The patch titled
pata_cmd64x: Set up MWDMA modes properly
has been removed from the -mm tree. Its filename was
pata_cmd64x-set-up-mwdma-modes-properly.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pata_cmd64x: Set up MWDMA modes properly
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Set the MWDMA timing by updating the correct registers. Split the PIO path as
this is mostly shared code. Wants testing.
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Tested-by: Mikael Pettersson <mikpe@xxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_cmd64x.c | 37 +++++++++++++++++++++++++-----------
1 files changed, 26 insertions(+), 11 deletions(-)
diff -puN drivers/ata/pata_cmd64x.c~pata_cmd64x-set-up-mwdma-modes-properly drivers/ata/pata_cmd64x.c
--- a/drivers/ata/pata_cmd64x.c~pata_cmd64x-set-up-mwdma-modes-properly
+++ a/drivers/ata/pata_cmd64x.c
@@ -31,7 +31,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.2.5"
/*
* CMD64x specific registers definition.
@@ -88,14 +88,15 @@ static int cmd648_cable_detect(struct at
}
/**
- * cmd64x_set_piomode - set initial PIO mode data
+ * cmd64x_set_piomode - set PIO and MWDMA timing
* @ap: ATA interface
* @adev: ATA device
+ * @mode: mode
*
- * Called to do the PIO mode setup.
+ * Called to do the PIO and MWDMA mode setup.
*/
-static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct ata_timing t;
@@ -117,8 +118,9 @@ static void cmd64x_set_piomode(struct at
int arttim = arttim_port[ap->port_no][adev->devno];
int drwtim = drwtim_port[ap->port_no][adev->devno];
-
- if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
+ /* ata_timing_compute is smart and will produce timings for MWDMA
+ that don't violate the drives PIO capabilities. */
+ if (ata_timing_compute(adev, mode, &t, T, 0) < 0) {
printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
return;
}
@@ -168,6 +170,20 @@ static void cmd64x_set_piomode(struct at
}
/**
+ * cmd64x_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Used when configuring the devices ot set the PIO timings. All the
+ * actual work is done by the PIO/MWDMA setting helper
+ */
+
+static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ cmd64x_set_timing(ap, adev, adev->pio_mode);
+}
+
+/**
* cmd64x_set_dmamode - set initial DMA mode data
* @ap: ATA interface
* @adev: ATA device
@@ -180,9 +196,6 @@ static void cmd64x_set_dmamode(struct at
static const u8 udma_data[] = {
0x30, 0x20, 0x10, 0x20, 0x10, 0x00
};
- static const u8 mwdma_data[] = {
- 0x30, 0x20, 0x10
- };
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 regU, regD;
@@ -208,8 +221,10 @@ static void cmd64x_set_dmamode(struct at
regU |= 1 << adev->devno; /* UDMA on */
if (adev->dma_mode > 2) /* 15nS timing */
regU |= 4 << adev->devno;
- } else
- regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift;
+ } else {
+ regU &= ~ (1 << adev->devno); /* UDMA off */
+ cmd64x_set_timing(ap, adev, adev->dma_mode);
+ }
regD |= 0x20 << adev->devno;
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
serial-add-support-for-ite-887x-chips.patch
serial_txx9-fix-modem-control-line-handling.patch
serial-8250-handle-saving-the-clear-on-read-bits-from-the-lsr.patch
add-blacklisting-capability-to-serial_pci-to-avoid-misdetection.patch
fix-null-pointer-dereference-in-__vm_enough_memory.patch
m68k-enable-arbitary-speed-tty-support.patch
introduce-config_check_signature-was-re-uninline.patch
git-libata-all.patch
pata_acpi-rework-the-acpi-drivers-based-upon-experience.patch
libata-acpi-checks-for-80wire-cable-implementation.patch
st340823a-hpa-and-libata.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
tty-add-the-new-ioctls-and-definitionto-the-mips.patch
serial_txx9-cleanup-includes.patch
git-scsi-misc.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
xtensa-enable-arbitary-tty-speed-setting-ioctls.patch
pci-align-bar-settings-for-legacy-mode-ide.patch
blackfin-enable-arbitary-speed-serial-setting.patch
mxser-remove-use-of-dead-tty_flipbuf_size-definition.patch
jsm-remove-further-unneeded-crud.patch
sysctl-remove-broken-cdrom-binary-sysctls.patch
char-cyclades-remove-bottom-half-processing.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
