The patch titled
kl5kusb105: witch to new speed API
has been removed from the -mm tree. Its filename was
kl5kusb105-switch-to-new-speed-api.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: kl5kusb105: witch to new speed API
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/usb/serial/kl5kusb105.c | 28 ++++++++++++++++++----------
1 files changed, 18 insertions(+), 10 deletions(-)
diff -puN drivers/usb/serial/kl5kusb105.c~kl5kusb105-switch-to-new-speed-api drivers/usb/serial/kl5kusb105.c
--- a/drivers/usb/serial/kl5kusb105.c~kl5kusb105-switch-to-new-speed-api
+++ a/drivers/usb/serial/kl5kusb105.c
@@ -728,24 +728,32 @@ static void klsi_105_set_termios (struct
#endif
}
- switch(cflag & CBAUD) {
- case B0: /* handled below */
+ switch(tty_get_baud_rate(port->tty)) {
+ case 0: /* handled below */
break;
- case B1200: priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+ case 1200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b1200;
break;
- case B2400: priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+ case 2400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b2400;
break;
- case B4800: priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+ case 4800:
+ priv->cfg.baudrate = kl5kusb105a_sio_b4800;
break;
- case B9600: priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ case 9600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
break;
- case B19200: priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+ case 19200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b19200;
break;
- case B38400: priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+ case 38400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b38400;
break;
- case B57600: priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+ case 57600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b57600;
break;
- case B115200: priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+ case 115200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b115200;
break;
default:
err("KLSI USB->Serial converter:"
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
serial-add-support-for-ite-887x-chips.patch
serial_txx9-fix-modem-control-line-handling.patch
serial-8250-handle-saving-the-clear-on-read-bits-from-the-lsr.patch
add-blacklisting-capability-to-serial_pci-to-avoid-misdetection.patch
fix-null-pointer-dereference-in-__vm_enough_memory.patch
m68k-enable-arbitary-speed-tty-support.patch
introduce-config_check_signature-was-re-uninline.patch
git-libata-all.patch
pata_acpi-rework-the-acpi-drivers-based-upon-experience.patch
libata-acpi-checks-for-80wire-cable-implementation.patch
st340823a-hpa-and-libata.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
tty-add-the-new-ioctls-and-definitionto-the-mips.patch
serial_txx9-cleanup-includes.patch
git-scsi-misc.patch
geode-mfgpt-support-for-geode-class-machines.patch
geode-mfgpt-clock-event-device-support.patch
xtensa-enable-arbitary-tty-speed-setting-ioctls.patch
pci-align-bar-settings-for-legacy-mode-ide.patch
blackfin-enable-arbitary-speed-serial-setting.patch
mxser-remove-use-of-dead-tty_flipbuf_size-definition.patch
jsm-remove-further-unneeded-crud.patch
sysctl-remove-broken-cdrom-binary-sysctls.patch
char-cyclades-remove-bottom-half-processing.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
