The patch titled
drivers-edac: Lindent r82600
has been added to the -mm tree. Its filename is
drivers-edac-lindent-r82600.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: drivers-edac: Lindent r82600
From: Douglas Thompson <dougthompson@xxxxxxxxxxxx>
Run r82600_edac.c file through Lindent for cleanup
Signed-off-by: Douglas Thompson <dougthompson@xxxxxxxxxxxx>
Signed-off-by: Dave Jiang <djiang@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/edac/r82600_edac.c | 55 +++++++++++++++++------------------
1 file changed, 27 insertions(+), 28 deletions(-)
diff -puN drivers/edac/r82600_edac.c~drivers-edac-lindent-r82600 drivers/edac/r82600_edac.c
--- a/drivers/edac/r82600_edac.c~drivers-edac-lindent-r82600
+++ a/drivers/edac/r82600_edac.c
@@ -133,8 +133,8 @@ struct r82600_error_info {
static unsigned int disable_hardware_scrub = 0;
-static void r82600_get_error_info (struct mem_ctl_info *mci,
- struct r82600_error_info *info)
+static void r82600_get_error_info(struct mem_ctl_info *mci,
+ struct r82600_error_info *info)
{
struct pci_dev *pdev;
@@ -144,18 +144,19 @@ static void r82600_get_error_info (struc
if (info->eapr & BIT(0))
/* Clear error to allow next error to be reported [p.62] */
pci_write_bits32(pdev, R82600_EAP,
- ((u32) BIT(0) & (u32) BIT(1)),
- ((u32) BIT(0) & (u32) BIT(1)));
+ ((u32) BIT(0) & (u32) BIT(1)),
+ ((u32) BIT(0) & (u32) BIT(1)));
if (info->eapr & BIT(1))
/* Clear error to allow next error to be reported [p.62] */
pci_write_bits32(pdev, R82600_EAP,
- ((u32) BIT(0) & (u32) BIT(1)),
- ((u32) BIT(0) & (u32) BIT(1)));
+ ((u32) BIT(0) & (u32) BIT(1)),
+ ((u32) BIT(0) & (u32) BIT(1)));
}
-static int r82600_process_error_info (struct mem_ctl_info *mci,
- struct r82600_error_info *info, int handle_errors)
+static int r82600_process_error_info(struct mem_ctl_info *mci,
+ struct r82600_error_info *info,
+ int handle_errors)
{
int error_found;
u32 eapaddr, page;
@@ -172,25 +173,23 @@ static int r82600_process_error_info (st
* granularity (upper 19 bits only) */
page = eapaddr >> PAGE_SHIFT;
- if (info->eapr & BIT(0)) { /* CE? */
+ if (info->eapr & BIT(0)) { /* CE? */
error_found = 1;
if (handle_errors)
- edac_mc_handle_ce(mci, page, 0, /* not avail */
- syndrome,
- edac_mc_find_csrow_by_page(mci, page),
- 0, /* channel */
- mci->ctl_name);
+ edac_mc_handle_ce(mci, page, 0, /* not avail */
+ syndrome, edac_mc_find_csrow_by_page(mci, page), 0, /* channel */
+ mci->ctl_name);
}
- if (info->eapr & BIT(1)) { /* UE? */
+ if (info->eapr & BIT(1)) { /* UE? */
error_found = 1;
if (handle_errors)
/* 82600 doesn't give enough info */
edac_mc_handle_ue(mci, page, 0,
- edac_mc_find_csrow_by_page(mci, page),
- mci->ctl_name);
+ edac_mc_find_csrow_by_page(mci, page),
+ mci->ctl_name);
}
return error_found;
@@ -211,11 +210,11 @@ static inline int ecc_enabled(u8 dramcr)
}
static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
- u8 dramcr)
+ u8 dramcr)
{
struct csrow_info *csrow;
int index;
- u8 drbar; /* SDRAM Row Boundry Address Register */
+ u8 drbar; /* SDRAM Row Boundry Address Register */
u32 row_high_limit, row_high_limit_last;
u32 reg_sdram, ecc_on, row_base;
@@ -309,12 +308,12 @@ static int r82600_probe1(struct pci_dev
mci->edac_check = r82600_check;
mci->ctl_page_to_phys = NULL;
r82600_init_csrows(mci, pdev, dramcr);
- r82600_get_error_info(mci, &discard); /* clear counters */
+ r82600_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
* type of memory controller. The ID is therefore hardcoded to 0.
*/
- if (edac_mc_add_mc(mci,0)) {
+ if (edac_mc_add_mc(mci, 0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
@@ -330,14 +329,14 @@ static int r82600_probe1(struct pci_dev
debugf3("%s(): success\n", __func__);
return 0;
-fail:
+ fail:
edac_mc_free(mci);
return -ENODEV;
}
/* returns count (>= 0), or negative on error */
static int __devinit r82600_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+ const struct pci_device_id *ent)
{
debugf0("%s()\n", __func__);
@@ -359,11 +358,11 @@ static void __devexit r82600_remove_one(
static const struct pci_device_id r82600_pci_tbl[] __devinitdata = {
{
- PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)
- },
+ PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)
+ },
{
- 0,
- } /* 0 terminated list. */
+ 0,
+ } /* 0 terminated list. */
};
MODULE_DEVICE_TABLE(pci, r82600_pci_tbl);
@@ -390,7 +389,7 @@ module_exit(r82600_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tim Small <tim@xxxxxxxxxxxxxxxx> - WPAD Ltd. "
- "on behalf of EADS Astrium");
+ "on behalf of EADS Astrium");
MODULE_DESCRIPTION("MC support for Radisys 82600 memory controllers");
module_param(disable_hardware_scrub, bool, 0644);
_
Patches currently in -mm which might be from dougthompson@xxxxxxxxxxxx are
drivers-edac-remove-depends-on-x86.patch
drivers-edac-add-edac_mc_find-api.patch
drivers-edac-add-rddr2-memory-types.patch
drivers-edac-split-out-functions-to-unique-files.patch
drivers-edac-add-edac_device-class.patch
drivers-edac-mc-sysfs-add-missing-mem-types.patch
drivers-edac-change-from-semaphore-to-mutex-operation.patch
drivers-edac-coreh-fix-scrubdefs.patch
drivers-edac-new-i82443bxgz-mc-driver.patch
drivers-edac-add-new-nmi-rescan.patch
drivers-edac-mod-use-edac_coreh.patch
drivers-edac-add-dev_name-getter-function.patch
drivers-edac-new-inte-30x0-mc-driver.patch
drivers-edac-mod-mc-to-use-workq-instead-of-kthread.patch
drivers-edac-updated-pci-monitoring.patch
drivers-edac-mod-assert_error-check.patch
drivers-edac-core-lindent-cleanup.patch
drivers-edac-edac_device-sysfs-cleanup.patch
drivers-edac-cleanup-workq-ifdefs.patch
drivers-edac-lindent-amd76x.patch
drivers-edac-lindent-i5000.patch
drivers-edac-lindent-e7xxx.patch
drivers-edac-lindent-i3000.patch
drivers-edac-lindent-i82860.patch
drivers-edac-lindent-i82875p.patch
drivers-edac-lindent-e752x.patch
drivers-edac-lindent-i82443bxgx.patch
drivers-edac-lindent-r82600.patch
drivers-edac-drivers-to-use-new-pci-operation.patch
drivers-edac-add-device-sysfs-attributes.patch
drivers-edac-device-output-clenaup.patch
drivers-edac-add-info-kconfig.patch
drivers-edac-update-maintainers-files-for-edac.patch
drivers-edac-cleanup-spaces-gotos-after-lindent-messup.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
