+ sata_promise-use-tf-interface-for-polling-nodata-commands.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     sata_promise: use TF interface for polling NODATA commands
has been added to the -mm tree.  Its filename is
     sata_promise-use-tf-interface-for-polling-nodata-commands.patch

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: sata_promise: use TF interface for polling NODATA commands
From: Tejun Heo <htejun@xxxxxxxxx>

sata_promise uses two different command modes - packet and TF.  Packet mode
is intelligent low-overhead mode while TF is the same old taskfile
interface.  As with other advanced interface (ahci/sil24),
ATA_TFLAG_POLLING has no effect in packet mode.  However, PIO commands are
issued using TF interface in polling mode, so pdc_interrupt() considers
interrupts spurious if ATA_TFLAG_POLLING is set.

This is broken for polling NODATA commands because command is issued using
packet mode but the interrupt handler ignores it due to ATA_TFLAG_POLLING. 
Fix pdc_qc_issue_prot() such that ATA/ATAPI NODATA commands are issued
using TF interface if ATA_TFLAG_POLLING is set.

This patch fixes detection failure introduced by polling SETXFERMODE.

Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
Acked-by: Mikael Pettersson <mikpe@xxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/ata/sata_promise.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff -puN drivers/ata/sata_promise.c~sata_promise-use-tf-interface-for-polling-nodata-commands drivers/ata/sata_promise.c
--- a/drivers/ata/sata_promise.c~sata_promise-use-tf-interface-for-polling-nodata-commands
+++ a/drivers/ata/sata_promise.c
@@ -784,9 +784,12 @@ static unsigned int pdc_qc_issue_prot(st
 		if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
 			break;
 		/*FALLTHROUGH*/
+	case ATA_PROT_NODATA:
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			break;
+		/*FALLTHROUGH*/
 	case ATA_PROT_ATAPI_DMA:
 	case ATA_PROT_DMA:
-	case ATA_PROT_NODATA:
 		pdc_packet_start(qc);
 		return 0;
 
@@ -800,7 +803,7 @@ static unsigned int pdc_qc_issue_prot(st
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON (tf->protocol == ATA_PROT_DMA ||
-		 tf->protocol == ATA_PROT_NODATA);
+		 tf->protocol == ATA_PROT_ATAPI_DMA);
 	ata_tf_load(ap, tf);
 }
 
@@ -808,7 +811,7 @@ static void pdc_tf_load_mmio(struct ata_
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON (tf->protocol == ATA_PROT_DMA ||
-		 tf->protocol == ATA_PROT_NODATA);
+		 tf->protocol == ATA_PROT_ATAPI_DMA);
 	ata_exec_command(ap, tf);
 }
 
_

Patches currently in -mm which might be from htejun@xxxxxxxxx are

git-libata-all.patch
pata_acpi-restore-driver.patch
libata-implement-ata_wait_after_reset.patch
sata_promise-use-tf-interface-for-polling-nodata-commands.patch
drivers-ata-add-sw-ncq-support-to-sata_nv-for-mcp51-mcp55-mcp61.patch
git-scsi-misc.patch
update-documentation-block-barriertxt.patch
dma-mapping-prevent-dma-dependent-code-from-linking-on.patch
lib-add-idr_for_each.patch
lib-add-idr_for_each-fix.patch
lib-add-idr_remove_all.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux