The patch titled
USB: sierra: Add TRU-Install (c) Support
has been added to the -mm tree. Its filename is
usb-sierra-add-tru-install-c-support.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: USB: sierra: Add TRU-Install (c) Support
From: Kevin Lloyd <linux@xxxxxxxxxxxxxxxxxx>
Add compatibility with Sierra Wireless' new TRU-Install feature. Future
devices that use this feature will not work unless this patch has been
applied.
Signed-off-by: Kevin Lloyd <linux@xxxxxxxxxxxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/usb/serial/sierra.c | 98 +++++++++++++++++++++------
drivers/usb/storage/unusual_devs.h | 11 +++
2 files changed, 89 insertions(+), 20 deletions(-)
diff -puN drivers/usb/serial/sierra.c~usb-sierra-add-tru-install-c-support drivers/usb/serial/sierra.c
--- a/drivers/usb/serial/sierra.c~usb-sierra-add-tru-install-c-support
+++ a/drivers/usb/serial/sierra.c
@@ -1,7 +1,7 @@
/*
USB Driver for Sierra Wireless
- Copyright (C) 2006 Kevin Lloyd <linux@xxxxxxxxxxxxxxxxxx>
+ Copyright (C) 2007 Kevin Lloyd <linux@xxxxxxxxxxxxxxxxxx>
IMPORTANT DISCLAIMER: This driver is not commercially supported by
Sierra Wireless. Use at your own risk.
@@ -12,10 +12,9 @@
Portions based on the option driver by Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
Whom based his on the Keyspan driver by Hugh Blemings <hugh@xxxxxxxxxxxx>
-
*/
-#define DRIVER_VERSION "v.1.0.6"
+#define DRIVER_VERSION "v.1.2.4b"
#define DRIVER_AUTHOR "Kevin Lloyd <linux@xxxxxxxxxxxxxxxxxx>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
@@ -28,6 +27,71 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#define SWIMS_USB_REQUEST_SetMode 0x0B
+#define SWIMS_USB_REQUEST_TYPE_SetMode 0x40
+#define SWIMS_USB_INDEX_SetMode 0x0000
+#define SWIMS_SET_MODE_Modem 0x0001
+
+/* per port private data */
+#define N_IN_URB 4
+#define N_OUT_URB 4
+#define IN_BUFLEN 4096
+
+static int debug;
+
+enum devicetype {
+ DEVICE_3_PORT = 0,
+ DEVICE_1_PORT = 1,
+ DEVICE_INSTALLER = 2,
+};
+
+int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
+{
+ int result;
+ dev_dbg(&udev->dev, "%s", "SET POWER STATE");
+ result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ 0x00, /* __u8 request */
+ 0x40, /* __u8 request type */
+ swiState, /* __u16 value */
+ 0, /* __u16 index */
+ NULL, /* void *data */
+ 0, /* __u16 size */
+ USB_CTRL_SET_TIMEOUT); /* int timeout */
+ return result;
+}
+
+int sierra_set_ms_mode(struct usb_device *udev, __u16 eSocMode)
+{
+ int result;
+ dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH");
+ result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ SWIMS_USB_REQUEST_SetMode, /* __u8 request */
+ SWIMS_USB_REQUEST_TYPE_SetMode, /* __u8 request type */
+ eSocMode, /* __u16 value */
+ SWIMS_USB_INDEX_SetMode, /* __u16 index */
+ NULL, /* void *data */
+ 0, /* __u16 size */
+ USB_CTRL_SET_TIMEOUT); /* int timeout */
+ return result;
+}
+
+int sierra_probe(struct usb_interface *iface, const struct usb_device_id *id)
+{
+ int result;
+ struct usb_device *udev;
+
+ udev = usb_get_dev(interface_to_usbdev(iface));
+
+ /* Check if in installer mode */
+ if (id->driver_info == DEVICE_INSTALLER){
+ dev_dbg(&udev->dev, "%s", "FOUND DEVICE(SW)\n");
+ result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
+ /*We do not want to bind to the device when in installer mode*/
+ return -EIO;
+ }
+
+ return usb_serial_probe(iface, id);
+}
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
@@ -43,8 +107,10 @@ static struct usb_device_id id_table []
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
- { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
- { USB_DEVICE(0x0F3D, 0x0112) }, /* AirPrime/Sierra PC 5220 */
+ { USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */
+ { USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */
+
+ { USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER},
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -56,6 +122,7 @@ static struct usb_device_id id_table_1po
};
static struct usb_device_id id_table_3port [] = {
+ /* CDMA Devices */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
@@ -63,6 +130,8 @@ static struct usb_device_id id_table_3po
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless AirCard 595U */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
+
+ /* GSM/UMTS Devices */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
@@ -73,20 +142,13 @@ static struct usb_device_id id_table_3po
static struct usb_driver sierra_driver = {
.name = "sierra",
- .probe = usb_serial_probe,
+ .probe = sierra_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
.no_dynamic_id = 1,
};
-static int debug;
-
-/* per port private data */
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-
struct sierra_port_private {
spinlock_t lock; /* lock the structure */
int outstanding_urbs; /* number of out urbs in flight */
@@ -421,7 +483,6 @@ static int sierra_open(struct usb_serial
int i;
struct urb *urb;
int result;
- __u16 set_mode_dzero = 0x0000;
portdata = usb_get_serial_port_data(port);
@@ -457,12 +518,6 @@ static int sierra_open(struct usb_serial
port->tty->low_latency = 1;
- /* set mode to D0 */
- result = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x00, 0x40, set_mode_dzero, 0, NULL,
- 0, USB_CTRL_SET_TIMEOUT);
-
sierra_send_setup(port);
/* start up the interrupt endpoint if we have one */
@@ -510,6 +565,9 @@ static int sierra_startup(struct usb_ser
dbg("%s", __FUNCTION__);
+ /*Set Device mode to D0 */
+ sierra_set_power_state(serial->dev, 0x0000);
+
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
diff -puN drivers/usb/storage/unusual_devs.h~usb-sierra-add-tru-install-c-support drivers/usb/storage/unusual_devs.h
--- a/drivers/usb/storage/unusual_devs.h~usb-sierra-add-tru-install-c-support
+++ a/drivers/usb/storage/unusual_devs.h
@@ -1384,6 +1384,17 @@ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
0 ),
+/* Reported by Kevin Lloyd <linux@xxxxxxxxxxxxxxxxxx>
+ * Entry is needed for the initializer function override,
+ * which instructs the device to load as a modem
+ * device.
+ */
+UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
+ "Sierra Wireless",
+ "USB MMC Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* Reported by Jaco Kroon <jaco@xxxxxxxxxxx>
* The usb-storage module found on the Digitech GNX4 (and supposedly other
* devices) misbehaves and causes a bunch of invalid I/O errors.
_
Patches currently in -mm which might be from linux@xxxxxxxxxxxxxxxxxx are
origin.patch
usb-sierra-add-tru-install-c-support.patch
usb-sierra-add-tru-install-c-support-fix.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
