The patch titled
au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()
has been added to the -mm tree. Its filename is
au1100fb-move-au1100fb_fb_blank-beforce.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()
From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
au1100fb_fb_blank() should come before au1100fb_setmode().
drivers/video/au1100fb.c: In function 'au1100fb_setmode':
drivers/video/au1100fb.c:211: error: implicit declaration of function 'au1100fb_fb_blank'
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
Cc: "Antonino A. Daplas" <adaplas@xxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/video/au1100fb.c | 92 ++++++++++++++++++-------------------
1 file changed, 46 insertions(+), 46 deletions(-)
diff -puN drivers/video/au1100fb.c~au1100fb-move-au1100fb_fb_blank-beforce drivers/video/au1100fb.c
--- a/drivers/video/au1100fb.c~au1100fb-move-au1100fb_fb_blank-beforce
+++ a/drivers/video/au1100fb.c
@@ -115,6 +115,52 @@ static int nocursor = 0;
module_param(nocursor, int, 0644);
MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+ switch (blank_mode) {
+
+ case VESA_NO_BLANKING:
+ /* Turn on panel */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+
+ case VESA_VSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
+ case VESA_POWERDOWN:
+ /* Turn off panel */
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+ PB1100_G_CONTROL);
+ }
+#endif
+ au_sync();
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+}
+
/*
* Set hardware with var settings. This will enable the controller with a specific
* mode, normally validated with the fb_check_var method
@@ -272,52 +318,6 @@ int au1100fb_fb_setcolreg(unsigned regno
return 0;
}
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
- print_dbg("fb_blank %d %p", blank_mode, fbi);
-
- switch (blank_mode) {
-
- case VESA_NO_BLANKING:
- /* Turn on panel */
- fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
-
- case VESA_VSYNC_SUSPEND:
- case VESA_HSYNC_SUSPEND:
- case VESA_POWERDOWN:
- /* Turn off panel */
- fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
- au_writew(au_readw(PB1100_G_CONTROL)
- & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
- PB1100_G_CONTROL);
- }
-#endif
- au_sync();
- break;
- default:
- break;
-
- }
- return 0;
-}
-
/* fb_pan_display
* Pan display in x and/or y as specified
*/
_
Patches currently in -mm which might be from yoichi_yuasa@xxxxxxxxxxxxxx are
au1100fb-move-au1100fb_fb_blank-beforce.patch
git-mips.patch
git-mtd.patch
move-a-few-definitions-to-au1000_xxs1500c.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
