The patch titled
libata: strict checking for identify reporting
has been removed from the -mm tree. Its filename was
libata-strict-checking-for-identify-reporting.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: libata: strict checking for identify reporting
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
The ATA specifications require checks on certain flags before assuming the
validity of other data. Go through the methods and correct those needing
extra checks. Also note limits on ata_id_major_version with respect to ATA-1
and ATA-2. Correct the 32bit PIO check.
Wants to sit in -mm for a bit in case of a screwup on my part that I didn't
hit on the test drives and also in case someone, somewhere has a drive that
gets it wrong.
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
include/linux/ata.h | 96 +++++++++++++++++++++++++++++++++++++-----
1 files changed, 85 insertions(+), 11 deletions(-)
diff -puN include/linux/ata.h~libata-strict-checking-for-identify-reporting include/linux/ata.h
--- a/include/linux/ata.h~libata-strict-checking-for-identify-reporting
+++ a/include/linux/ata.h
@@ -334,22 +334,12 @@ struct ata_taskfile {
};
#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
-#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
-#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
-#define ata_id_hpa_enabled(id) ((id)[85] & (1 << 10))
-#define ata_id_has_fua(id) ((id)[84] & (1 << 6))
-#define ata_id_has_flush(id) ((id)[83] & (1 << 12))
-#define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13))
-#define ata_id_has_lba48(id) ((id)[83] & (1 << 10))
-#define ata_id_has_hpa(id) ((id)[82] & (1 << 10))
-#define ata_id_has_wcache(id) ((id)[82] & (1 << 5))
-#define ata_id_has_pm(id) ((id)[82] & (1 << 3))
#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
#define ata_id_removeable(id) ((id)[0] & (1 << 7))
-#define ata_id_has_dword_io(id) ((id)[50] & (1 << 0))
+#define ata_id_has_dword_io(id) ((id)[48] & (1 << 0))
#define ata_id_has_AN(id) \
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
((id)[78] & (1 << 5)) )
@@ -365,6 +355,90 @@ struct ata_taskfile {
#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
+static inline int ata_id_has_fua(const u16 *id)
+{
+ if ((id[84] & 0xC000) != 0x4000)
+ return 0;
+ return id[84] & (1 << 6);
+}
+
+static inline int ata_id_has_flush(const u16 *id)
+{
+ if ((id[83] & 0xC000) != 0x4000)
+ return 0;
+ return id[83] & (1 << 12);
+}
+
+static inline int ata_id_has_flush_ext(const u16 *id)
+{
+ if ((id[83] & 0xC000) != 0x4000)
+ return 0;
+ return id[83] & (1 << 13);
+}
+
+static inline int ata_id_has_lba48(const u16 *id)
+{
+ if ((id[83] & 0xC000) != 0x4000)
+ return 0;
+ return id[83] & (1 << 10);
+}
+
+static inline int ata_id_hpa_enabled(const u16 *id)
+{
+ /* Yes children, word 83 valid bits cover word 82 data */
+ if ((id[83] & 0xC000) != 0x4000)
+ return 0;
+ /* And 87 covers 85-87 */
+ if ((id[87] & 0xC000) != 0x4000)
+ return 0;
+ /* Check command sets enabled as well as supported */
+ if ((id[85] & ( 1 << 10)) == 0)
+ return 0;
+ return id[82] & (1 << 10);
+}
+
+static inline int ata_id_has_wcache(const u16 *id)
+{
+ /* Yes children, word 83 valid bits cover word 82 data */
+ if ((id[83] & 0xC000) != 0x4000)
+ return 0;
+ return id[82] & (1 << 5);
+}
+
+static inline int ata_id_has_pm(const u16 *id)
+{
+ if ((id[83] & 0xC000) != 0x4000)
+ return 0;
+ return id[82] & (1 << 3);
+}
+
+static inline int ata_id_rahead_enabled(const u16 *id)
+{
+ if ((id[87] & 0xC000) != 0x4000)
+ return 0;
+ return id[85] & (1 << 6);
+}
+
+static inline int ata_id_wcache_enabled(const u16 *id)
+{
+ if ((id[87] & 0xC000) != 0x4000)
+ return 0;
+ return id[85] & (1 << 5);
+}
+
+/**
+ * ata_id_major_version - get ATA level of drive
+ * @id: Identify data
+ *
+ * Caveats:
+ * ATA-1 considers identify optional
+ * ATA-2 introduces mandatory identify
+ * ATA-3 introduces word 80 and accurate reporting
+ *
+ * The practical impact of this is that ata_id_major_version cannot
+ * reliably report on drives below ATA3.
+ */
+
static inline unsigned int ata_id_major_version(const u16 *id)
{
unsigned int mver;
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
git-libata-all.patch
pata_acpi-rework-the-acpi-drivers-based-upon-experience.patch
libata-correct-handling-of-srst-reset-sequences.patch
libata-add-a-drivers-ide-style-dma-disable.patch
ata-pata_marvell-use-ioread-for-iomap-ped-memory.patch
st340823a-hpa-and-libata.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
tty-add-the-new-ioctls-and-definitionto-the-mips.patch
serial_txx9-cleanup-includes.patch
serial-keep-the-dtr-setting-for-serial-console.patch
8250_pci-autodetect-mainpine-cards.patch
fix-ide-legacy-mode-resources.patch
fix-ide-legacy-mode-resources-fix.patch
git-scsi-misc.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
git-xtensa.patch
security-convert-lsm-into-a-static-interface-vs-fix-null-pointer-dereference-in-__vm_enough_memory.patch
blackfin-enable-arbitary-speed-serial-setting.patch
mxser-remove-use-of-dead-tty_flipbuf_size-definition.patch
jsm-remove-further-unneeded-crud.patch
ttyh-remove-dead-define.patch
codingstyle-relax-the-80-cole-rule.patch
sysctl-remove-broken-cdrom-binary-sysctls.patch
mxser-remove-commented-crap.patch
char-cyclades-remove-bottom-half-processing.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
