The patch titled
digi_acceleport: fix termios and also readability a bit
has been added to the -mm tree. Its filename is
digi_acceleport-fix-termios-and-also-readability-a-bit.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: digi_acceleport: fix termios and also readability a bit
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Expand some x&y to x & y so I could read it when checking
- Clear CMSPAR bit in the termios (as the driver does not support it)
- Encode the speed using the new tty_encode_baud_rate facility
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
diff -puN drivers/usb/serial/digi_acceleport.c~digi_acceleport-fix-termios-and-also-readability-a-bit drivers/usb/serial/digi_acceleport.c
--- a/drivers/usb/serial/digi_acceleport.c~digi_acceleport-fix-termios-and-also-readability-a-bit
+++ a/drivers/usb/serial/digi_acceleport.c
@@ -973,6 +973,8 @@ static void digi_set_termios(struct usb_
}
}
/* set parity */
+ tty->termios->c_cflag &= ~CMSPAR;
+
if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
if (cflag&PARENB) {
if (cflag&PARODD)
@@ -1054,15 +1056,15 @@ static void digi_set_termios(struct usb_
}
/* set output flow control */
- if ((iflag&IXON) != (old_iflag&IXON)
- || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
+ if ((iflag & IXON) != (old_iflag & IXON)
+ || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
arg = 0;
- if (iflag&IXON)
+ if (iflag & IXON)
arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
else
arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
- if (cflag&CRTSCTS) {
+ if (cflag & CRTSCTS) {
arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
} else {
arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
@@ -1076,8 +1078,8 @@ static void digi_set_termios(struct usb_
}
/* set receive enable/disable */
- if ((cflag&CREAD) != (old_cflag&CREAD)) {
- if (cflag&CREAD)
+ if ((cflag & CREAD) != (old_cflag & CREAD)) {
+ if (cflag & CREAD)
arg = DIGI_ENABLE;
else
arg = DIGI_DISABLE;
@@ -1089,7 +1091,7 @@ static void digi_set_termios(struct usb_
}
if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0)
dbg("digi_set_termios: write oob failed, ret=%d", ret);
-
+ tty_encode_baud_rate(tty, baud, baud);
}
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
git-libata-all.patch
pata_acpi-rework-the-acpi-drivers-based-upon-experience.patch
pata_acpi-use-ata_sff_port_start.patch
libata-correct-handling-of-srst-reset-sequences.patch
libata-add-a-drivers-ide-style-dma-disable.patch
ata-pata_marvell-use-ioread-for-iomap-ped-memory.patch
drivers-ata-pata_ixp4xx_cfc-ioremap-return-code-check.patch
libata-add-a-horkage-entry-for-drq-mishandling-atapi.patch
pata_pdc202xx_old-fix-timings.patch
pata_ns87415-initial-cut-at-87415-87560-ide-support.patch
fix-hpa-handling-regression.patch
libata_scsi-fix-transfer-lengths.patch
pata_atiixp-audit-notes-on-locking.patch
pata_hpt3x2n-clean-up-dpll-stuff.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
introduce-dma_mask_none-as-a-signal-for-unable-to-do.patch
pcmcia-use-dma_mask_none-for-the-default-for-all.patch
serial_txx9-cleanup-includes.patch
serial-keep-the-dtr-setting-for-serial-console.patch
8250_pci-autodetect-mainpine-cards.patch
8250_pci-autodetect-mainpine-cards-fix.patch
wake-up-from-a-serial-port.patch
fix-ide-legacy-mode-resources.patch
fix-ide-legacy-mode-resources-fix.patch
git-scsi-misc.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
security-convert-lsm-into-a-static-interface-vs-fix-null-pointer-dereference-in-__vm_enough_memory.patch
blackfin-enable-arbitary-speed-serial-setting.patch
tty-bring-the-old-cris-driver-back-somewhere-into-the.patch
mxser-remove-use-of-dead-tty_flipbuf_size-definition.patch
jsm-remove-further-unneeded-crud.patch
ttyh-remove-dead-define.patch
codingstyle-relax-the-80-cole-rule.patch
add-config_vt_unicode.patch
keys-missing-word-in-documentation.patch
ide-cd-is-unmaintained.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios-fix.patch
sysctl-remove-broken-cdrom-binary-sysctls.patch
mxser-remove-commented-crap.patch
char-cyclades-remove-bottom-half-processing.patch
usb_serial-stop-passing-null-to-functions-that-expect-data.patch
ark3116-update-termios-handling.patch
usb-serial-kill-another-case-we-pass-null-and-shouldnt.patch
ch341-fix-termios-handling.patch
digi_acceleport-fix-termios-and-also-readability-a-bit.patch
empeg-clean-up-and-handle-speeds.patch
funsoft-fix-termios.patch
ir_usb-termios-handling.patch
keyspan-termios-tidy.patch
kobil_sct-termios-encoding-fixups.patch
option-termios-handling.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
