The patch titled
libata: support chips with 64K PRD quirk
has been added to the -mm tree. Its filename is
libata-support-chips-with-64k-prd-quirk.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: libata: support chips with 64K PRD quirk
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Add ata_dumb_qc_prep and supporting logic so that a driver can just
specify it needs to be helped in this area. 64K entries are split
as with drivers/ide.
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Cc: Tejun Heo <htejun@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-core.c | 79 ++++++++++++++++++++++++++++++++++++
drivers/ata/pata_cs5520.c | 4 -
drivers/ata/pata_cs5530.c | 4 -
drivers/ata/pata_sc1200.c | 4 -
include/linux/libata.h | 2
5 files changed, 87 insertions(+), 6 deletions(-)
diff -puN drivers/ata/libata-core.c~libata-support-chips-with-64k-prd-quirk drivers/ata/libata-core.c
--- a/drivers/ata/libata-core.c~libata-support-chips-with-64k-prd-quirk
+++ a/drivers/ata/libata-core.c
@@ -4113,6 +4113,68 @@ static void ata_fill_sg(struct ata_queue
}
/**
+ * ata_fill_sg_dumb - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command. Perform the fill
+ * so that we avoid writing any length 64K records for
+ * controllers that don't follow the spec.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scatterlist *sg;
+ unsigned int idx;
+
+ WARN_ON(qc->__sg == NULL);
+ WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
+
+ idx = 0;
+ ata_for_each_sg(sg, qc) {
+ u32 addr, offset;
+ u32 sg_len, len, blen;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ blen = len & 0xffff;
+ ap->prd[idx].addr = cpu_to_le32(addr);
+ if (blen == 0) {
+ /* Some PATA chipsets like the CS5530 can't
+ cope with 0x0000 meaning 64K as the spec says */
+ ap->prd[idx].flags_len = cpu_to_le32(0x8000);
+ blen = 0x8000;
+ ap->prd[++idx].addr = cpu_to_le32(addr + 0x8000);
+ }
+ ap->prd[idx].flags_len = cpu_to_le32(blen);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+
+ idx++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ if (idx)
+ ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
* ata_check_atapi_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
@@ -4159,6 +4221,23 @@ void ata_qc_prep(struct ata_queued_cmd *
ata_fill_sg(qc);
}
+/**
+ * ata_dumb_qc_prep - Prepare taskfile for submission
+ * @qc: Metadata associated with taskfile to be prepared
+ *
+ * Prepare ATA taskfile for submission.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ata_fill_sg_dumb(qc);
+}
+
void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
/**
diff -puN drivers/ata/pata_cs5520.c~libata-support-chips-with-64k-prd-quirk drivers/ata/pata_cs5520.c
--- a/drivers/ata/pata_cs5520.c~libata-support-chips-with-64k-prd-quirk
+++ a/drivers/ata/pata_cs5520.c
@@ -146,7 +146,7 @@ static struct scsi_host_template cs5520_
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
+ .sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -178,7 +178,7 @@ static struct ata_port_operations cs5520
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
+ .qc_prep = ata_dumb_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
diff -puN drivers/ata/pata_cs5530.c~libata-support-chips-with-64k-prd-quirk drivers/ata/pata_cs5530.c
--- a/drivers/ata/pata_cs5530.c~libata-support-chips-with-64k-prd-quirk
+++ a/drivers/ata/pata_cs5530.c
@@ -167,7 +167,7 @@ static struct scsi_host_template cs5530_
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
+ .sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -201,7 +201,7 @@ static struct ata_port_operations cs5530
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
- .qc_prep = ata_qc_prep,
+ .qc_prep = ata_dumb_qc_prep,
.qc_issue = cs5530_qc_issue_prot,
.data_xfer = ata_data_xfer,
diff -puN drivers/ata/pata_sc1200.c~libata-support-chips-with-64k-prd-quirk drivers/ata/pata_sc1200.c
--- a/drivers/ata/pata_sc1200.c~libata-support-chips-with-64k-prd-quirk
+++ a/drivers/ata/pata_sc1200.c
@@ -185,7 +185,7 @@ static struct scsi_host_template sc1200_
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
+ .sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -219,7 +219,7 @@ static struct ata_port_operations sc1200
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
+ .qc_prep = ata_dumb_qc_prep,
.qc_issue = sc1200_qc_issue_prot,
.data_xfer = ata_data_xfer,
diff -puN include/linux/libata.h~libata-support-chips-with-64k-prd-quirk include/linux/libata.h
--- a/include/linux/libata.h~libata-support-chips-with-64k-prd-quirk
+++ a/include/linux/libata.h
@@ -116,6 +116,7 @@ static inline struct device *pci_dev_to_
enum {
/* various global constants */
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
+ LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */
ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
@@ -785,6 +786,7 @@ extern void ata_data_xfer(struct ata_dev
unsigned int buflen, int write_data);
extern void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data);
+extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
lots-of-architectures-enable-arbitary-speed-tty-support.patch
powerpc-enable-arbitary-speed-tty-ioctls-and-split.patch
nozomi-remove-termios-checks-from-various-old-char-serial-drivers.patch
ia64-arbitary-speed-tty-ioctl-support.patch
git-libata-all.patch
libata-add-ich8m-pciids-to-ata_piix.patch
libata-add-irq_flags-to-struct-pata_platform_info.patch
libata-add-irq_flags-to-struct-pata_platform_info-fix.patch
pata_pdc202xx_old-correct-cable-detect-logic.patch
libata-support-chips-with-64k-prd-quirk.patch
libata-support-chips-with-64k-prd-quirk-export.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
testing-patch-for-ali-pata-fixes-hopefully-for-the-problems-with-atapi-dma.patch
pata_ali-more-work.patch
tty-add-the-new-ioctls-and-definitionto-the-mips.patch
rfcomm-hangup-ttys-before-releasing-rfcomm_dev.patch
fix-gregkh-pci-pci-syscallc-switch-to-refcounting-api.patch
add-pci_try_set_mwi.patch
git-scsi-misc.patch
ppa-coding-police-and-printk-levels.patch
mos7840c-turn-this-into-a-serial-driver.patch
pl2303-remove-bogus-checks-and-fix-speed-support-to-use.patch
visor-and-whiteheat-remove-bogus-termios-change-checks.patch
mos7720-remove-bogus-no-termios-change-check.patch
io_-remove-bogus-termios-no-change-checks.patch
x86-64-disable-the-gart-in-shutdown.patch
x86_84-move-iommu-declaration-from-proto-to-iommuh.patch
x86_84-move-iommu-declaration-from-proto-to-iommuh-fix.patch
xtensa-enable-arbitary-tty-speed-setting-ioctls.patch
blackfin-enable-arbitary-speed-serial-setting.patch
h8300-enable-arbitary-speed-tty-port-setup.patch
arm26-enable-arbitary-speed-tty-ioctls-and-split.patch
m32r-enable-arbitary-speed-tty-rate-setting.patch
etrax-enable-arbitary-speed-setting-on-tty-ports.patch
v850-enable-arbitary-speed-tty-ioctls.patch
doc-kernel-parameters-use-x86-32-tag-instead-of-ia-32.patch
make-proc-tty-drivers-use-seq_list_xxx-helpers.patch
update-zilog-timeout.patch
edd-switch-to-pci_get-based-api.patch
mpu401-warning-fixes.patch
char-tty_ioctl-use-wait_event_interruptible_timeout.patch
char-tty_ioctl-little-whitespace-cleanup.patch
intel-rng-undo-mess-made-by-an-80-column-extremist.patch
improve-behaviour-of-spurious-irq-detect.patch
audit-add-tty-input-auditing.patch
audit-add-tty-input-auditing-fix.patch
audit-add-tty-input-auditing-fix-2.patch
revert-vanishing-ioctl-handler-debugging.patch
amiserial-remove-incorrect-no-termios-change-check.patch
genericserial-remove-bogus-optimisation-check-and-dead-code-paths.patch
synclink-remove-bogus-no-change-termios-optimisation.patch
68360serial-remove-broken-optimisation.patch
serial-remove-termios-checks-from-various-old-char-serial.patch
i2o_cfg_passthru-cleanup.patch
i2o_cfg_passthru-cleanup-fix.patch
wrong-memory-access-in-i2o_block_device_lock.patch
i2o-message-leak-in-i2o_msg_post_wait_mem.patch
i2o-proc-reading-oops.patch
i2o-debug-output-cleanup.patch
stallion-remove-unneeded-lock_kernel.patch
coredump-masking-bound-suid_dumpable-sysctl.patch
coredump-masking-reimplementation-of-dumpable-using-two-flags.patch
coredump-masking-reimplementation-of-dumpable-using-two-flags-fix.patch
coredump-masking-add-an-interface-for-core-dump-filter.patch
coredump-masking-elf-enable-core-dump-filtering.patch
coredump-masking-elf-fdpic-remove-an-unused-argument.patch
coredump-masking-elf-fdpic-enable-core-dump-filtering.patch
coredump-masking-documentation-for-proc-pid-coredump_filter.patch
driver-edac-add-mips-and-ppc-visibility.patch
driver-edac-mod-race-fix-i82875p.patch
driver-edac-fix-ignored-return-i82875p.patch
include-linux-pci_id-h-add-amd-northbridge-defines.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
