The patch titled
keyspan termios tidy
has been added to the -mm tree. Its filename is
keyspan-termios-tidy.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: keyspan termios tidy
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Clear unsupported CMSPAR bit
- Clean up long chains of a->b-> a bit
- Encode baud rate back into tty structure properly
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
diff -puN drivers/usb/serial/keyspan.c~keyspan-termios-tidy drivers/usb/serial/keyspan.c
--- a/drivers/usb/serial/keyspan.c~keyspan-termios-tidy
+++ a/drivers/usb/serial/keyspan.c
@@ -278,29 +278,35 @@ static void keyspan_set_termios (struct
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
unsigned int cflag;
+ struct tty_struct *tty = port->tty;
dbg("%s", __FUNCTION__);
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
- cflag = port->tty->termios->c_cflag;
+ cflag = tty->termios->c_cflag;
device_port = port->number - port->serial->minor;
/* Baud rate calculation takes baud rate as an integer
so other rates can be generated if desired. */
- baud_rate = tty_get_baud_rate(port->tty);
+ baud_rate = tty_get_baud_rate(tty);
/* If no match or invalid, don't change */
- if (baud_rate >= 0
- && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+ if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
/* FIXME - more to do here to ensure rate changes cleanly */
+ /* FIXME - calcuate exact rate from divisor ? */
p_priv->baud = baud_rate;
- }
+ } else
+ baud_rate = tty_termios_baud_rate(old_termios);
+ tty_encode_baud_rate(tty, baud_rate, baud_rate);
/* set CTS/RTS handshake etc. */
p_priv->cflag = cflag;
p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
+ /* Mark/Space not supported */
+ tty->termios->c_cflag &= ~CMSPAR;
+
keyspan_send_setup(port, 0);
}
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
git-libata-all.patch
pata_acpi-rework-the-acpi-drivers-based-upon-experience.patch
pata_acpi-use-ata_sff_port_start.patch
libata-correct-handling-of-srst-reset-sequences.patch
libata-add-a-drivers-ide-style-dma-disable.patch
ata-pata_marvell-use-ioread-for-iomap-ped-memory.patch
drivers-ata-pata_ixp4xx_cfc-ioremap-return-code-check.patch
libata-add-a-horkage-entry-for-drq-mishandling-atapi.patch
pata_pdc202xx_old-fix-timings.patch
pata_ns87415-initial-cut-at-87415-87560-ide-support.patch
fix-hpa-handling-regression.patch
libata_scsi-fix-transfer-lengths.patch
pata_atiixp-audit-notes-on-locking.patch
pata_hpt3x2n-clean-up-dpll-stuff.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
introduce-dma_mask_none-as-a-signal-for-unable-to-do.patch
pcmcia-use-dma_mask_none-for-the-default-for-all.patch
serial_txx9-cleanup-includes.patch
serial-keep-the-dtr-setting-for-serial-console.patch
8250_pci-autodetect-mainpine-cards.patch
8250_pci-autodetect-mainpine-cards-fix.patch
wake-up-from-a-serial-port.patch
fix-ide-legacy-mode-resources.patch
fix-ide-legacy-mode-resources-fix.patch
git-scsi-misc.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
security-convert-lsm-into-a-static-interface-vs-fix-null-pointer-dereference-in-__vm_enough_memory.patch
blackfin-enable-arbitary-speed-serial-setting.patch
tty-bring-the-old-cris-driver-back-somewhere-into-the.patch
mxser-remove-use-of-dead-tty_flipbuf_size-definition.patch
jsm-remove-further-unneeded-crud.patch
ttyh-remove-dead-define.patch
codingstyle-relax-the-80-cole-rule.patch
add-config_vt_unicode.patch
keys-missing-word-in-documentation.patch
ide-cd-is-unmaintained.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios-fix.patch
sysctl-remove-broken-cdrom-binary-sysctls.patch
mxser-remove-commented-crap.patch
char-cyclades-remove-bottom-half-processing.patch
usb_serial-stop-passing-null-to-functions-that-expect-data.patch
ark3116-update-termios-handling.patch
usb-serial-kill-another-case-we-pass-null-and-shouldnt.patch
ch341-fix-termios-handling.patch
digi_acceleport-fix-termios-and-also-readability-a-bit.patch
empeg-clean-up-and-handle-speeds.patch
funsoft-fix-termios.patch
ir_usb-termios-handling.patch
keyspan-termios-tidy.patch
kobil_sct-termios-encoding-fixups.patch
option-termios-handling.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
