENOMEM;
- }
-
- /* Save registers and config space */
-
- regsave[saveidx++] = inl(gpio_bar + CRVML_PANEL_PORT);
-
- for (reg = 0; reg < CRVML_RCBAMAP_SIZE; reg += 4)
- regsave[saveidx++] = ioread32(rcba_regs_base + reg);
-
- pci_save_state(lpc_dev);
- for (i = 0; i < NUM_LPC_EXTRA_CONFIG_SPACE; i++)
- pci_read_config_dword(lpc_dev, (i + 16) * 4,
- &lpc_saved_config_space[i]);
- pci_disable_device(lpc_dev);
- pci_set_power_state(lpc_dev, pci_choose_state(lpc_dev, state));
-
- pdev->dev.power.power_state = state;
-
- return 0;
-}
-
-static int cr_backlight_resume(struct platform_device *pdev)
-{
- int i;
- int reg;
- int val;
- int restoreidx = 0;
-
- if (pdev->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
- pci_set_power_state(lpc_dev, PCI_D0);
- pci_restore_state(lpc_dev);
- for (i = 0; i < NUM_LPC_EXTRA_CONFIG_SPACE; i++) {
- if (i == 0x70 / 4)
- continue;
-
- pci_read_config_dword(lpc_dev, (i + 16) * 4, &val);
- if (val != lpc_saved_config_space[i]) {
- printk(KERN_DEBUG MODULE_NAME ": Writing back config "
- "space on device %s at offset %x (was %x, "
- "writing %x)\n", pci_name(lpc_dev), (i + 16),
- val, lpc_saved_config_space[i]);
- pci_write_config_dword(lpc_dev, (i + 16) * 4,
- lpc_saved_config_space[i]);
- }
- }
- if (pci_enable_device(lpc_dev))
- return -1;
-
- outl(regsave[restoreidx++], gpio_bar + CRVML_PANEL_PORT);
-
- for (reg = 0; reg < CRVML_RCBAMAP_SIZE; reg += 4)
- iowrite32(regsave[restoreidx++], rcba_regs_base + reg);
-
- /* Flush posted writes */
- ioread32(rcba_regs_base);
-
- kfree(regsave);
-
- pdev->dev.power.power_state = PMSG_ON;
-
- printk(KERN_DEBUG MODULE_NAME ": resumed\n");
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
static int cr_backlight_probe(struct platform_device *pdev)
{
struct backlight_device *bdp;
@@ -325,26 +228,6 @@ static int cr_backlight_probe(struct pla
platform_set_drvdata(pdev, crp);
-#ifdef CONFIG_PM
- pci_read_config_dword(lpc_dev, CRVML_REG_RCBABAR, &rcba_bar);
-
- if (!(rcba_bar & CRVML_RCBAEN_BIT)) {
- printk(KERN_ERR MODULE_NAME
- ": Carillo Ranch LPC device RCBA BAR was not enabled\n");
- pci_dev_put(lpc_dev);
- return -ENODEV;
- }
-
- rcba_regs_base =
- ioremap_nocache(rcba_bar, CRVML_RCBAMAP_SIZE);
- if (!rcba_regs_base) {
- printk(KERN_ERR MODULE_NAME
- ": Could not map Carillo Ranch RCBA BAR\n");
- pci_dev_put(lpc_dev);
- return -ENODEV;
- }
-#endif /* CONFIG_PM */
-
return 0;
}
@@ -358,11 +241,6 @@ static int cr_backlight_remove(struct pl
cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
backlight_device_unregister(crp->cr_backlight_device);
lcd_device_unregister(crp->cr_lcd_device);
- platform_set_drvdata(pdev, NULL);
-#ifdef CONFIG_PM
- iounmap(rcba_regs_base);
-#endif
- kfree(crp);
pci_dev_put(lpc_dev);
return 0;
@@ -374,10 +252,6 @@ static struct platform_driver cr_backlig
.driver = {
.name = "cr_backlight",
},
-#ifdef CONFIG_PM
- .suspend = cr_backlight_suspend,
- .resume = cr_backlight_resume,
-#endif
};
static struct platform_device *crp;
_
Patches currently in -mm which might be from ralf@xxxxxxxxxxxxxx are
origin.patch
add-assembler-equivalents-to-__initdate_refok.patch
move-a-few-definitions-to-au1000_xxs1500c.patch
serial_txx9-cleanup-includes.patch
during-vm-oom-condition-kill-all-threads-in-process-group.patch
rtc-make-rtc-ds1742-driver-hotplug-aware-take-2.patch
fbcon-convert-struct-font_desc-to-use-iso-c-initializers.patch
fbcon-convert-struct-font_desc-to-use-iso-c-initializers-update.patch
vt-fix-warnings-in-selectionh.patch
export-font_vga_8x16.patch
drivers-video-pmag-ba-fbc-improve-diagnostics.patch
drivers-video-pmag-ba-fbc-improve-diagnostics-fix.patch
add-a-00-index-file-to-documentation-mips.patch
define-global-bit-macro.patch
bitops-introduce-lock-ops.patch
mips-fix-bitops.patch
mips-lock-bitops.patch
replace-__attribute_pure__-with-__pure.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
