The patch titled
scsi: don't build scsi_dma_{map,unmap} for !HAS_DMA
has been removed from the -mm tree. Its filename was
scsi-dont-build-scsi_dma_mapunmap-for-has_dma.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: scsi: don't build scsi_dma_{map,unmap} for !HAS_DMA
From: Cornelia Huck <cornelia.huck@xxxxxxxxxx>
With
dma-mapping-prevent-dma-dependent-code-from-linking-on.patch
scsi fails to build on !HAS_DMA architectures:
drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map':
: undefined reference to `dma_map_sg'
drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap':
: undefined reference to `dma_unmap_sg'
I split those functions out into a new file. Builds on s390 and i386.
Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if
HAS_DMA is set.
Signed-off-by: Cornelia Huck <cornelia.huck@xxxxxxxxxx>
Cc: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
Cc: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/Kconfig | 5 +++
drivers/scsi/Makefile | 6 ++--
drivers/scsi/scsi_lib.c | 38 -------------------------
drivers/scsi/scsi_lib_dma.c | 50 ++++++++++++++++++++++++++++++++++
4 files changed, 58 insertions(+), 41 deletions(-)
diff -puN drivers/scsi/Kconfig~scsi-dont-build-scsi_dma_mapunmap-for-has_dma drivers/scsi/Kconfig
--- a/drivers/scsi/Kconfig~scsi-dont-build-scsi_dma_mapunmap-for-has_dma
+++ a/drivers/scsi/Kconfig
@@ -10,6 +10,7 @@ config RAID_ATTRS
config SCSI
tristate "SCSI device support"
depends on BLOCK
+ select SCSI_DMA if HAS_DMA
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
@@ -29,6 +30,10 @@ config SCSI
However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a SCSI device.
+config SCSI_DMA
+ bool
+ default n
+
config SCSI_TGT
tristate "SCSI target support"
depends on SCSI && EXPERIMENTAL
diff -puN drivers/scsi/Makefile~scsi-dont-build-scsi_dma_mapunmap-for-has_dma drivers/scsi/Makefile
--- a/drivers/scsi/Makefile~scsi-dont-build-scsi_dma_mapunmap-for-has_dma
+++ a/drivers/scsi/Makefile
@@ -149,9 +149,9 @@ obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
obj-$(CONFIG_SCSI_WAIT_SCAN) += scsi_wait_scan.o
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
- scsicam.o scsi_error.o scsi_lib.o \
- scsi_scan.o scsi_sysfs.o \
- scsi_devinfo.o
+ scsicam.o scsi_error.o scsi_lib.o
+scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o
+scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o
scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
diff -puN drivers/scsi/scsi_lib.c~scsi-dont-build-scsi_dma_mapunmap-for-has_dma drivers/scsi/scsi_lib.c
--- a/drivers/scsi/scsi_lib.c~scsi-dont-build-scsi_dma_mapunmap-for-has_dma
+++ a/drivers/scsi/scsi_lib.c
@@ -2290,41 +2290,3 @@ void scsi_kunmap_atomic_sg(void *virt)
kunmap_atomic(virt, KM_BIO_SRC_IRQ);
}
EXPORT_SYMBOL(scsi_kunmap_atomic_sg);
-
-/**
- * scsi_dma_map - perform DMA mapping against command's sg lists
- * @cmd: scsi command
- *
- * Returns the number of sg lists actually used, zero if the sg lists
- * is NULL, or -ENOMEM if the mapping failed.
- */
-int scsi_dma_map(struct scsi_cmnd *cmd)
-{
- int nseg = 0;
-
- if (scsi_sg_count(cmd)) {
- struct device *dev = cmd->device->host->shost_gendev.parent;
-
- nseg = dma_map_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
- cmd->sc_data_direction);
- if (unlikely(!nseg))
- return -ENOMEM;
- }
- return nseg;
-}
-EXPORT_SYMBOL(scsi_dma_map);
-
-/**
- * scsi_dma_unmap - unmap command's sg lists mapped by scsi_dma_map
- * @cmd: scsi command
- */
-void scsi_dma_unmap(struct scsi_cmnd *cmd)
-{
- if (scsi_sg_count(cmd)) {
- struct device *dev = cmd->device->host->shost_gendev.parent;
-
- dma_unmap_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
- cmd->sc_data_direction);
- }
-}
-EXPORT_SYMBOL(scsi_dma_unmap);
diff -puN /dev/null drivers/scsi/scsi_lib_dma.c
--- /dev/null
+++ a/drivers/scsi/scsi_lib_dma.c
@@ -0,0 +1,50 @@
+/*
+ * SCSI library functions depending on DMA
+ */
+
+#include <linux/blkdev.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+/**
+ * scsi_dma_map - perform DMA mapping against command's sg lists
+ * @cmd: scsi command
+ *
+ * Returns the number of sg lists actually used, zero if the sg lists
+ * is NULL, or -ENOMEM if the mapping failed.
+ */
+int scsi_dma_map(struct scsi_cmnd *cmd)
+{
+ int nseg = 0;
+
+ if (scsi_sg_count(cmd)) {
+ struct device *dev = cmd->device->host->shost_gendev.parent;
+
+ nseg = dma_map_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
+ cmd->sc_data_direction);
+ if (unlikely(!nseg))
+ return -ENOMEM;
+ }
+ return nseg;
+}
+EXPORT_SYMBOL(scsi_dma_map);
+
+/**
+ * scsi_dma_unmap - unmap command's sg lists mapped by scsi_dma_map
+ * @cmd: scsi command
+ */
+void scsi_dma_unmap(struct scsi_cmnd *cmd)
+{
+ if (scsi_sg_count(cmd)) {
+ struct device *dev = cmd->device->host->shost_gendev.parent;
+
+ dma_unmap_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
+ cmd->sc_data_direction);
+ }
+}
+EXPORT_SYMBOL(scsi_dma_unmap);
_
Patches currently in -mm which might be from cornelia.huck@xxxxxxxxxx are
origin.patch
driver-core-check-return-code-of-sysfs_create_link.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
