The patch titled
libata: update the blacklist with a few more devices
has been removed from the -mm tree. Its filename was
libata-update-the-blacklist-with-a-few-more-devices.patch
This patch was dropped because Jeff deleted the code with it patches
------------------------------------------------------
Subject: libata: update the blacklist with a few more devices
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-core.c | 5 +++++
1 file changed, 5 insertions(+)
diff -puN drivers/ata/libata-core.c~libata-update-the-blacklist-with-a-few-more-devices drivers/ata/libata-core.c
--- a/drivers/ata/libata-core.c~libata-update-the-blacklist-with-a-few-more-devices
+++ a/drivers/ata/libata-core.c
@@ -3899,6 +3899,9 @@ static const struct ata_blacklist_entry
{ "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ },
+ { "Maxtor 7B250S0", "BANC1B70", ATA_HORKAGE_NONCQ, },
+ { "Maxtor 7B300S0", "BANC1B70", ATA_HORKAGE_NONCQ },
+ { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
{ "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
ATA_HORKAGE_NONCQ },
/* NCQ hard hangs device under heavier load, needs hard power cycle */
@@ -3915,6 +3918,7 @@ static const struct ata_blacklist_entry
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
{ "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
{ "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, },
+ { "ST3160812AS", "3.AD", ATA_HORKAGE_NONCQ, },
{ "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
/* devices which puke on READ_NATIVE_MAX */
@@ -3925,6 +3929,7 @@ static const struct ata_blacklist_entry
/* Devices which report 1 sector over size HPA */
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
+ { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
/* End Marker */
{ }
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
git-libata-all.patch
pata_acpi-rework-the-acpi-drivers-based-upon-experience.patch
pata_acpi-use-ata_sff_port_start.patch
libata-correct-handling-of-srst-reset-sequences.patch
libata-add-a-drivers-ide-style-dma-disable.patch
ata-pata_marvell-use-ioread-for-iomap-ped-memory.patch
drivers-ata-pata_ixp4xx_cfc-ioremap-return-code-check.patch
libata-update-the-blacklist-with-a-few-more-devices.patch
libata-add-a-horkage-entry-for-drq-mishandling-atapi.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
introduce-dma_mask_none-as-a-signal-for-unable-to-do.patch
pcmcia-use-dma_mask_none-for-the-default-for-all.patch
serial_txx9-cleanup-includes.patch
serial-keep-the-dtr-setting-for-serial-console.patch
8250_pci-autodetect-mainpine-cards.patch
8250_pci-autodetect-mainpine-cards-fix.patch
wake-up-from-a-serial-port.patch
fix-ide-legacy-mode-resources.patch
fix-ide-legacy-mode-resources-fix.patch
git-scsi-misc.patch
dtc-fix-typo.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
security-convert-lsm-into-a-static-interface-vs-fix-null-pointer-dereference-in-__vm_enough_memory.patch
blackfin-enable-arbitary-speed-serial-setting.patch
tty-bring-the-old-cris-driver-back-somewhere-into-the.patch
mxser-remove-use-of-dead-tty_flipbuf_size-definition.patch
jsm-remove-further-unneeded-crud.patch
ttyh-remove-dead-define.patch
codingstyle-relax-the-80-cole-rule.patch
add-config_vt_unicode.patch
keys-missing-word-in-documentation.patch
ide-cd-is-unmaintained.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios.patch
tty-expose-new-methods-needed-for-drivers-to-get-termios-fix.patch
sysctl-remove-broken-cdrom-binary-sysctls.patch
mxser-remove-commented-crap.patch
char-cyclades-remove-bottom-half-processing.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
