- libata-core-convert-to-use-cancel_rearming_delayed_work.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     libata-core: convert to use cancel_rearming_delayed_work()
has been removed from the -mm tree.  Its filename was
     libata-core-convert-to-use-cancel_rearming_delayed_work.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
Subject: libata-core: convert to use cancel_rearming_delayed_work()
From: Oleg Nesterov <oleg@xxxxxxxxxx>

We should not use cancel_work_sync(delayed_work->work). This works, but not
good. We can use cancel_rearming_delayed_work(), this also simplifies the
code.

Signed-off-by: Oleg Nesterov <oleg@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/ata/libata-core.c |   44 +++---------------------------------
 include/linux/libata.h    |    1 
 2 files changed, 4 insertions(+), 41 deletions(-)

diff -puN drivers/ata/libata-core.c~libata-core-convert-to-use-cancel_rearming_delayed_work drivers/ata/libata-core.c
--- a/drivers/ata/libata-core.c~libata-core-convert-to-use-cancel_rearming_delayed_work
+++ a/drivers/ata/libata-core.c
@@ -1283,18 +1283,11 @@ static unsigned int ata_id_xfermask(cons
 void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
 			 unsigned long delay)
 {
-	int rc;
-
-	if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK)
-		return;
-
 	PREPARE_DELAYED_WORK(&ap->port_task, fn);
 	ap->port_task_data = data;
 
-	rc = queue_delayed_work(ata_wq, &ap->port_task, delay);
-
-	/* rc == 0 means that another user is using port task */
-	WARN_ON(rc == 0);
+	/* may fail if ata_port_flush_task() in progress */
+	queue_delayed_work(ata_wq, &ap->port_task, delay);
 }
 
 /**
@@ -1309,32 +1302,9 @@ void ata_port_queue_task(struct ata_port
  */
 void ata_port_flush_task(struct ata_port *ap)
 {
-	unsigned long flags;
-
 	DPRINTK("ENTER\n");
 
-	spin_lock_irqsave(ap->lock, flags);
-	ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK;
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	DPRINTK("flush #1\n");
-	cancel_work_sync(&ap->port_task.work); /* akpm: seems unneeded */
-
-	/*
-	 * At this point, if a task is running, it's guaranteed to see
-	 * the FLUSH flag; thus, it will never queue pio tasks again.
-	 * Cancel and flush.
-	 */
-	if (!cancel_delayed_work(&ap->port_task)) {
-		if (ata_msg_ctl(ap))
-			ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n",
-					__FUNCTION__);
-		cancel_work_sync(&ap->port_task.work);
-	}
-
-	spin_lock_irqsave(ap->lock, flags);
-	ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK;
-	spin_unlock_irqrestore(ap->lock, flags);
+	cancel_rearming_delayed_work(&ap->port_task);
 
 	if (ata_msg_ctl(ap))
 		ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__);
@@ -6557,13 +6527,7 @@ void ata_port_detach(struct ata_port *ap
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	ata_port_wait_eh(ap);
-
-	/* Flush hotplug task.  The sequence is similar to
-	 * ata_port_flush_task().
-	 */
-	cancel_work_sync(&ap->hotplug_task.work); /* akpm: why? */
-	cancel_delayed_work(&ap->hotplug_task);
-	cancel_work_sync(&ap->hotplug_task.work);
+	cancel_rearming_delayed_work(&ap->hotplug_task);
 
  skip_eh:
 	/* remove the associated SCSI host */
diff -puN include/linux/libata.h~libata-core-convert-to-use-cancel_rearming_delayed_work include/linux/libata.h
--- a/include/linux/libata.h~libata-core-convert-to-use-cancel_rearming_delayed_work
+++ a/include/linux/libata.h
@@ -196,7 +196,6 @@ enum {
 	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
 	ATA_PFLAG_INITIALIZING	= (1 << 7), /* being initialized, don't touch */
 
-	ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
 	ATA_PFLAG_GTM_VALID	= (1 << 19), /* acpi_gtm data valid */
_

Patches currently in -mm which might be from oleg@xxxxxxxxxx are

origin.patch
freezer-make-kernel-threads-nonfreezable-by-default.patch
freezer-run-show_state-when-freezing-times-out.patch
hibernation-prepare-to-enter-the-low-power-state.patch
freezer-avoid-freezing-kernel-threads-prematurely.patch
freezer-use-__set_current_state-in-refrigerator.patch
freezer-return-int-from-freeze_processes.patch
freezer-remove-redundant-check-in-try_to_freeze_tasks.patch
pm-prevent-frozen-user-mode-helpers-from-failing-the-freezing-of-tasks-rev-2.patch
add-generic-exit-time-stack-depth-checking-to-config_debug_stack_usage.patch
clone-flag-clone_parent_tidptr-leaves-invalid-results-in-memory.patch
use-write_trylock_irqsave-in-ptrace_attach.patch
fix-stop_machine_run-problem-with-naughty-real-time-process.patch
cpu-hotplug-fix-ksoftirqd-termination-on-cpu-hotplug-with-naughty-realtime-process.patch
percpu_counters-use-cpu-notifiers.patch
percpu_counters-use-for_each_online_cpu.patch
mm-fix-create_new_namespaces-return-value.patch
adb_probe_task-remove-unneeded-flush_signals-call.patch
kcdrwd-remove-unneeded-flush_signals-call.patch
nbdcsock_xmit-cleanup-signal-related-code.patch
rename-cancel_rearming_delayed_work-to-cancel_delayed_work_sync.patch
make-cancel_xxx_work_sync-return-a-boolean.patch
destroy_workqueue-can-livelock.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux