The patch titled
atmel_spi: don't always deselect chip between messages
has been removed from the -mm tree. Its filename was
atmel_spi-dont-always-deselect-chip-between-messages.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: atmel_spi: don't always deselect chip between messages
From: David Brownell <david-b@xxxxxxxxxxx>
Update chipselect handling for atmel_spi:
* Teach it how to leave chipselect active between messages; this
helps various drivers work better.
* Cope with at91rm0200 errata: nCS0 can't be managed with GPIOs.
The MR.PCS value is now updated whenever a chipselect changes.
(This requires SPI pinmux init for that controller to change,
and also testing on rm9200; doesn't break at91sam9 or avr32.)
* Fix minor glitches: spi_setup() must leave chipselects inactive,
as must removal of the spi_device.
Also tweak diagnostic messaging to be a bit more useful.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Acked-by: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/spi/atmel_spi.c | 127 ++++++++++++++++++++++++++++++--------
1 file changed, 103 insertions(+), 24 deletions(-)
diff -puN drivers/spi/atmel_spi.c~atmel_spi-dont-always-deselect-chip-between-messages drivers/spi/atmel_spi.c
--- a/drivers/spi/atmel_spi.c~atmel_spi-dont-always-deselect-chip-between-messages
+++ a/drivers/spi/atmel_spi.c
@@ -46,6 +46,7 @@ struct atmel_spi {
struct clk *clk;
struct platform_device *pdev;
unsigned new_1:1;
+ struct spi_device *stay;
u8 stopping;
struct list_head queue;
@@ -62,29 +63,62 @@ struct atmel_spi {
/*
* Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
* they assume that spi slave device state will not change on deselect, so
- * that automagic deselection is OK. Not so! Workaround uses nCSx pins
- * as GPIOs; or newer controllers have CSAAT and friends.
+ * that automagic deselection is OK. ("NPCSx rises if no data is to be
+ * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
+ * controllers have CSAAT and friends.
*
- * Since the CSAAT functionality is a bit weird on newer controllers
- * as well, we use GPIO to control nCSx pins on all controllers.
+ * Since the CSAAT functionality is a bit weird on newer controllers as
+ * well, we use GPIO to control nCSx pins on all controllers, updating
+ * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
+ * support active-high chipselects despite the controller's belief that
+ * only active-low devices/systems exists.
+ *
+ * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
+ * right when driven with GPIO. ("Mode Fault does not allow more than one
+ * Master on Chip Select 0.") No workaround exists for that ... so for
+ * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
+ * and (c) will trigger that first erratum in some cases.
*/
-static inline void cs_activate(struct spi_device *spi)
+static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
{
unsigned gpio = (unsigned) spi->controller_data;
unsigned active = spi->mode & SPI_CS_HIGH;
+ u32 mr;
+
+ mr = spi_readl(as, MR);
+ mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
+
+ dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
+ gpio, active ? " (high)" : "",
+ mr);
- dev_dbg(&spi->dev, "activate %u%s\n", gpio, active ? " (high)" : "");
- gpio_set_value(gpio, active);
+ if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
+ gpio_set_value(gpio, active);
+ spi_writel(as, MR, mr);
}
-static inline void cs_deactivate(struct spi_device *spi)
+static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
{
unsigned gpio = (unsigned) spi->controller_data;
unsigned active = spi->mode & SPI_CS_HIGH;
+ u32 mr;
- dev_dbg(&spi->dev, "DEactivate %u%s\n", gpio, active ? " (low)" : "");
- gpio_set_value(gpio, !active);
+ /* only deactivate *this* device; sometimes transfers to
+ * another device may be active when this routine is called.
+ */
+ mr = spi_readl(as, MR);
+ if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
+ mr = SPI_BFINS(PCS, 0xf, mr);
+ spi_writel(as, MR, mr);
+ }
+
+ dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
+ gpio, active ? " (low)" : "",
+ mr);
+
+ if (!(cpu_is_at91rm9200() && spi->chip_select == 0))
+ gpio_set_value(gpio, !active);
}
/*
@@ -140,6 +174,7 @@ static void atmel_spi_next_xfer(struct s
/* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
* mechanism might help avoid the IRQ latency between transfers
+ * (and improve the nCS0 errata handling on at91rm9200 chips)
*
* We're also waiting for ENDRX before we start the next
* transfer because we need to handle some difficult timing
@@ -169,17 +204,25 @@ static void atmel_spi_next_message(struc
{
struct atmel_spi *as = spi_master_get_devdata(master);
struct spi_message *msg;
- u32 mr;
+ struct spi_device *spi;
BUG_ON(as->current_transfer);
msg = list_entry(as->queue.next, struct spi_message, queue);
+ spi = msg->spi;
- /* Select the chip */
- mr = spi_readl(as, MR);
- mr = SPI_BFINS(PCS, ~(1 << msg->spi->chip_select), mr);
- spi_writel(as, MR, mr);
- cs_activate(msg->spi);
+ dev_dbg(master->cdev.dev, "start message %p for %s\n",
+ msg, spi->dev.bus_id);
+
+ /* select chip if it's not still active */
+ if (as->stay) {
+ if (as->stay != spi) {
+ cs_deactivate(as, as->stay);
+ cs_activate(as, spi);
+ }
+ as->stay = NULL;
+ } else
+ cs_activate(as, spi);
atmel_spi_next_xfer(master, msg);
}
@@ -232,9 +275,13 @@ static void atmel_spi_dma_unmap_xfer(str
static void
atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
- struct spi_message *msg, int status)
+ struct spi_message *msg, int status, int stay)
{
- cs_deactivate(msg->spi);
+ if (!stay || status < 0)
+ cs_deactivate(as, msg->spi);
+ else
+ as->stay = msg->spi;
+
list_del(&msg->queue);
msg->status = status;
@@ -324,7 +371,7 @@ atmel_spi_interrupt(int irq, void *dev_i
/* Clear any overrun happening while cleaning up */
spi_readl(as, SR);
- atmel_spi_msg_done(master, as, msg, -EIO);
+ atmel_spi_msg_done(master, as, msg, -EIO, 0);
} else if (pending & SPI_BIT(ENDRX)) {
ret = IRQ_HANDLED;
@@ -342,12 +389,13 @@ atmel_spi_interrupt(int irq, void *dev_i
if (msg->transfers.prev == &xfer->transfer_list) {
/* report completed message */
- atmel_spi_msg_done(master, as, msg, 0);
+ atmel_spi_msg_done(master, as, msg, 0,
+ xfer->cs_change);
} else {
if (xfer->cs_change) {
- cs_deactivate(msg->spi);
+ cs_deactivate(as, msg->spi);
udelay(1);
- cs_activate(msg->spi);
+ cs_activate(as, msg->spi);
}
/*
@@ -410,6 +458,14 @@ static int atmel_spi_setup(struct spi_de
return -EINVAL;
}
+ /* see notes above re chipselect */
+ if (cpu_is_at91rm9200()
+ && spi->chip_select == 0
+ && (spi->mode & SPI_CS_HIGH)) {
+ dev_dbg(&spi->dev, "setup: can't be active-high\n");
+ return -EINVAL;
+ }
+
/* speed zero convention is used by some upper layers */
bus_hz = clk_get_rate(as->clk);
if (spi->max_speed_hz) {
@@ -446,6 +502,14 @@ static int atmel_spi_setup(struct spi_de
return ret;
spi->controller_state = (void *)npcs_pin;
gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
+ } else {
+ unsigned long flags;
+
+ spin_lock_irqsave(&as->lock, flags);
+ if (as->stay == spi)
+ as->stay = NULL;
+ cs_deactivate(as, spi);
+ spin_unlock_irqrestore(&as->lock, flags);
}
dev_dbg(&spi->dev,
@@ -502,6 +566,7 @@ static int atmel_spi_transfer(struct spi
}
}
+#ifdef VERBOSE
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
dev_dbg(controller,
" xfer %p: len %u tx %p/%08x rx %p/%08x\n",
@@ -509,6 +574,7 @@ static int atmel_spi_transfer(struct spi
xfer->tx_buf, xfer->tx_dma,
xfer->rx_buf, xfer->rx_dma);
}
+#endif
msg->status = -EINPROGRESS;
msg->actual_length = 0;
@@ -524,8 +590,21 @@ static int atmel_spi_transfer(struct spi
static void atmel_spi_cleanup(struct spi_device *spi)
{
- if (spi->controller_state)
- gpio_free((unsigned int)spi->controller_data);
+ struct atmel_spi *as = spi_master_get_devdata(spi->master);
+ unsigned gpio = (unsigned) spi->controller_data;
+ unsigned long flags;
+
+ if (!spi->controller_state)
+ return;
+
+ spin_lock_irqsave(&as->lock, flags);
+ if (as->stay == spi) {
+ as->stay = NULL;
+ cs_deactivate(as, spi);
+ }
+ spin_unlock_irqrestore(&as->lock, flags);
+
+ gpio_free(gpio);
}
/*-------------------------------------------------------------------------*/
_
Patches currently in -mm which might be from david-b@xxxxxxxxxxx are
origin.patch
git-leds.patch
git-mmc.patch
git-mtd.patch
git-backlight.patch
use-mutex-instead-of-semaphore-in-the-usb-gadget-serial-driver.patch
geode-basic-infrastructure-support-for-amd-geode-class.patch
drivers-pmc-msp71xx-gpio-char-driver.patch
gpio-calls-dont-need-i-o-barriers.patch
dev_vdbg-available-with-dverbose_debug.patch
dev_vdbg-available-with-dverbose_debug-docs.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
